target/linux/sunxi/patches-4.9/131-reset-add-h3-resets.patch

   1 From 5f0bb9d0bc545ef53a83f7bd176fdc0736eed8e5 Mon Sep 17 00:00:00 2001
   2 From: Jens Kuske <jenskuske@gmail.com>
   3 Date: Tue, 27 Oct 2015 17:50:24 +0100
   4 Subject: [PATCH] reset: sunxi: Add Allwinner H3 bus resets
   5
   6 The H3 bus resets have some holes between the registers, so we add
   7 an of_xlate() function to skip them according to the datasheet.
   8
   9 Signed-off-by: Jens Kuske <jenskuske@gmail.com>
  10 ---
  11  .../bindings/reset/allwinner,sunxi-clock-reset.txt |  1 +
  12  drivers/reset/reset-sunxi.c                        | 30 +++++++++++++++++++---
  13  2 files changed, 28 insertions(+), 3 deletions(-)
  14
  15 --- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
  16 +++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
  17 @@ -8,6 +8,7 @@ Required properties:
  18  - compatible: Should be one of the following:
  19    "allwinner,sun6i-a31-ahb1-reset"
  20    "allwinner,sun6i-a31-clock-reset"
  21 +  "allwinner,sun8i-h3-bus-reset"
  22  - reg: should be register base and length as documented in the
  23    datasheet
  24  - #reset-cells: 1, see below
  25 --- a/drivers/reset/reset-sunxi.c
  26 +++ b/drivers/reset/reset-sunxi.c
  27 @@ -75,7 +75,9 @@ static const struct reset_control_ops su
  28         .deassert       = sunxi_reset_deassert,
  29  };
  30
  31 -static int sunxi_reset_init(struct device_node *np)
  32 +static int sunxi_reset_init(struct device_node *np,
  33 +                           int (*of_xlate)(struct reset_controller_dev *rcdev,
  34 +                                   const struct of_phandle_args *reset_spec))
  35  {
  36         struct sunxi_reset_data *data;
  37         struct resource res;
  38 @@ -108,6 +110,7 @@ static int sunxi_reset_init(struct devic
  39         data->rcdev.nr_resets = size * 32;
  40         data->rcdev.ops = &sunxi_reset_ops;
  41         data->rcdev.of_node = np;
  42 +       data->rcdev.of_xlate = of_xlate;
  43
  44         return reset_controller_register(&data->rcdev);
  45
  46 @@ -116,6 +119,21 @@ err_alloc:
  47         return ret;
  48  };
  49
  50 +static int sun8i_h3_bus_reset_xlate(struct reset_controller_dev *rcdev,
  51 +                                   const struct of_phandle_args *reset_spec)
  52 +{
  53 +       unsigned int index = reset_spec->args[0];
  54 +
  55 +       if (index < 96)
  56 +               return index;
  57 +       else if (index < 128)
  58 +               return index + 32;
  59 +       else if (index < 160)
  60 +               return index + 64;
  61 +       else
  62 +               return -EINVAL;
  63 +}
  64 +
  65  /*
  66   * These are the reset controller we need to initialize early on in
  67   * our system, before we can even think of using a regular device
  68 @@ -123,15 +141,21 @@ err_alloc:
  69   */
  70  static const struct of_device_id sunxi_early_reset_dt_ids[] __initconst = {
  71         { .compatible = "allwinner,sun6i-a31-ahb1-reset", },
  72 +       { .compatible = "allwinner,sun8i-h3-bus-reset", .data = sun8i_h3_bus_reset_xlate, },
  73         { /* sentinel */ },
  74  };
  75
  76  void __init sun6i_reset_init(void)
  77  {
  78         struct device_node *np;
  79 -
  80 -       for_each_matching_node(np, sunxi_early_reset_dt_ids)
  81 -               sunxi_reset_init(np);
  82 +       const struct of_device_id *match;
  83 +       int (*of_xlate)(struct reset_controller_dev *rcdev,
  84 +                       const struct of_phandle_args *reset_spec);
  85 +
  86 +       for_each_matching_node_and_match(np, sunxi_early_reset_dt_ids, &match) {
  87 +               of_xlate = match->data;
  88 +               sunxi_reset_init(np, of_xlate);
  89 +       }
  90  }
  91
  92  /*