2 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
8 1. Redistributions of source code must retain the above copyright notice,
9 this list of conditions and the following disclaimer.
10 2. Redistributions in binary form must reproduce the above copyright notice,
11 this list of conditions and the following disclaimer in the documentation
12 and/or other materials provided with the distribution.
14 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
17 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
18 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
20 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
21 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
23 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 Image generation tool for the TP-LINK SafeLoader as seen on
31 TP-LINK Pharos devices (CPE210/220/510/520)
45 #include <arpa/inet.h>
47 #include <sys/types.h>
54 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
57 #define MAX_PARTITIONS 32
59 /** An image partition table entry */
60 struct image_partition_entry
{
66 /** A flash partition table entry */
67 struct flash_partition_entry
{
73 /** Partition trailing padding definitions
74 * Values 0x00 to 0xff are reserved to indicate the padding value
75 * Values from 0x100 are reserved to indicate other behaviour */
76 enum partition_trail_value
{
79 PART_TRAIL_MAX
= 0xff,
80 PART_TRAIL_NONE
= 0x100
83 /** Firmware layout description */
87 const char *support_list
;
88 enum partition_trail_value part_trail
;
90 uint32_t soft_ver_compat_level
;
91 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
92 const char *first_sysupgrade_partition
;
93 const char *last_sysupgrade_partition
;
96 struct __attribute__((__packed__
)) meta_header
{
101 /** The content of the soft-version structure */
102 struct __attribute__((__packed__
)) soft_version
{
104 uint8_t version_major
;
105 uint8_t version_minor
;
106 uint8_t version_patch
;
112 uint32_t compat_level
;
116 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
120 Salt for the MD5 hash
122 Fortunately, TP-LINK seems to use the same salt for most devices which use
123 the new image format.
125 static const uint8_t md5_salt
[16] = {
126 0x7a, 0x2b, 0x15, 0xed,
127 0x9b, 0x98, 0x59, 0x6d,
128 0xe5, 0x04, 0xab, 0x44,
129 0xac, 0x2a, 0x9f, 0x4e,
133 /** Firmware layout table */
134 static struct device_info boards
[] = {
135 /** Firmware layout for the CPE210/220 V1 */
138 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
141 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
142 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
143 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
144 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
145 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
146 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
147 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
152 {"fs-uboot", 0x00000, 0x20000},
153 {"partition-table", 0x20000, 0x02000},
154 {"default-mac", 0x30000, 0x00020},
155 {"product-info", 0x31100, 0x00100},
156 {"signature", 0x32000, 0x00400},
157 {"os-image", 0x40000, 0x300000},
158 {"file-system", 0x340000, 0x470000},
159 {"soft-version", 0x7b0000, 0x00100},
160 {"support-list", 0x7b1000, 0x00400},
161 {"user-config", 0x7c0000, 0x10000},
162 {"default-config", 0x7d0000, 0x10000},
163 {"log", 0x7e0000, 0x10000},
164 {"radio", 0x7f0000, 0x10000},
168 .first_sysupgrade_partition
= "os-image",
169 .last_sysupgrade_partition
= "support-list",
172 /** Firmware layout for the CPE210 V2 */
175 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
178 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
179 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
180 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
181 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
182 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
183 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
184 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
185 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
186 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
187 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
192 {"fs-uboot", 0x00000, 0x20000},
193 {"partition-table", 0x20000, 0x02000},
194 {"default-mac", 0x30000, 0x00020},
195 {"product-info", 0x31100, 0x00100},
196 {"device-info", 0x31400, 0x00400},
197 {"signature", 0x32000, 0x00400},
198 {"device-id", 0x33000, 0x00100},
199 {"firmware", 0x40000, 0x770000},
200 {"soft-version", 0x7b0000, 0x00100},
201 {"support-list", 0x7b1000, 0x01000},
202 {"user-config", 0x7c0000, 0x10000},
203 {"default-config", 0x7d0000, 0x10000},
204 {"log", 0x7e0000, 0x10000},
205 {"radio", 0x7f0000, 0x10000},
209 .first_sysupgrade_partition
= "os-image",
210 .last_sysupgrade_partition
= "support-list",
213 /** Firmware layout for the CPE210 V3 */
216 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
219 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
220 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
221 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
222 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
223 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
224 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
225 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
226 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
227 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
228 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
229 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
234 {"fs-uboot", 0x00000, 0x20000},
235 {"partition-table", 0x20000, 0x01000},
236 {"default-mac", 0x30000, 0x00020},
237 {"product-info", 0x31100, 0x00100},
238 {"device-info", 0x31400, 0x00400},
239 {"signature", 0x32000, 0x00400},
240 {"device-id", 0x33000, 0x00100},
241 {"firmware", 0x40000, 0x770000},
242 {"soft-version", 0x7b0000, 0x00100},
243 {"support-list", 0x7b1000, 0x01000},
244 {"user-config", 0x7c0000, 0x10000},
245 {"default-config", 0x7d0000, 0x10000},
246 {"log", 0x7e0000, 0x10000},
247 {"radio", 0x7f0000, 0x10000},
251 .first_sysupgrade_partition
= "os-image",
252 .last_sysupgrade_partition
= "support-list",
255 /** Firmware layout for the CPE220 V2 */
258 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
261 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
262 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
263 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
264 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
265 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
266 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
267 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
268 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
269 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
