target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

   1 [ "$ACTION" == "add" ] || exit 0
   2
   3 PHYNBR=${DEVPATH##*/phy}
   4
   5 [ -n $PHYNBR ] || exit 0
   6
   7 . /lib/functions.sh
   8 . /lib/functions/system.sh
   9
  10 board=$(board_name)
  11
  12 case "$board" in
  13         beeline,smartbox-flash)
  14                 hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
  15                 [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  16                 hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 26)
  17                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 27)
  18                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
  19                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
  20                 ;;
  21         cudy,x6)
  22                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  23                 macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
  24                 ;;
  25         dlink,dap-x1860-a1)
  26                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  27                 [ "$PHYNBR" = "0" ] && \
  28                         macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
  29                 [ "$PHYNBR" = "1" ] && \
  30                         macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress
  31                 ;;
  32         dlink,dir-853-a3)
  33                 [ "$PHYNBR" = "0" ] && \
  34                         macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
  35                                 > /sys${DEVPATH}/macaddress
  36                 ;;
  37         dlink,dir-853-r1|\
  38         phicomm,k2p)
  39                 if [ "$PHYNBR" = "0" ]; then
  40                         base_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" -1)
  41                         macaddr_setbit_la "$base_mac" > /sys${DEVPATH}/macaddress
  42                 fi
  43                 ;;
  44         glinet,gl-mt1300)
  45                 [ "$PHYNBR" = "1" ] && \
  46                         macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
  47                 ;;
  48         h3c,tx1800-plus|\
  49         h3c,tx1801-plus|\
  50         h3c,tx1806)
  51                 addr=$(macaddr_setbit $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2) 7)
  52                 [ "$PHYNBR" = "0" ] && echo -n ${addr:0:9}'1'${addr:10:7} > /sys${DEVPATH}/macaddress
  53                 [ "$PHYNBR" = "1" ] && echo -n ${addr:0:9}'7'${addr:10:7} > /sys${DEVPATH}/macaddress
  54                 ;;
  55         haier,har-20s2u1|\
  56         jcg,y2|\
  57         sim,simax1800t)
  58                 [ "$PHYNBR" = "1" ] && \
  59                         macaddr_setbit_la "$(mtd_get_mac_binary factory 0x4)" > /sys${DEVPATH}/macaddress
  60                 ;;
  61         hiwifi,hc5962)
  62                 label_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
  63                 [ "$PHYNBR" = "0" ] && [ -n "$label_mac" ] && \
  64                 echo -n "$label_mac" > /sys${DEVPATH}/macaddress
  65                 [ "$PHYNBR" = "1" ] && [ -n "$label_mac" ] && \
  66                 macaddr_unsetbit "$label_mac" 6 > /sys${DEVPATH}/macaddress
  67                 ;;
  68         iptime,a3002mesh|\
  69         iptime,a3004t)
  70                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  71                 [ "$PHYNBR" = "0" ] && \
  72                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
  73                 [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  74                 ;;
  75         iptime,ax2004m)
  76                 if [ "$PHYNBR" = "1" ]; then
  77                         hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  78                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
  79                 fi
  80                 ;;
  81         jcg,q20)
  82                 [ "$PHYNBR" = "1" ] && \
  83                         macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress
  84                 ;;
  85         linksys,e5600|\
  86         linksys,ea6350-v4|\
  87         linksys,ea7300-v1|\
  88         linksys,ea7300-v2|\
  89         linksys,ea7500-v2|\
  90         linksys,ea8100-v1|\
  91         linksys,ea8100-v2)
  92                 hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
  93                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
  94                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  95                 ;;
  96         belkin,rt1800|\
  97         linksys,e7350)
  98                 hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr)
  99                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
 100                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 101                 ;;
 102         netgear,wax202)
 103                 hw_mac_addr=$(mtd_get_mac_ascii Config mac)
 104                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 105                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
 106                 ;;
 107         mts,wg430223)
 108                 hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
 109                 [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 110                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 26)
 111                 hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 27)
 112                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
 113                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
 114                 ;;
 115         oraybox,x3a)
 116                 if [ "$PHYNBR" = "1" ]; then
 117                         hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
 118                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
 119                 fi
 120                 ;;
 121         raisecom,msg1500-x-00)
 122                 [ "$PHYNBR" = "0" ] && \
 123                         macaddr_setbit_la "$(mtd_get_mac_ascii Config protest_lan_mac)" \
 124                                 > /sys${DEVPATH}/macaddress
 125                 ;;
 126         tenbay,t-mb5eu-v01)
 127                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
 128                 [ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
 129                 ;;
 130         tplink,eap615-wall-v1)
 131                 hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)"
 132                 macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress"
 133                 ;;
 134         yuncore,ax820)
 135                 [ "$PHYNBR" = "1" ] && \
 136                         macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
 137                 ;;
 138         yuncore,fap640|\
 139         yuncore,fap690)
 140                 hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
 141                 [ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 142                 [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 143                 ;;
 144         zyxel,nwa50ax|\
 145         zyxel,nwa55axe)
 146                 hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
 147                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
 148                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 149                 ;;
 150 esac