target/linux/ramips/dts/rt5350_poray_m3.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "poray,m3", "ralink,rt5350-soc";
   8         model = "Poray M3";
   9
  10         aliases {
  11                 led-boot = &led_status;
  12                 led-failsafe = &led_status;
  13                 led-running = &led_status;
  14                 led-upgrade = &led_status;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_status: status {
  21                         label = "blue:status";
  22                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                 };
  35
  36                 mode {
  37                         label = "mode";
  38                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  39                         linux,code = <BTN_0>;
  40                         linux,input-type = <EV_SW>;
  41                 };
  42         };
  43 };
  44
  45 &spi0 {
  46         status = "okay";
  47
  48         flash@0 {
  49                 compatible = "jedec,spi-nor";
  50                 reg = <0>;
  51                 spi-max-frequency = <10000000>;
  52
  53                 partitions {
  54                         compatible = "fixed-partitions";
  55                         #address-cells = <1>;
  56                         #size-cells = <1>;
  57
  58                         partition@0 {
  59                                 label = "u-boot";
  60                                 reg = <0x0 0x30000>;
  61                                 read-only;
  62                         };
  63
  64                         partition@30000 {
  65                                 label = "u-boot-env";
  66                                 reg = <0x30000 0x10000>;
  67                                 read-only;
  68                         };
  69
  70                         factory: partition@40000 {
  71                                 label = "factory";
  72                                 reg = <0x40000 0x10000>;
  73                                 read-only;
  74                         };
  75
  76                         partition@50000 {
  77                                 compatible = "denx,uimage";
  78                                 label = "firmware";
  79                                 reg = <0x50000 0x3b0000>;
  80                         };
  81                 };
  82         };
  83 };
  84
  85 &state_default {
  86         gpio {
  87                 groups = "i2c", "jtag", "uartf";
  88                 function = "gpio";
  89         };
  90 };
  91
  92 &ethernet {
  93         mtd-mac-address = <&factory 0x4>;
  94 };
  95
  96 &esw {
  97         mediatek,portmap = <0x2f>;
  98         mediatek,led_polarity = <1>;
  99 };
 100
 101 &wmac {
 102         ralink,mtd-eeprom = <&factory 0x0>;
 103         ralink,led-polarity = <1>;
 104 };