270 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
275 {"fs-uboot", 0x00000, 0x20000},
276 {"partition-table", 0x20000, 0x02000},
277 {"default-mac", 0x30000, 0x00020},
278 {"product-info", 0x31100, 0x00100},
279 {"signature", 0x32000, 0x00400},
280 {"os-image", 0x40000, 0x300000},
281 {"file-system", 0x340000, 0x470000},
282 {"soft-version", 0x7b0000, 0x00100},
283 {"support-list", 0x7b1000, 0x00400},
284 {"user-config", 0x7c0000, 0x10000},
285 {"default-config", 0x7d0000, 0x10000},
286 {"log", 0x7e0000, 0x10000},
287 {"radio", 0x7f0000, 0x10000},
291 .first_sysupgrade_partition
= "os-image",
292 .last_sysupgrade_partition
= "support-list",
295 /** Firmware layout for the CPE220 V3 */
298 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
301 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
302 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
303 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
304 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
305 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
306 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
307 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
308 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
309 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
310 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
315 {"fs-uboot", 0x00000, 0x20000},
316 {"partition-table", 0x20000, 0x02000},
317 {"default-mac", 0x30000, 0x00020},
318 {"product-info", 0x31100, 0x00100},
319 {"device-info", 0x31400, 0x00400},
320 {"signature", 0x32000, 0x00400},
321 {"device-id", 0x33000, 0x00100},
322 {"firmware", 0x40000, 0x770000},
323 {"soft-version", 0x7b0000, 0x00100},
324 {"support-list", 0x7b1000, 0x01000},
325 {"user-config", 0x7c0000, 0x10000},
326 {"default-config", 0x7d0000, 0x10000},
327 {"log", 0x7e0000, 0x10000},
328 {"radio", 0x7f0000, 0x10000},
332 .first_sysupgrade_partition
= "os-image",
333 .last_sysupgrade_partition
= "support-list",
336 /** Firmware layout for the CPE510/520 V1 */
339 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
342 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
343 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
344 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
345 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
346 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
347 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
348 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
349 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
354 {"fs-uboot", 0x00000, 0x20000},
355 {"partition-table", 0x20000, 0x02000},
356 {"default-mac", 0x30000, 0x00020},
357 {"product-info", 0x31100, 0x00100},
358 {"signature", 0x32000, 0x00400},
359 {"os-image", 0x40000, 0x300000},
360 {"file-system", 0x340000, 0x470000},
361 {"soft-version", 0x7b0000, 0x00100},
362 {"support-list", 0x7b1000, 0x00400},
363 {"user-config", 0x7c0000, 0x10000},
364 {"default-config", 0x7d0000, 0x10000},
365 {"log", 0x7e0000, 0x10000},
366 {"radio", 0x7f0000, 0x10000},
370 .first_sysupgrade_partition
= "os-image",
371 .last_sysupgrade_partition
= "support-list",
374 /** Firmware layout for the CPE510 V2 */
377 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
380 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
381 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
382 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
383 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
384 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
385 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
386 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
387 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
388 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
389 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
390 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
391 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
396 {"fs-uboot", 0x00000, 0x20000},
397 {"partition-table", 0x20000, 0x02000},
398 {"default-mac", 0x30000, 0x00020},
399 {"product-info", 0x31100, 0x00100},
400 {"signature", 0x32000, 0x00400},
401 {"os-image", 0x40000, 0x300000},
402 {"file-system", 0x340000, 0x470000},
403 {"soft-version", 0x7b0000, 0x00100},
404 {"support-list", 0x7b1000, 0x00400},
405 {"user-config", 0x7c0000, 0x10000},
406 {"default-config", 0x7d0000, 0x10000},
407 {"log", 0x7e0000, 0x10000},
408 {"radio", 0x7f0000, 0x10000},
412 .first_sysupgrade_partition
= "os-image",
413 .last_sysupgrade_partition
= "support-list",
416 /** Firmware layout for the CPE510 V3 */
419 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
422 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
423 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
424 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
425 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
426 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
427 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
428 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
429 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
430 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
431 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
432 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
433 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
434 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
435 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
436 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
441 {"fs-uboot", 0x00000, 0x20000},
442 {"partition-table", 0x20000, 0x02000},
443 {"default-mac", 0x30000, 0x00020},
444 {"product-info", 0x31100, 0x00100},
445 {"signature", 0x32000, 0x00400},
446 {"os-image", 0x40000, 0x300000},
447 {"file-system", 0x340000, 0x470000},
448 {"soft-version", 0x7b0000, 0x00100},
449 {"support-list", 0x7b1000, 0x00400},
450 {"user-config", 0x7c0000, 0x10000},
451 {"default-config", 0x7d0000, 0x10000},
452 {"log", 0x7e0000, 0x10000},
453 {"radio", 0x7f0000, 0x10000},
457 .first_sysupgrade_partition
= "os-image",
458 .last_sysupgrade_partition
= "support-list",
461 /** Firmware layout for the CPE610V1 */
464 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
467 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
468 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
469 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
470 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
471 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
472 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
473 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
474 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
475 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
