target/linux/ramips/dts/rt3052_asus_rt-n13u.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "asus,rt-n13u", "ralink,rt3052-soc";
   8         model = "Asus RT-N13U";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         flash@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x800000>;
  20                 bank-width = <2>;
  21                 device-width = <2>;
  22
  23                 partitions {
  24                         compatible = "fixed-partitions";
  25                         #address-cells = <1>;
  26                         #size-cells = <1>;
  27
  28                         partition@0 {
  29                                 label = "u-boot";
  30                                 reg = <0x0 0x30000>;
  31                                 read-only;
  32                         };
  33
  34                         partition@30000 {
  35                                 label = "u-boot-env";
  36                                 reg = <0x30000 0x10000>;
  37                                 read-only;
  38                         };
  39
  40                         factory: partition@40000 {
  41                                 label = "factory";
  42                                 reg = <0x40000 0x10000>;
  43                                 read-only;
  44                         };
  45
  46                         partition@50000 {
  47                                 compatible = "denx,uimage";
  48                                 label = "firmware";
  49                                 reg = <0x50000 0x7b0000>;
  50                         };
  51                 };
  52         };
  53
  54         leds {
  55                 compatible = "gpio-leds";
  56
  57                 led_power: power {
  58                         label = "blue:power";
  59                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 wifi {
  63                         label = "blue:wifi";
  64                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  65                 };
  66         };
  67
  68         keys {
  69                 compatible = "gpio-keys-polled";
  70                 poll-interval = <10>;
  71
  72                 reset {
  73                         label = "reset";
  74                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  75                         linux,code = <KEY_RESTART>;
  76                 };
  77
  78                 wps {
  79                         label = "wps";
  80                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  81                         linux,code = <KEY_WPS_BUTTON>;
  82                 };
  83         };
  84 };
  85
  86 &state_default {
  87         gpio {
  88                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  89                 function = "gpio";
  90         };
  91 };
  92
  93 &ethernet {
  94         mtd-mac-address = <&factory 0x28>;
  95 };
  96
  97 &esw {
  98         mediatek,portmap = <0x2f>;
  99 };
 100
 101 &wmac {
 102         ralink,mtd-eeprom = <&factory 0x0>;
 103 };
 104
 105 &otg {
 106         status = "okay";
 107 };