sunxi: use upstream patch for Orange Pi R1
[openwrt/openwrt.git] / target / linux / sunxi / patches-4.14 / 060-ARM-dts-sun8i-add-support-for-Orange-Pi-R1.patch
1 From 74942cd5dfe4ac4fd982fe58118bc69346a2bd18 Mon Sep 17 00:00:00 2001
2 From: Icenowy Zheng <icenowy@aosc.io>
3 Date: Sun, 12 Nov 2017 20:41:29 +0800
4 Subject: [PATCH] ARM: dts: sun8i: add support for Orange Pi R1
5
6 Orange Pi R1 is a board design based on Orange Pi Zero, with XR819 Wi-Fi
7 chip replaced by RTL8189ETV Wi-Fi module and the USB Type-A jack
8 replaced by an onboard USB RTL8152B USB-Ethernet adapter.
9
10 Add support for it.
11
12 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
13 Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
14 ---
15 arch/arm/boot/dts/Makefile | 1 +
16 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 73 +++++++++++++++++++++++++
17 2 files changed, 74 insertions(+)
18 create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
19
20 --- a/arch/arm/boot/dts/Makefile
21 +++ b/arch/arm/boot/dts/Makefile
22 @@ -916,6 +916,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
23 sun8i-a83t-allwinner-h8homlet-v2.dtb \
24 sun8i-a83t-bananapi-m3.dtb \
25 sun8i-a83t-cubietruck-plus.dtb \
26 + sun8i-h2-plus-orangepi-r1.dtb \
27 sun8i-h2-plus-orangepi-zero.dtb \
28 sun8i-h3-bananapi-m2-plus.dtb \
29 sun8i-h3-beelink-x2.dtb \
30 --- /dev/null
31 +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
32 @@ -0,0 +1,73 @@
33 +/*
34 + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
35 + *
36 + * This file is dual-licensed: you can use it either under the terms
37 + * of the GPL or the X11 license, at your option. Note that this dual
38 + * licensing only applies to this file, and not this project as a
39 + * whole.
40 + *
41 + * a) This file is free software; you can redistribute it and/or
42 + * modify it under the terms of the GNU General Public License as
43 + * published by the Free Software Foundation; either version 2 of the
44 + * License, or (at your option) any later version.
45 + *
46 + * This file is distributed in the hope that it will be useful,
47 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
48 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
49 + * GNU General Public License for more details.
50 + *
51 + * Or, alternatively,
52 + *
53 + * b) Permission is hereby granted, free of charge, to any person
54 + * obtaining a copy of this software and associated documentation
55 + * files (the "Software"), to deal in the Software without
56 + * restriction, including without limitation the rights to use,
57 + * copy, modify, merge, publish, distribute, sublicense, and/or
58 + * sell copies of the Software, and to permit persons to whom the
59 + * Software is furnished to do so, subject to the following
60 + * conditions:
61 + *
62 + * The above copyright notice and this permission notice shall be
63 + * included in all copies or substantial portions of the Software.
64 + *
65 + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
66 + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
67 + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
68 + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
69 + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
70 + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
71 + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
72 + * OTHER DEALINGS IN THE SOFTWARE.
73 + */
74 +
75 +/* Orange Pi R1 is based on Orange Pi Zero design */
76 +#include "sun8i-h2-plus-orangepi-zero.dts"
77 +
78 +/ {
79 + model = "Xunlong Orange Pi R1";
80 + compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
81 +
82 + /delete-node/ reg_vcc_wifi;
83 +
84 + aliases {
85 + ethernet1 = &rtl8189etv;
86 + };
87 +};
88 +
89 +&ohci1 {
90 + /*
91 + * RTL8152B USB-Ethernet adapter is connected to USB1,
92 + * and it's a USB 2.0 device. So the OHCI1 controller
93 + * can be left disabled.
94 + */
95 + status = "disabled";
96 +};
97 +
98 +&mmc1 {
99 + vmmc-supply = <&reg_vcc3v3>;
100 + vqmmc-supply = <&reg_vcc3v3>;
101 +
102 + rtl8189etv: sdio_wifi@1 {
103 + reg = <1>;
104 + };
105 +};