target/linux/sunxi/base-files/lib/firmware/brcm/brcmfmac43362-sdio.txt

   1 #AP6181_NVRAM_V1.1_01152013
   2 #adjuest PA parameter for g/n mode
   3 manfid=0x2d0
   4 prodid=0x492
   5 vendid=0x14e4
   6 devid=0x4343
   7 boardtype=0x0598
   8
   9 # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
  10 #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
  11 boardrev=0x1307
  12 boardnum=777
  13 xtalfreq=26000
  14 boardflags=0xa00
  15 sromrev=3
  16 wl0id=0x431b
  17 macaddr=00:90:4c:07:71:12
  18 aa2g=1
  19 ag0=2
  20 maxp2ga0=74
  21 cck2gpo=0x2222
  22 ofdm2gpo=0x66666666
  23 mcs2gpo0=0x7777
  24 mcs2gpo1=0x7777
  25 pa0maxpwr=56
  26
  27 #P207 PA params
  28 #pa0b0=5447
  29 #pa0b1=-658
  30 #pa0b2=-175<div></div>
  31
  32 #Same PA params for P304,P305, P306, P307
  33
  34 pa0b0=5447
  35 pa0b1=-607
  36 pa0b2=-160
  37 pa0itssit=62
  38 pa1itssit=62
  39
  40
  41 cckPwrOffset=5
  42 ccode=0
  43 rssismf2g=0xa
  44 rssismc2g=0x3
  45 rssisav2g=0x7
  46 triso2g=0
  47 noise_cal_enable_2g=0
  48 noise_cal_po_2g=0
  49 swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
  50 temp_add=29767
  51 temp_mult=425