476 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
481 {"fs-uboot", 0x00000, 0x20000},
482 {"partition-table", 0x20000, 0x02000},
483 {"default-mac", 0x30000, 0x00020},
484 {"product-info", 0x31100, 0x00100},
485 {"signature", 0x32000, 0x00400},
486 {"os-image", 0x40000, 0x300000},
487 {"file-system", 0x340000, 0x470000},
488 {"soft-version", 0x7b0000, 0x00100},
489 {"support-list", 0x7b1000, 0x00400},
490 {"user-config", 0x7c0000, 0x10000},
491 {"default-config", 0x7d0000, 0x10000},
492 {"log", 0x7e0000, 0x10000},
493 {"radio", 0x7f0000, 0x10000},
497 .first_sysupgrade_partition
= "os-image",
498 .last_sysupgrade_partition
= "support-list",
501 /** Firmware layout for the CPE610V2 */
504 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
507 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
508 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
509 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
510 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
511 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
512 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
513 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
514 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
515 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
516 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
521 {"fs-uboot", 0x00000, 0x20000},
522 {"partition-table", 0x20000, 0x02000},
523 {"default-mac", 0x30000, 0x00020},
524 {"product-info", 0x31100, 0x00100},
525 {"signature", 0x32000, 0x00400},
526 {"os-image", 0x40000, 0x300000},
527 {"file-system", 0x340000, 0x470000},
528 {"soft-version", 0x7b0000, 0x00100},
529 {"support-list", 0x7b1000, 0x00400},
530 {"user-config", 0x7c0000, 0x10000},
531 {"default-config", 0x7d0000, 0x10000},
532 {"log", 0x7e0000, 0x10000},
533 {"radio", 0x7f0000, 0x10000},
537 .first_sysupgrade_partition
= "os-image",
538 .last_sysupgrade_partition
= "support-list",
543 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
546 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
547 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
548 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
553 {"fs-uboot", 0x00000, 0x20000},
554 {"partition-table", 0x20000, 0x02000},
555 {"default-mac", 0x30000, 0x00020},
556 {"product-info", 0x31100, 0x00100},
557 {"signature", 0x32000, 0x00400},
558 {"os-image", 0x40000, 0x300000},
559 {"file-system", 0x340000, 0x470000},
560 {"soft-version", 0x7b0000, 0x00100},
561 {"support-list", 0x7b1000, 0x00400},
562 {"user-config", 0x7c0000, 0x10000},
563 {"default-config", 0x7d0000, 0x10000},
564 {"log", 0x7e0000, 0x10000},
565 {"radio", 0x7f0000, 0x10000},
569 .first_sysupgrade_partition
= "os-image",
570 .last_sysupgrade_partition
= "support-list",
575 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
578 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
579 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
580 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
585 {"fs-uboot", 0x00000, 0x20000},
586 {"partition-table", 0x20000, 0x02000},
587 {"default-mac", 0x30000, 0x00020},
588 {"product-info", 0x31100, 0x00100},
589 {"signature", 0x32000, 0x00400},
590 {"os-image", 0x40000, 0x300000},
591 {"file-system", 0x340000, 0x470000},
592 {"soft-version", 0x7b0000, 0x00100},
593 {"support-list", 0x7b1000, 0x00400},
594 {"user-config", 0x7c0000, 0x10000},
595 {"default-config", 0x7d0000, 0x10000},
596 {"log", 0x7e0000, 0x10000},
597 {"radio", 0x7f0000, 0x10000},
601 .first_sysupgrade_partition
= "os-image",
602 .last_sysupgrade_partition
= "support-list",
607 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
610 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
611 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
612 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
613 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
618 {"fs-uboot", 0x00000, 0x20000},
619 {"partition-table", 0x20000, 0x02000},
620 {"default-mac", 0x30000, 0x00020},
621 {"product-info", 0x31100, 0x00100},
622 {"signature", 0x32000, 0x00400},
623 {"os-image", 0x40000, 0x300000},
624 {"file-system", 0x340000, 0x470000},
625 {"soft-version", 0x7b0000, 0x00100},
626 {"support-list", 0x7b1000, 0x00400},
627 {"user-config", 0x7c0000, 0x10000},
628 {"default-config", 0x7d0000, 0x10000},
629 {"log", 0x7e0000, 0x10000},
630 {"radio", 0x7f0000, 0x10000},
634 .first_sysupgrade_partition
= "os-image",
635 .last_sysupgrade_partition
= "support-list",
640 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
643 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
644 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
645 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
646 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
651 {"fs-uboot", 0x00000, 0x20000},
652 {"partition-table", 0x20000, 0x02000},
653 {"default-mac", 0x30000, 0x00020},
654 {"product-info", 0x31100, 0x00100},
655 {"signature", 0x32000, 0x00400},
656 {"os-image", 0x40000, 0x300000},
657 {"file-system", 0x340000, 0x470000},
658 {"soft-version", 0x7b0000, 0x00100},
659 {"support-list", 0x7b1000, 0x00400},
660 {"user-config", 0x7c0000, 0x10000},
661 {"default-config", 0x7d0000, 0x10000},
662 {"log", 0x7e0000, 0x10000},
663 {"radio", 0x7f0000, 0x10000},
667 .first_sysupgrade_partition
= "os-image",
668 .last_sysupgrade_partition
= "support-list",
671 /** Firmware layout for the AD7200 */
677 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
682 {"SBL1", 0x00000, 0x20000},
683 {"MIBIB", 0x20000, 0x20000},
684 {"SBL2", 0x40000, 0x20000},
685 {"SBL3", 0x60000, 0x30000},
686 {"DDRCONFIG", 0x90000, 0x10000},
687 {"SSD", 0xa0000, 0x10000},
688 {"TZ", 0xb0000, 0x30000},
689 {"RPM", 0xe0000, 0x20000},
690 {"fs-uboot", 0x100000, 0x70000},
691 {"uboot-env", 0x170000, 0x40000},
692 {"radio", 0x1b0000, 0x40000},
693 {"os-image", 0x1f0000, 0x400000},
694 {"file-system", 0x5f0000, 0x1900000},
695 {"default-mac", 0x1ef0000, 0x00200},
696 {"pin", 0x1ef0200, 0x00200},
697 {"device-id", 0x1ef0400, 0x00200},
698 {"product-info", 0x1ef0600, 0x0fa00},
699 {"partition-table", 0x1f00000, 0x10000},
700 {"soft-version", 0x1f10000, 0x10000},
701 {"support-list", 0x1f20000, 0x10000},
702 {"profile", 0x1f30000, 0x10000},
703 {"default-config", 0x1f40000, 0x10000},
704 {"user-config", 0x1f50000, 0x40000},
705 {"qos-db", 0x1f90000, 0x40000},
706 {"usb-config", 0x1fd0000, 0x10000},
707 {"log", 0x1fe0000, 0x20000},
711 .first_sysupgrade_partition
= "os-image",
712 .last_sysupgrade_partition
= "file-system"
715 /** Firmware layout for the C2600 */
721 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
726 We use a bigger os-image partition than the stock images (and thus
727 smaller file-system), as our kernel doesn't fit in the stock firmware's
728 2 MB os-image since kernel 4.14.
