target/linux/ramips/patches-4.14/0043-spi-add-mt7621-support.patch

   1 From 87a5fcd57c577cd94b5b080deb98885077c13a42 Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Sun, 27 Jul 2014 09:49:07 +0100
   4 Subject: [PATCH 43/53] spi: add mt7621 support
   5
   6 Signed-off-by: John Crispin <blogic@openwrt.org>
   7 ---
   8  drivers/spi/Kconfig      |    6 +
   9  drivers/spi/Makefile     |    1 +
  10  drivers/spi/spi-mt7621.c |  480 ++++++++++++++++++++++++++++++++++++++++++++++
  11  3 files changed, 487 insertions(+)
  12  create mode 100644 drivers/spi/spi-mt7621.c
  13
  14 --- a/drivers/spi/Kconfig
  15 +++ b/drivers/spi/Kconfig
  16 @@ -569,6 +569,12 @@ config SPI_RT2880
  17         help
  18           This selects a driver for the Ralink RT288x/RT305x SPI Controller.
  19
  20 +config SPI_MT7621
  21 +       tristate "MediaTek MT7621 SPI Controller"
  22 +       depends on RALINK
  23 +       help
  24 +         This selects a driver for the MediaTek MT7621 SPI Controller.
  25 +
  26  config SPI_S3C24XX
  27         tristate "Samsung S3C24XX series SPI"
  28         depends on ARCH_S3C24XX
  29 --- a/drivers/spi/Makefile
  30 +++ b/drivers/spi/Makefile
  31 @@ -60,6 +60,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC)         += spi-mp
  32  obj-$(CONFIG_SPI_MPC52xx_PSC)          += spi-mpc52xx-psc.o
  33  obj-$(CONFIG_SPI_MPC52xx)              += spi-mpc52xx.o
  34  obj-$(CONFIG_SPI_MT65XX)                += spi-mt65xx.o
  35 +obj-$(CONFIG_SPI_MT7621)               += spi-mt7621.o
  36  obj-$(CONFIG_SPI_MXS)                  += spi-mxs.o
  37  obj-$(CONFIG_SPI_NUC900)               += spi-nuc900.o
  38  obj-$(CONFIG_SPI_OC_TINY)              += spi-oc-tiny.o
  39 --- /dev/null
  40 +++ b/drivers/spi/spi-mt7621.c
  41 @@ -0,0 +1,491 @@
  42 +/*
  43 + * spi-mt7621.c -- MediaTek MT7621 SPI controller driver
  44 + *
  45 + * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
  46 + * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
  47 + * Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
  48 + *
  49 + * Some parts are based on spi-orion.c:
  50 + *   Author: Shadi Ammouri <shadi@marvell.com>
  51 + *   Copyright (C) 2007-2008 Marvell Ltd.
  52 + *
  53 + * This program is free software; you can redistribute it and/or modify
  54 + * it under the terms of the GNU General Public License version 2 as
  55 + * published by the Free Software Foundation.
