sunxi: base files: add AP6212 (brcm43430) NVRAM
[openwrt/openwrt.git] / target / linux / sunxi / base-files / lib / firmware / brcm / brcmfmac43430-sdio.txt
1 #AP6212_NVRAM_V1.0_20140603
2 # 2.4 GHz, 20 MHz BW mode
3
4 # The following parameter values are just placeholders, need to be updated.
5 manfid=0x2d0
6 prodid=0x0726
7 vendid=0x14e4
8 devid=0x43e2
9 boardtype=0x0726
10 boardrev=0x1101
11 boardnum=22
12 macaddr=00:90:4c:c5:12:38
13 sromrev=11
14 boardflags=0x00404201
15 xtalfreq=26000
16 nocrc=1
17 ag0=255
18 aa2g=1
19 ccode=ALL
20
21 pa0itssit=0x20
22 extpagain2g=0
23
24 #PA parameters for 2.4GHz, measured at CHIP OUTPUT
25 pa2ga0=-168,7161,-820
26 AvVmid_c0=0x0,0xc8
27 cckpwroffset0=5
28
29 # PPR params
30 maxp2ga0=90
31 txpwrbckof=6
32 cckbw202gpo=0x5555
33 legofdmbw202gpo=0x77777777
34 mcsbw202gpo=0xaaaaaaaa
35
36 # OFDM IIR :
37 ofdmdigfilttype=7
38 # PAPD mode:
39 papdmode=2
40
41 il0macaddr=00:90:4c:c5:12:38
42 wl0id=0x431b
43
44 #OOB parameters
45 hostwake=0x40
46 hostrdy=0x41
47 usbrdy=0x03
48 usbrdydelay=100
49 deadman_to=0xffffffff
50 # muxenab: 0x1 for UART enable, 0x10 for Host awake
51 muxenab=0x10
52 # CLDO PWM voltage settings - 0x4 - 1.1 volt
53 #cldo_pwm=0x4