731 {"SBL1", 0x00000, 0x20000},
732 {"MIBIB", 0x20000, 0x20000},
733 {"SBL2", 0x40000, 0x20000},
734 {"SBL3", 0x60000, 0x30000},
735 {"DDRCONFIG", 0x90000, 0x10000},
736 {"SSD", 0xa0000, 0x10000},
737 {"TZ", 0xb0000, 0x30000},
738 {"RPM", 0xe0000, 0x20000},
739 {"fs-uboot", 0x100000, 0x70000},
740 {"uboot-env", 0x170000, 0x40000},
741 {"radio", 0x1b0000, 0x40000},
742 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
743 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
744 {"default-mac", 0x1ef0000, 0x00200},
745 {"pin", 0x1ef0200, 0x00200},
746 {"product-info", 0x1ef0400, 0x0fc00},
747 {"partition-table", 0x1f00000, 0x10000},
748 {"soft-version", 0x1f10000, 0x10000},
749 {"support-list", 0x1f20000, 0x10000},
750 {"profile", 0x1f30000, 0x10000},
751 {"default-config", 0x1f40000, 0x10000},
752 {"user-config", 0x1f50000, 0x40000},
753 {"qos-db", 0x1f90000, 0x40000},
754 {"usb-config", 0x1fd0000, 0x10000},
755 {"log", 0x1fe0000, 0x20000},
759 .first_sysupgrade_partition
= "os-image",
760 .last_sysupgrade_partition
= "file-system"
763 /** Firmware layout for the A7-V5 */
765 .id
= "ARCHER-A7-V5",
768 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
769 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
770 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
771 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
772 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
773 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
775 .soft_ver
= "soft_ver:1.0.0\n",
777 /* We're using a dynamic kernel/rootfs split here */
779 {"factory-boot", 0x00000, 0x20000},
780 {"fs-uboot", 0x20000, 0x20000},
781 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
782 /* Stock: name file-system base 0x160000 size 0xda0000 */
783 {"default-mac", 0xf40000, 0x00200},
784 {"pin", 0xf40200, 0x00200},
785 {"device-id", 0xf40400, 0x00100},
786 {"product-info", 0xf40500, 0x0fb00},
787 {"soft-version", 0xf50000, 0x00100},
788 {"extra-para", 0xf51000, 0x01000},
789 {"support-list", 0xf52000, 0x0a000},
790 {"profile", 0xf5c000, 0x04000},
791 {"default-config", 0xf60000, 0x10000},
792 {"user-config", 0xf70000, 0x40000},
793 {"certificate", 0xfb0000, 0x10000},
794 {"partition-table", 0xfc0000, 0x10000},
795 {"log", 0xfd0000, 0x20000},
796 {"radio", 0xff0000, 0x10000},
800 .first_sysupgrade_partition
= "os-image",
801 .last_sysupgrade_partition
= "file-system",
804 /** Firmware layout for the C2v3 */
806 .id
= "ARCHER-C2-V3",
809 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
810 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
811 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
813 .soft_ver
= "soft_ver:3.0.1\n",
815 /** We're using a dynamic kernel/rootfs split here */
818 {"factory-boot", 0x00000, 0x20000},
819 {"fs-uboot", 0x20000, 0x10000},
820 {"firmware", 0x30000, 0x7a0000},
821 {"user-config", 0x7d0000, 0x04000},
822 {"default-mac", 0x7e0000, 0x00100},
823 {"device-id", 0x7e0100, 0x00100},
824 {"extra-para", 0x7e0200, 0x00100},
825 {"pin", 0x7e0300, 0x00100},
826 {"support-list", 0x7e0400, 0x00400},
827 {"soft-version", 0x7e0800, 0x00400},
828 {"product-info", 0x7e0c00, 0x01400},
829 {"partition-table", 0x7e2000, 0x01000},
830 {"profile", 0x7e3000, 0x01000},
831 {"default-config", 0x7e4000, 0x04000},
832 {"merge-config", 0x7ec000, 0x02000},
833 {"qos-db", 0x7ee000, 0x02000},
834 {"radio", 0x7f0000, 0x10000},
838 .first_sysupgrade_partition
= "os-image",
839 .last_sysupgrade_partition
= "file-system",
842 /** Firmware layout for the C25v1 */
844 .id
= "ARCHER-C25-V1",
847 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
848 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
849 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
851 .soft_ver
= "soft_ver:1.0.0\n",
853 /* We're using a dynamic kernel/rootfs split here */
855 {"factory-boot", 0x00000, 0x20000},
856 {"fs-uboot", 0x20000, 0x10000},
857 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
858 /* Stock: name file-system base 0x130000 size 0x6a0000 */
859 {"user-config", 0x7d0000, 0x04000},
860 {"default-mac", 0x7e0000, 0x00100},
861 {"device-id", 0x7e0100, 0x00100},
862 {"extra-para", 0x7e0200, 0x00100},
863 {"pin", 0x7e0300, 0x00100},
864 {"support-list", 0x7e0400, 0x00400},
865 {"soft-version", 0x7e0800, 0x00400},
866 {"product-info", 0x7e0c00, 0x01400},
867 {"partition-table", 0x7e2000, 0x01000},
868 {"profile", 0x7e3000, 0x01000},
869 {"default-config", 0x7e4000, 0x04000},
870 {"merge-config", 0x7ec000, 0x02000},
871 {"qos-db", 0x7ee000, 0x02000},
872 {"radio", 0x7f0000, 0x10000},
876 .first_sysupgrade_partition
= "os-image",