  56 + */
  57 +
  58 +#include <linux/init.h>
  59 +#include <linux/module.h>
  60 +#include <linux/clk.h>
  61 +#include <linux/err.h>
  62 +#include <linux/delay.h>
  63 +#include <linux/io.h>
  64 +#include <linux/reset.h>
  65 +#include <linux/spi/spi.h>
  66 +#include <linux/of_device.h>
  67 +#include <linux/platform_device.h>
  68 +#include <linux/swab.h>
  69 +
  70 +#include <ralink_regs.h>
  71 +
  72 +#define SPI_BPW_MASK(bits) BIT((bits) - 1)
  73 +
  74 +#define DRIVER_NAME                    "spi-mt7621"
  75 +/* in usec */
  76 +#define RALINK_SPI_WAIT_MAX_LOOP       2000
  77 +
  78 +/* SPISTAT register bit field */
  79 +#define SPISTAT_BUSY                   BIT(0)
  80 +
  81 +#define MT7621_SPI_TRANS       0x00
  82 +#define SPITRANS_BUSY          BIT(16)
  83 +
  84 +#define MT7621_SPI_OPCODE      0x04
  85 +#define MT7621_SPI_DATA0       0x08
  86 +#define MT7621_SPI_DATA4       0x18
  87 +#define SPI_CTL_TX_RX_CNT_MASK 0xff
  88 +#define SPI_CTL_START          BIT(8)
  89 +
  90 +#define MT7621_SPI_POLAR       0x38
  91 +#define MT7621_SPI_MASTER      0x28
  92 +#define MT7621_SPI_MOREBUF     0x2c
  93 +#define MT7621_SPI_SPACE       0x3c
  94 +
  95 +#define MT7621_CPHA            BIT(5)
  96 +#define MT7621_CPOL            BIT(4)
  97 +#define MT7621_LSB_FIRST       BIT(3)
  98 +
  99 +#define RT2880_SPI_MODE_BITS   (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
 100 +
 101 +struct mt7621_spi;
 102 +
 103 +struct mt7621_spi {
 104 +       struct spi_master       *master;
 105 +       void __iomem            *base;
 106 +       unsigned int            sys_freq;
 107 +       unsigned int            speed;
 108 +       struct clk              *clk;
 109 +       spinlock_t              lock;
 110 +
 111 +       struct mt7621_spi_ops   *ops;
 112 +};
 113 +
 114 +static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi)
 115 +{
 116 +       return spi_master_get_devdata(spi->master);
 117 +}
 118 +
 119 +static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg)
 120 +{
 121 +       return ioread32(rs->base + reg);
 122 +}
 123 +
 124 +static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val)
 125 +{
 126 +       iowrite32(val, rs->base + reg);
 127 +}
 128 +
 129 +static void mt7621_spi_reset(struct mt7621_spi *rs, int duplex)
 130 +{
 131 +       u32 master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
 132 +
 133 +       master |= 7 << 29;
 134 +       master |= 1 << 2;
 135 +       if (duplex)
 136 +               master |= 1 << 10;
 137 +       else
 138 +               master &= ~(1 << 10);
 139 +
 140 +       mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
 141 +}
 142 +
 143 +static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
 144 +{
 145 +       struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
 146 +       int cs = spi->chip_select;
 147 +       u32 polar = 0;
 148 +
 149 +        mt7621_spi_reset(rs, cs);
 150 +       if (enable)
 151 +               polar = BIT(cs);
 152 +       mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
 153 +}
 154 +
 155 +static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed)
 156 +{
 157 +       struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
 158 +       u32 rate;
 159 +       u32 reg;
 160 +
 161 +       dev_dbg(&spi->dev, "speed:%u\n", speed);
 162 +
 163 +       rate = DIV_ROUND_UP(rs->sys_freq, speed);
 164 +       dev_dbg(&spi->dev, "rate-1:%u\n", rate);
 165 +
 166 +       if (rate > 4097)
 167 +               return -EINVAL;
 168 +
 169 +       if (rate < 2)
 170 +               rate = 2;
 171 +
 172 +       reg = mt7621_spi_read(rs, MT7621_SPI_MASTER);
 173 +       reg &= ~(0xfff << 16);
 174 +       reg |= (rate - 2) << 16;
 175 +       rs->speed = speed;
 176 +
 177 +       reg &= ~MT7621_LSB_FIRST;
 178 +       if (spi->mode & SPI_LSB_FIRST)
 179 +               reg |= MT7621_LSB_FIRST;
 180 +
 181 +       reg &= ~(MT7621_CPHA | MT7621_CPOL);
