target/linux/ramips/dts/rt3052_belkin_f5d8235-v2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
  10         model = "Belkin F5D8235 v2";
  11
  12         aliases {
  13                 led-boot = &led_router;
  14                 led-failsafe = &led_router;
  15                 led-running = &led_router;
  16                 led-upgrade = &led_router;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         uboot: partition@0 {
  31                                 label = "uboot";
  32                                 reg = <0x0 0x50000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@50000 {
  37                                 compatible = "denx,uimage";
  38                                 label = "firmware";
  39                                 reg = <0x50000 0x790000>;
  40                         };
  41
  42                         partition@7e0000 {
  43                                 label = "nvram";
  44                                 reg = <0x7e0000 0x10000>;
  45                         };
  46
  47                         factory: partition@7f0000 {
  48                                 label = "factory";
  49                                 reg = <0x7f0000 0x10000>;
  50                         };
  51                 };
  52         };
  53
  54         rtl8366rb {
  55                 compatible = "realtek,rtl8366rb";
  56                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  57                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  58         };
  59
  60         leds {
  61                 compatible = "gpio-leds";
  62
  63                 internet {
  64                         label = "f5d8235-v2:blue:internet";
  65                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 internet2 {
  69                         label = "f5d8235-v2:amber:internet";
  70                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 modem {
  74                         label = "f5d8235-v2:blue:modem";
  75                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 modem2 {
  79                         label = "f5d8235-v2:amber:modem";
  80                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  81                 };
  82
  83                 led_router: router {
  84                         label = "f5d8235-v2:blue:router";
  85                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  86                 };
  87
  88                 storage {
  89                         label = "f5d8235-v2:blue:storage";
  90                         gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
  91                         trigger-sources = <&otg_port1>;
  92                         linux,default-trigger = "usbport";
  93                 };
  94
  95                 storage2 {
  96                         label = "f5d8235-v2:amber:storage";
  97                         gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
  98                 };
  99
 100                 security {
 101                         label = "f5d8235-v2:blue:security";
 102                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 103                 };
 104
 105                 security2 {
 106                         label = "f5d8235-v2:amber:security";
 107                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 108                 };
 109         };
 110 };
 111
 112 &pinctrl {
 113         state_default: pinctrl0 {
 114                 gpio {
 115                         ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
 116                         ralink,function = "gpio";
 117                 };
 118         };
 119 };
 120
 121 &ethernet {
 122         mtd-mac-address = <&uboot 0x40004>;
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&rgmii_pins>;
 125 };
 126
 127 &esw {
 128         ralink,rgmii = <1>;
 129         mediatek,portmap = <0x3f>;
 130         ralink,fct2 = <0x0002500c>;
 131         /*
 132          * ext phy base addr 31, rx/tx clock skew 0,
 133          * turbo mii off, rgmi 3.3v off, port 5 polling off
 134          * port5: enabled, gige, full-duplex, rx/tx-flow-control
 135          * port6: enabled, gige, full-duplex, rx/tx-flow-control
 136         */
 137         ralink,fpa2 = <0x1f003fff>;
 138 };
 139
 140 &wmac {
 141         ralink,mtd-eeprom = <&uboot 0x40000>;
 142 };
 143
 144 &otg {
 145         status = "okay";
 146 };