877 .last_sysupgrade_partition
= "file-system",
880 /** Firmware layout for the C58v1 */
882 .id
= "ARCHER-C58-V1",
886 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
887 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
888 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
890 .soft_ver
= "soft_ver:1.0.0\n",
893 {"fs-uboot", 0x00000, 0x10000},
894 {"default-mac", 0x10000, 0x00200},
895 {"pin", 0x10200, 0x00200},
896 {"product-info", 0x10400, 0x00100},
897 {"partition-table", 0x10500, 0x00800},
898 {"soft-version", 0x11300, 0x00200},
899 {"support-list", 0x11500, 0x00100},
900 {"device-id", 0x11600, 0x00100},
901 {"profile", 0x11700, 0x03900},
902 {"default-config", 0x15000, 0x04000},
903 {"user-config", 0x19000, 0x04000},
904 {"firmware", 0x20000, 0x7c8000},
905 {"certyficate", 0x7e8000, 0x08000},
906 {"radio", 0x7f0000, 0x10000},
910 .first_sysupgrade_partition
= "os-image",
911 .last_sysupgrade_partition
= "file-system",
914 /** Firmware layout for the C59v1 */
916 .id
= "ARCHER-C59-V1",
920 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
921 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
922 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
923 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
925 .soft_ver
= "soft_ver:1.0.0\n",
927 /* We're using a dynamic kernel/rootfs split here */
929 {"fs-uboot", 0x00000, 0x10000},
930 {"default-mac", 0x10000, 0x00200},
931 {"pin", 0x10200, 0x00200},
932 {"device-id", 0x10400, 0x00100},
933 {"product-info", 0x10500, 0x0fb00},
934 {"firmware", 0x20000, 0xe30000},
935 {"partition-table", 0xe50000, 0x10000},
936 {"soft-version", 0xe60000, 0x10000},
937 {"support-list", 0xe70000, 0x10000},
938 {"profile", 0xe80000, 0x10000},
939 {"default-config", 0xe90000, 0x10000},
940 {"user-config", 0xea0000, 0x40000},
941 {"usb-config", 0xee0000, 0x10000},
942 {"certificate", 0xef0000, 0x10000},
943 {"qos-db", 0xf00000, 0x40000},
944 {"log", 0xfe0000, 0x10000},
945 {"radio", 0xff0000, 0x10000},
949 .first_sysupgrade_partition
= "os-image",
950 .last_sysupgrade_partition
= "file-system",
953 /** Firmware layout for the C59v2 */
955 .id
= "ARCHER-C59-V2",
959 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
960 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
961 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
963 .soft_ver
= "soft_ver:2.0.0 Build 20161206 rel.7303\n",
965 /** We're using a dynamic kernel/rootfs split here */
967 {"factory-boot", 0x00000, 0x20000},
968 {"fs-uboot", 0x20000, 0x10000},
969 {"default-mac", 0x30000, 0x00200},
970 {"pin", 0x30200, 0x00200},
971 {"device-id", 0x30400, 0x00100},
972 {"product-info", 0x30500, 0x0fb00},
973 {"firmware", 0x40000, 0xe10000},
974 {"partition-table", 0xe50000, 0x10000},
975 {"soft-version", 0xe60000, 0x10000},
976 {"support-list", 0xe70000, 0x10000},
977 {"profile", 0xe80000, 0x10000},
978 {"default-config", 0xe90000, 0x10000},
979 {"user-config", 0xea0000, 0x40000},
980 {"usb-config", 0xee0000, 0x10000},
981 {"certificate", 0xef0000, 0x10000},
982 {"extra-para", 0xf00000, 0x10000},
983 {"qos-db", 0xf10000, 0x30000},
984 {"log", 0xfe0000, 0x10000},
985 {"radio", 0xff0000, 0x10000},
989 .first_sysupgrade_partition
= "os-image",
990 .last_sysupgrade_partition
= "file-system",
993 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
995 .id
= "ARCHER-C6-V2",
999 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
1000 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
1001 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
1003 .soft_ver
= "soft_ver:1.9.1\n",
1006 {"fs-uboot", 0x00000, 0x20000},
1007 {"default-mac", 0x20000, 0x00200},
1008 {"pin", 0x20200, 0x00100},
1009 {"product-info", 0x20300, 0x00200},
1010 {"device-id", 0x20500, 0x0fb00},
1011 {"firmware", 0x30000, 0x7a9400},
1012 {"soft-version", 0x7d9400, 0x00100},
1013 {"extra-para", 0x7d9500, 0x00100},
1014 {"support-list", 0x7d9600, 0x00200},
1015 {"profile", 0x7d9800, 0x03000},
1016 {"default-config", 0x7dc800, 0x03000},
1017 {"partition-table", 0x7df800, 0x00800},
1018 {"user-config", 0x7e0000, 0x0c000},
1019 {"certificate", 0x7ec000, 0x04000},
1020 {"radio", 0x7f0000, 0x10000},
1024 .first_sysupgrade_partition
= "os-image",
1025 .last_sysupgrade_partition
= "file-system",
1028 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1030 .id
= "ARCHER-C6-V2-US",
1034 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1035 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1036 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1038 .soft_ver
= "soft_ver:1.9.1\n",
1041 {"factory-boot", 0x00000, 0x20000},