 182 +       switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
 183 +               case SPI_MODE_0:
 184 +                       break;
 185 +               case SPI_MODE_1:
 186 +                       reg |= MT7621_CPHA;
 187 +                       break;
 188 +               case SPI_MODE_2:
 189 +                       reg |= MT7621_CPOL;
 190 +                       break;
 191 +               case SPI_MODE_3:
 192 +                       reg |= MT7621_CPOL | MT7621_CPHA;
 193 +                       break;
 194 +       }
 195 +       mt7621_spi_write(rs, MT7621_SPI_MASTER, reg);
 196 +
 197 +       return 0;
 198 +}
 199 +
 200 +static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
 201 +{
 202 +       struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
 203 +       int i;
 204 +
 205 +       for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
 206 +               u32 status;
 207 +
 208 +               status = mt7621_spi_read(rs, MT7621_SPI_TRANS);
 209 +               if ((status & SPITRANS_BUSY) == 0) {
 210 +                       return 0;
 211 +               }
 212 +               cpu_relax();
 213 +               udelay(1);
 214 +       }
 215 +
 216 +       return -ETIMEDOUT;
 217 +}
 218 +
 219 +static int mt7621_spi_transfer_half_duplex(struct spi_master *master,
 220 +                                          struct spi_message *m)
 221 +{
 222 +       struct mt7621_spi *rs = spi_master_get_devdata(master);
 223 +       struct spi_device *spi = m->spi;
 224 +       unsigned int speed = spi->max_speed_hz;
 225 +       struct spi_transfer *t = NULL;
 226 +       int status = 0;
 227 +       int i, len = 0;
 228 +       int rx_len = 0;
 229 +       u32 data[9] = { 0 };
 230 +       u32 val;
 231 +
 232 +       mt7621_spi_wait_till_ready(spi);
 233 +
 234 +       list_for_each_entry(t, &m->transfers, transfer_list) {
 235 +               const u8 *buf = t->tx_buf;
 236 +
 237 +               if (t->rx_buf)
 238 +                       rx_len += t->len;
 239 +
 240 +               if (!buf)
 241 +                       continue;
 242 +
 243 +               if (t->speed_hz < speed)
 244 +                       speed = t->speed_hz;
 245 +
 246 +               /*
 247 +                * m25p80 might attempt to write more data than we can handle.
 248 +                * truncate the message to what we can fit into the registers
 249 +                */
 250 +               if (len + t->len > 36)
 251 +                       t->len = 36 - len;
 252 +
 253 +               for (i = 0; i < t->len; i++, len++)
 254 +                       data[len / 4] |= buf[i] << (8 * (len & 3));
 255 +       }
 256 +
 257 +       if (WARN_ON(rx_len > 32)) {
 258 +               status = -EIO;
 259 +               goto msg_done;
 260 +       }
 261 +
 262 +       if (mt7621_spi_prepare(spi, speed)) {
 263 +               status = -EIO;
 264 +               goto msg_done;
 265 +       }
 266 +       data[0] = swab32(data[0]);
 267 +       if (len < 4)
 268 +               data[0] >>= (4 - len) * 8;
 269 +
 270 +       for (i = 0; i < len; i += 4)
 271 +               mt7621_spi_write(rs, MT7621_SPI_OPCODE + i, data[i / 4]);
 272 +
 273 +       val = (min_t(int, len, 4) * 8) << 24;
 274 +       if (len > 4)
 275 +               val |= (len - 4) * 8;
 276 +       val |= (rx_len * 8) << 12;
 277 +       mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
 278 +
 279 +       mt7621_spi_set_cs(spi, 1);
 280 +
 281 +       val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
 282 +       val |= SPI_CTL_START;
 283 +       mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
 284 +
 285 +       mt7621_spi_wait_till_ready(spi);
 286 +
 287 +       mt7621_spi_set_cs(spi, 0);
 288 +
 289 +       for (i = 0; i < rx_len; i += 4)
 290 +               data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
 291 +
 292 +       m->actual_length = len + rx_len;
 293 +
 294 +       len = 0;
 295 +       list_for_each_entry(t, &m->transfers, transfer_list) {
