target/linux/ramips/dts/rt3050_edimax_3g-6200n.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/mtd/partitions/uimage.h>
   6
   7 / {
   8         compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
   9         model = "Edimax 3g-6200n";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         flash@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 label = "u-boot";
  31                                 reg = <0x0 0x30000>;
  32                                 read-only;
  33                         };
  34
  35                         partition@30000 {
  36                                 label = "u-boot-env";
  37                                 reg = <0x30000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         factory: partition@40000 {
  42                                 label = "factory";
  43                                 reg = <0x40000 0x10000>;
  44                                 read-only;
  45                         };
  46
  47                         partition@3e0000 {
  48                                 label = "cimage";
  49                                 reg = <0x3e0000 0x20000>;
  50                                 read-only;
  51                         };
  52
  53                         partition@50000 {
  54                                 compatible = "openwrt,uimage", "denx,uimage";
  55                                 openwrt,offset = <FW_EDIMAX_OFFSET>;
  56                                 openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
  57                                 label = "firmware";
  58                                 reg = <0x50000 0x390000>;
  59                         };
  60                 };
  61         };
  62
  63         leds {
  64                 compatible = "gpio-leds";
  65
  66                 led_power: power {
  67                         label = "green:power";
  68                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wlan {
  72                         label = "amber:wlan";
  73                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 3g {
  77                         label = "blue:3g";
  78                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  79                         trigger-sources = <&otg_port1>;
  80                         linux,default-trigger = "usbport";
  81                 };
  82         };
  83
  84         keys {
  85                 compatible = "gpio-keys-polled";
  86                 poll-interval = <20>;
  87
  88                 reset {
  89                         label = "reset";
  90                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  91                         linux,code = <KEY_RESTART>;
  92                 };
  93
  94                 rfkill {
  95                         label = "wlanswitch";
  96                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_RFKILL>;
  98                 };
  99         };
 100 };
 101
 102 &state_default {
 103         gpio {
 104                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 105                 function = "gpio";
 106         };
 107 };
 108
 109 &ethernet {
 110         mtd-mac-address = <&factory 0x4>;
 111 };
 112
 113 &esw {
 114         mediatek,portmap = <0x2f>;
 115 };
 116
 117 &wmac {
 118         ralink,mtd-eeprom = <&factory 0x0>;
 119 };
 120
 121 &otg {
 122         status = "okay";
 123 };