1042 {"default-mac", 0x20000, 0x00200},
1043 {"pin", 0x20200, 0x00100},
1044 {"product-info", 0x20300, 0x00200},
1045 {"device-id", 0x20500, 0x0fb00},
1046 {"fs-uboot", 0x30000, 0x20000},
1047 {"firmware", 0x50000, 0xf89400},
1048 {"soft-version", 0xfd9400, 0x00100},
1049 {"extra-para", 0xfd9500, 0x00100},
1050 {"support-list", 0xfd9600, 0x00200},
1051 {"profile", 0xfd9800, 0x03000},
1052 {"default-config", 0xfdc800, 0x03000},
1053 {"partition-table", 0xfdf800, 0x00800},
1054 {"user-config", 0xfe0000, 0x0c000},
1055 {"certificate", 0xfec000, 0x04000},
1056 {"radio", 0xff0000, 0x10000},
1059 .first_sysupgrade_partition
= "os-image",
1060 .last_sysupgrade_partition
= "file-system",
1062 /** Firmware layout for the Archer A6 v3 */
1064 .id
= "ARCHER-A6-V3",
1068 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1069 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n",
1071 .soft_ver
= "soft_ver:1.0.5\n",
1074 {"fs-uboot", 0x00000, 0x40000},
1075 {"firmware", 0x40000, 0xf60000},
1076 {"default-mac", 0xfa0000, 0x00200},
1077 {"pin", 0xfa0200, 0x00100},
1078 {"device-id", 0xfa0300, 0x00100},
1079 {"product-info", 0xfa0400, 0x0fc00},
1080 {"default-config", 0xfb0000, 0x08000},
1081 {"ap-def-config", 0xfb8000, 0x08000},
1082 {"user-config", 0xfc0000, 0x0a000},
1083 {"ag-config", 0xfca000, 0x04000},
1084 {"certificate", 0xfce000, 0x02000},
1085 {"ap-config", 0xfd0000, 0x06000},
1086 {"router-config", 0xfd6000, 0x06000},
1087 {"favicon", 0xfdc000, 0x02000},
1088 {"logo", 0xfde000, 0x02000},
1089 {"partition-table", 0xfe0000, 0x00800},
1090 {"soft-version", 0xfe0800, 0x00100},
1091 {"support-list", 0xfe0900, 0x00200},
1092 {"profile", 0xfe0b00, 0x03000},
1093 {"extra-para", 0xfe3b00, 0x00100},
1094 {"radio", 0xff0000, 0x10000},
1097 .first_sysupgrade_partition
= "os-image",
1098 .last_sysupgrade_partition
= "file-system",
1100 /** Firmware layout for the C60v1 */
1102 .id
= "ARCHER-C60-V1",
1106 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1107 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1108 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1110 .soft_ver
= "soft_ver:1.0.0\n",
1113 {"fs-uboot", 0x00000, 0x10000},
1114 {"default-mac", 0x10000, 0x00200},
1115 {"pin", 0x10200, 0x00200},
1116 {"product-info", 0x10400, 0x00100},
1117 {"partition-table", 0x10500, 0x00800},
1118 {"soft-version", 0x11300, 0x00200},
1119 {"support-list", 0x11500, 0x00100},
1120 {"device-id", 0x11600, 0x00100},
1121 {"profile", 0x11700, 0x03900},
1122 {"default-config", 0x15000, 0x04000},
1123 {"user-config", 0x19000, 0x04000},
1124 {"firmware", 0x20000, 0x7c8000},
1125 {"certyficate", 0x7e8000, 0x08000},
1126 {"radio", 0x7f0000, 0x10000},
1130 .first_sysupgrade_partition
= "os-image",
1131 .last_sysupgrade_partition
= "file-system",
1134 /** Firmware layout for the C60v2 */
1136 .id
= "ARCHER-C60-V2",
1140 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1141 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1142 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1144 .soft_ver
= "soft_ver:2.0.0\n",
1147 {"factory-boot", 0x00000, 0x1fb00},
1148 {"default-mac", 0x1fb00, 0x00200},
1149 {"pin", 0x1fd00, 0x00100},
1150 {"product-info", 0x1fe00, 0x00100},
1151 {"device-id", 0x1ff00, 0x00100},
1152 {"fs-uboot", 0x20000, 0x10000},
1153 {"firmware", 0x30000, 0x7a0000},
1154 {"soft-version", 0x7d9500, 0x00100},
1155 {"support-list", 0x7d9600, 0x00100},
1156 {"extra-para", 0x7d9700, 0x00100},
1157 {"profile", 0x7d9800, 0x03000},
1158 {"default-config", 0x7dc800, 0x03000},
1159 {"partition-table", 0x7df800, 0x00800},
1160 {"user-config", 0x7e0000, 0x0c000},
1161 {"certificate", 0x7ec000, 0x04000},
1162 {"radio", 0x7f0000, 0x10000},
1166 .first_sysupgrade_partition
= "os-image",
1167 .last_sysupgrade_partition
= "file-system",
1170 /** Firmware layout for the C60v3 */
1172 .id
= "ARCHER-C60-V3",
1176 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1177 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1178 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1180 .soft_ver
= "soft_ver:3.0.0\n",
1183 {"factory-boot", 0x00000, 0x1fb00},
1184 {"default-mac", 0x1fb00, 0x00200},
1185 {"pin", 0x1fd00, 0x00100},
1186 {"product-info", 0x1fe00, 0x00100},
1187 {"device-id", 0x1ff00, 0x00100},
1188 {"fs-uboot", 0x20000, 0x10000},
1189 {"firmware", 0x30000, 0x7a0000},
1190 {"soft-version", 0x7d9500, 0x00100},
1191 {"support-list", 0x7d9600, 0x00100},
1192 {"extra-para", 0x7d9700, 0x00100},
1193 {"profile", 0x7d9800, 0x03000},
1194 {"default-config", 0x7dc800, 0x03000},
1195 {"partition-table", 0x7df800, 0x00800},
