target/linux/ramips/dts/rt3883_trendnet_tew-691gr.dts

   1 #include "rt3883.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "trendnet,tew-691gr", "ralink,rt3883-soc";
   8         model = "TRENDnet TEW-691GR";
   9
  10         aliases {
  11                 led-boot = &led_wps;
  12                 led-failsafe = &led_wps;
  13                 led-running = &led_wps;
  14                 led-upgrade = &led_wps;
  15         };
  16
  17         flash@1c000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1c000000 0x800000>;
  20                 bank-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 reg = <0x0 0x0030000>;
  29                                 label = "u-boot";
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 reg = <0x00030000 0x00010000>;
  35                                 label = "u-boot-env";
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 reg = <0x00040000 0x00010000>;
  41                                 label = "factory";
  42                                 read-only;
  43                         };
  44
  45                         partition@50000 {
  46                                 compatible = "denx,uimage";
  47                                 reg = <0x00050000 0x007b0000>;
  48                                 label = "firmware";
  49                         };
  50                 };
  51         };
  52
  53         keys {
  54                 compatible = "gpio-keys-polled";
  55                 poll-interval = <100>;
  56
  57                 reset {
  58                         label = "reset";
  59                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_RESTART>;
  61                 };
  62
  63                 wps {
  64                         label = "wps";
  65                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_WPS_BUTTON>;
  67                 };
  68
  69                 rfkill {
  70                         label = "rfkill";
  71                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  72                         linux,code = <KEY_RFKILL>;
  73                 };
  74         };
  75
  76         leds {
  77                 compatible = "gpio-leds";
  78
  79                 led_wps: wps {
  80                         label = "green:wps";
  81                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84 };
  85
  86 &gpio1 {
  87         status = "okay";
  88 };
  89
  90 &state_default {
  91         gpio {
  92                 groups = "spi", "i2c", "jtag", "uartf";
  93                 function = "gpio";
  94         };
  95 };
  96
  97 &ethernet {
  98         mtd-mac-address = <&factory 0x4>;
  99
 100         port@0 {
 101                 phy-handle = <&phy0>;
 102                 phy-mode = "rgmii";
 103         };
 104
 105         mdio-bus {
 106                 status = "okay";
 107
 108                 phy0: ethernet-phy@0 {
 109                         reg = <0>;
 110                         phy-mode = "rgmii";
 111                 };
 112         };
 113 };
 114
 115 &wmac {
 116         status = "okay";
 117         ralink,mtd-eeprom = <&factory 0x0>;
 118         ralink,5ghz = <0>;
 119         mtd-mac-address = <&factory 0x4>;
 120         mtd-mac-address-increment = <1>;
 121 };