 296 +               u8 *buf = t->rx_buf;
 297 +
 298 +               if (!buf)
 299 +                       continue;
 300 +
 301 +               for (i = 0; i < t->len; i++, len++)
 302 +                       buf[i] = data[len / 4] >> (8 * (len & 3));
 303 +       }
 304 +
 305 +msg_done:
 306 +       m->status = status;
 307 +       spi_finalize_current_message(master);
 308 +
 309 +       return 0;
 310 +}
 311 +
 312 +static int mt7621_spi_transfer_full_duplex(struct spi_master *master,
 313 +                                          struct spi_message *m)
 314 +{
 315 +       struct mt7621_spi *rs = spi_master_get_devdata(master);
 316 +       struct spi_device *spi = m->spi;
 317 +       unsigned int speed = spi->max_speed_hz;
 318 +       struct spi_transfer *t = NULL;
 319 +       int status = 0;
 320 +       int i, len = 0;
 321 +       int rx_len = 0;
 322 +       u32 data[9] = { 0 };
 323 +       u32 val = 0;
 324 +
 325 +       mt7621_spi_wait_till_ready(spi);
 326 +
 327 +       list_for_each_entry(t, &m->transfers, transfer_list) {
 328 +               const u8 *buf = t->tx_buf;
 329 +
 330 +               if (t->rx_buf)
 331 +                       rx_len += t->len;
 332 +
 333 +               if (!buf)
 334 +                       continue;
 335 +
 336 +               if (WARN_ON(len + t->len > 16)) {
 337 +                       status = -EIO;
 338 +                       goto msg_done;
 339 +               }
 340 +
 341 +               for (i = 0; i < t->len; i++, len++)
 342 +                       data[len / 4] |= buf[i] << (8 * (len & 3));
 343 +               if (speed > t->speed_hz)
 344 +                       speed = t->speed_hz;
 345 +       }
 346 +
 347 +       if (WARN_ON(rx_len > 16)) {
 348 +               status = -EIO;
 349 +               goto msg_done;
 350 +       }
 351 +
 352 +       if (mt7621_spi_prepare(spi, speed)) {
 353 +               status = -EIO;
 354 +               goto msg_done;
 355 +       }
 356 +
 357 +       for (i = 0; i < len; i += 4)
 358 +               mt7621_spi_write(rs, MT7621_SPI_DATA0 + i, data[i / 4]);
 359 +
 360 +       val |= len * 8;
 361 +       val |= (rx_len * 8) << 12;
 362 +       mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
 363 +
 364 +       mt7621_spi_set_cs(spi, 1);
 365 +
 366 +       val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
 367 +       val |= SPI_CTL_START;
 368 +       mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
 369 +
 370 +       mt7621_spi_wait_till_ready(spi);
 371 +
 372 +       mt7621_spi_set_cs(spi, 0);
 373 +
 374 +       for (i = 0; i < rx_len; i += 4)
 375 +               data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA4 + i);
 376 +
 377 +       m->actual_length = rx_len;
 378 +
 379 +       len = 0;
 380 +       list_for_each_entry(t, &m->transfers, transfer_list) {
 381 +               u8 *buf = t->rx_buf;
 382 +
 383 +               if (!buf)
 384 +                       continue;
 385 +
 386 +               for (i = 0; i < t->len; i++, len++)
 387 +                       buf[i] = data[len / 4] >> (8 * (len & 3));
 388 +       }
 389 +
 390 +msg_done:
 391 +       m->status = status;
 392 +       spi_finalize_current_message(master);
 393 +
 394 +       return 0;
 395 +}
 396 +
 397 +static int mt7621_spi_transfer_one_message(struct spi_master *master,
 398 +                                          struct spi_message *m)
 399 +{
 400 +       struct spi_device *spi = m->spi;
 401 +       int cs = spi->chip_select;
 402 +
 403 +       if (cs)
 404 +               return mt7621_spi_transfer_full_duplex(master, m);
 405 +       return mt7621_spi_transfer_half_duplex(master, m);
 406 +}
 407 +
 408 +static int mt7621_spi_setup(struct spi_device *spi)
 409 +{
 410 +       struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
 411 +
 412 +       if ((spi->max_speed_hz == 0) ||
 413 +               (spi->max_speed_hz > (rs->sys_freq / 2)))