1196 {"user-config", 0x7e0000, 0x0c000},
1197 {"certificate", 0x7ec000, 0x04000},
1198 {"radio", 0x7f0000, 0x10000},
1202 .first_sysupgrade_partition
= "os-image",
1203 .last_sysupgrade_partition
= "file-system",
1206 /** Firmware layout for the C5 */
1208 .id
= "ARCHER-C5-V2",
1212 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1213 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1214 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1219 {"fs-uboot", 0x00000, 0x40000},
1220 {"os-image", 0x40000, 0x200000},
1221 {"file-system", 0x240000, 0xc00000},
1222 {"default-mac", 0xe40000, 0x00200},
1223 {"pin", 0xe40200, 0x00200},
1224 {"product-info", 0xe40400, 0x00200},
1225 {"partition-table", 0xe50000, 0x10000},
1226 {"soft-version", 0xe60000, 0x00200},
1227 {"support-list", 0xe61000, 0x0f000},
1228 {"profile", 0xe70000, 0x10000},
1229 {"default-config", 0xe80000, 0x10000},
1230 {"user-config", 0xe90000, 0x50000},
1231 {"log", 0xee0000, 0x100000},
1232 {"radio_bk", 0xfe0000, 0x10000},
1233 {"radio", 0xff0000, 0x10000},
1237 .first_sysupgrade_partition
= "os-image",
1238 .last_sysupgrade_partition
= "file-system"
1241 /** Firmware layout for the C7 */
1243 .id
= "ARCHER-C7-V4",
1246 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1247 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1248 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1249 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1250 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1251 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1252 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1253 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1254 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1255 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1257 .soft_ver
= "soft_ver:1.0.0\n",
1259 /* We're using a dynamic kernel/rootfs split here */
1261 {"factory-boot", 0x00000, 0x20000},
1262 {"fs-uboot", 0x20000, 0x20000},
1263 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1264 /* Stock: name file-system base 0x160000 size 0xda0000 */
1265 {"default-mac", 0xf00000, 0x00200},
1266 {"pin", 0xf00200, 0x00200},
1267 {"device-id", 0xf00400, 0x00100},
1268 {"product-info", 0xf00500, 0x0fb00},
1269 {"soft-version", 0xf10000, 0x00100},
1270 {"extra-para", 0xf11000, 0x01000},
1271 {"support-list", 0xf12000, 0x0a000},
1272 {"profile", 0xf1c000, 0x04000},
1273 {"default-config", 0xf20000, 0x10000},
1274 {"user-config", 0xf30000, 0x40000},
1275 {"qos-db", 0xf70000, 0x40000},
1276 {"certificate", 0xfb0000, 0x10000},
1277 {"partition-table", 0xfc0000, 0x10000},
1278 {"log", 0xfd0000, 0x20000},
1279 {"radio", 0xff0000, 0x10000},
1283 .first_sysupgrade_partition
= "os-image",
1284 .last_sysupgrade_partition
= "file-system",
1287 /** Firmware layout for the C7 v5*/
1289 .id
= "ARCHER-C7-V5",
1292 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1293 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1294 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1295 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1296 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1297 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1298 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1299 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1302 .soft_ver
= "soft_ver:7.0.0\n",
1304 /* We're using a dynamic kernel/rootfs split here */
1306 {"factory-boot", 0x00000, 0x20000},
1307 {"fs-uboot", 0x20000, 0x20000},
1308 {"partition-table", 0x40000, 0x10000},
1309 {"radio", 0x50000, 0x10000},
1310 {"default-mac", 0x60000, 0x00200},
1311 {"pin", 0x60200, 0x00200},
1312 {"device-id", 0x60400, 0x00100},
1313 {"product-info", 0x60500, 0x0fb00},
1314 {"soft-version", 0x70000, 0x01000},
1315 {"extra-para", 0x71000, 0x01000},
1316 {"support-list", 0x72000, 0x0a000},
1317 {"profile", 0x7c000, 0x04000},
1318 {"user-config", 0x80000, 0x40000},
1321 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1322 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1324 {"log", 0xfc0000, 0x20000},
1325 {"certificate", 0xfe0000, 0x10000},
1326 {"default-config", 0xff0000, 0x10000},
1331 .first_sysupgrade_partition
= "os-image",
1332 .last_sysupgrade_partition
= "file-system",
1335 /** Firmware layout for the C9 */
1341 "{product_name:ArcherC9,"
1342 "product_ver:1.0.0,"
1343 "special_id:00000000}\n",
1348 {"fs-uboot", 0x00000, 0x40000},
1349 {"os-image", 0x40000, 0x200000},
1350 {"file-system", 0x240000, 0xc00000},
1351 {"default-mac", 0xe40000, 0x00200},
1352 {"pin", 0xe40200, 0x00200},
1353 {"product-info", 0xe40400, 0x00200},