 414 +               spi->max_speed_hz = (rs->sys_freq / 2);
 415 +
 416 +       if (spi->max_speed_hz < (rs->sys_freq / 4097)) {
 417 +               dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
 418 +                       spi->max_speed_hz);
 419 +               return -EINVAL;
 420 +       }
 421 +
 422 +       return 0;
 423 +}
 424 +
 425 +static const struct of_device_id mt7621_spi_match[] = {
 426 +       { .compatible = "ralink,mt7621-spi" },
 427 +       {},
 428 +};
 429 +MODULE_DEVICE_TABLE(of, mt7621_spi_match);
 430 +
 431 +static size_t mt7621_max_transfer_size(struct spi_device *spi)
 432 +{
 433 +       return 32;
 434 +}
 435 +
 436 +static int mt7621_spi_probe(struct platform_device *pdev)
 437 +{
 438 +       const struct of_device_id *match;
 439 +       struct spi_master *master;
 440 +       struct mt7621_spi *rs;
 441 +       unsigned long flags;
 442 +       void __iomem *base;
 443 +       struct resource *r;
 444 +       int status = 0;
 445 +       struct clk *clk;
 446 +       struct mt7621_spi_ops *ops;
 447 +
 448 +       match = of_match_device(mt7621_spi_match, &pdev->dev);
 449 +       if (!match)
 450 +               return -EINVAL;
 451 +       ops = (struct mt7621_spi_ops *)match->data;
 452 +
 453 +       r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 454 +       base = devm_ioremap_resource(&pdev->dev, r);
 455 +       if (IS_ERR(base))
 456 +               return PTR_ERR(base);
 457 +
 458 +       clk = devm_clk_get(&pdev->dev, NULL);
 459 +       if (IS_ERR(clk)) {
 460 +               dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
 461 +                       status);
 462 +               return PTR_ERR(clk);
 463 +       }
 464 +
 465 +       status = clk_prepare_enable(clk);
 466 +       if (status)
 467 +               return status;
 468 +
 469 +       master = spi_alloc_master(&pdev->dev, sizeof(*rs));
 470 +       if (master == NULL) {
 471 +               dev_info(&pdev->dev, "master allocation failed\n");
 472 +               return -ENOMEM;
 473 +       }
 474 +
 475 +       master->mode_bits = RT2880_SPI_MODE_BITS;
 476 +
 477 +       master->setup = mt7621_spi_setup;
 478 +       master->transfer_one_message = mt7621_spi_transfer_one_message;
 479 +       master->bits_per_word_mask = SPI_BPW_MASK(8);
 480 +       master->dev.of_node = pdev->dev.of_node;
 481 +       master->num_chipselect = 2;
 482 +       master->max_transfer_size = mt7621_max_transfer_size;
 483 +
 484 +       dev_set_drvdata(&pdev->dev, master);
 485 +
 486 +       rs = spi_master_get_devdata(master);
 487 +       rs->base = base;
 488 +       rs->clk = clk;
 489 +       rs->master = master;
 490 +       rs->sys_freq = clk_get_rate(rs->clk);
 491 +       rs->ops = ops;
 492 +       dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
 493 +       spin_lock_irqsave(&rs->lock, flags);
 494 +
 495 +       device_reset(&pdev->dev);
 496 +
 497 +       mt7621_spi_reset(rs, 0);
 498 +
 499 +       return spi_register_master(master);
 500 +}
 501 +
 502 +static int mt7621_spi_remove(struct platform_device *pdev)
 503 +{
 504 +       struct spi_master *master;
 505 +       struct mt7621_spi *rs;
 506 +
 507 +       master = dev_get_drvdata(&pdev->dev);
 508 +       rs = spi_master_get_devdata(master);
 509 +
 510 +       clk_disable(rs->clk);
 511 +       spi_unregister_master(master);
 512 +
 513 +       return 0;
 514 +}
 515 +
 516 +MODULE_ALIAS("platform:" DRIVER_NAME);
 517 +
 518 +static struct platform_driver mt7621_spi_driver = {
 519 +       .driver = {
 520 +               .name = DRIVER_NAME,
 521 +               .owner = THIS_MODULE,
 522 +               .of_match_table = mt7621_spi_match,
 523 +       },
 524 +       .probe = mt7621_spi_probe,
 525 +       .remove = mt7621_spi_remove,
 526 +};
 527 +
 528 +module_platform_driver(mt7621_spi_driver);
 529 +
 530 +MODULE_DESCRIPTION("MT7621 SPI driver");
 531 +MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
 532 +MODULE_LICENSE("GPL");