1354 {"partition-table", 0xe50000, 0x10000},
1355 {"soft-version", 0xe60000, 0x00200},
1356 {"support-list", 0xe61000, 0x0f000},
1357 {"profile", 0xe70000, 0x10000},
1358 {"default-config", 0xe80000, 0x10000},
1359 {"user-config", 0xe90000, 0x50000},
1360 {"log", 0xee0000, 0x100000},
1361 {"radio_bk", 0xfe0000, 0x10000},
1362 {"radio", 0xff0000, 0x10000},
1366 .first_sysupgrade_partition
= "os-image",
1367 .last_sysupgrade_partition
= "file-system"
1370 /** Firmware layout for the EAP120 */
1373 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1376 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1381 {"fs-uboot", 0x00000, 0x20000},
1382 {"partition-table", 0x20000, 0x02000},
1383 {"default-mac", 0x30000, 0x00020},
1384 {"support-list", 0x31000, 0x00100},
1385 {"product-info", 0x31100, 0x00100},
1386 {"soft-version", 0x32000, 0x00100},
1387 {"os-image", 0x40000, 0x180000},
1388 {"file-system", 0x1c0000, 0x600000},
1389 {"user-config", 0x7c0000, 0x10000},
1390 {"backup-config", 0x7d0000, 0x10000},
1391 {"log", 0x7e0000, 0x10000},
1392 {"radio", 0x7f0000, 0x10000},
1396 .first_sysupgrade_partition
= "os-image",
1397 .last_sysupgrade_partition
= "file-system"
1400 /** Firmware layout for the EAP225-Outdoor v1 */
1402 .id
= "EAP225-OUTDOOR-V1",
1405 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1406 .part_trail
= PART_TRAIL_NONE
,
1408 .soft_ver_compat_level
= 1,
1411 {"fs-uboot", 0x00000, 0x20000},
1412 {"partition-table", 0x20000, 0x02000},
1413 {"default-mac", 0x30000, 0x01000},
1414 {"support-list", 0x31000, 0x00100},
1415 {"product-info", 0x31100, 0x00400},
1416 {"soft-version", 0x32000, 0x00100},
1417 {"firmware", 0x40000, 0xd80000},
1418 {"user-config", 0xdc0000, 0x30000},
1419 {"mutil-log", 0xf30000, 0x80000},
1420 {"oops", 0xfb0000, 0x40000},
1421 {"radio", 0xff0000, 0x10000},
1425 .first_sysupgrade_partition
= "os-image",
1426 .last_sysupgrade_partition
= "file-system"
1429 /** Firmware layout for the EAP225 v3 */
1434 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
1435 .part_trail
= PART_TRAIL_NONE
,
1437 .soft_ver_compat_level
= 1,
1440 {"fs-uboot", 0x00000, 0x20000},
1441 {"partition-table", 0x20000, 0x02000},
1442 {"default-mac", 0x30000, 0x01000},
1443 {"support-list", 0x31000, 0x00100},
1444 {"product-info", 0x31100, 0x00400},
1445 {"soft-version", 0x32000, 0x00100},
1446 {"firmware", 0x40000, 0xd80000},
1447 {"user-config", 0xdc0000, 0x30000},
1448 {"mutil-log", 0xf30000, 0x80000},
1449 {"oops", 0xfb0000, 0x40000},
1450 {"radio", 0xff0000, 0x10000},
1454 .first_sysupgrade_partition
= "os-image",
1455 .last_sysupgrade_partition
= "file-system"
1458 /** Firmware layout for the EAP225-Wall v2 */
1460 .id
= "EAP225-WALL-V2",
1463 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1464 .part_trail
= PART_TRAIL_NONE
,
1466 .soft_ver_compat_level
= 1,
1469 {"fs-uboot", 0x00000, 0x20000},
1470 {"partition-table", 0x20000, 0x02000},
1471 {"default-mac", 0x30000, 0x01000},
1472 {"support-list", 0x31000, 0x00100},
1473 {"product-info", 0x31100, 0x00400},
1474 {"soft-version", 0x32000, 0x00100},
1475 {"firmware", 0x40000, 0xd80000},
1476 {"user-config", 0xdc0000, 0x30000},
1477 {"mutil-log", 0xf30000, 0x80000},
1478 {"oops", 0xfb0000, 0x40000},
1479 {"radio", 0xff0000, 0x10000},
1483 .first_sysupgrade_partition
= "os-image",
1484 .last_sysupgrade_partition
= "file-system"
1487 /** Firmware layout for the EAP235-Wall v1 */
1489 .id
= "EAP235-WALL-V1",
1492 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
1493 .part_trail
= PART_TRAIL_NONE
,
1495 .soft_ver_compat_level
= 1,
1498 {"fs-uboot", 0x00000, 0x80000},
1499 {"partition-table", 0x80000, 0x02000},
1500 {"default-mac", 0x90000, 0x01000},
1501 {"support-list", 0x91000, 0x00100},
1502 {"product-info", 0x91100, 0x00400},
1503 {"soft-version", 0x92000, 0x00100},
1504 {"firmware", 0xa0000, 0xd20000},
1505 {"user-config", 0xdc0000, 0x30000},
1506 {"mutil-log", 0xf30000, 0x80000},
1507 {"oops", 0xfb0000, 0x40000},
1508 {"radio", 0xff0000, 0x10000},
1512 .first_sysupgrade_partition
= "os-image",
1513 .last_sysupgrade_partition
= "file-system"
1516 /** Firmware layout for the EAP245 v1 */
1521 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1522 .part_trail
= PART_TRAIL_NONE
,
1526 {"fs-uboot", 0x00000, 0x20000},
1527 {"partition-table", 0x20000, 0x02000},
1528 {"default-mac", 0x30000, 0x01000},
1529 {"support-list", 0x31000, 0x00100},
1530 {"product-info", 0x31100, 0x00400},
1531 {"soft-version", 0x32000, 0x00100},
1532 {"firmware", 0x40000, 0xd80000},
1533 {"user-config", 0xdc0000, 0x30000},
1534 {"radio", 0xff0000, 0x10000},
1538 .first_sysupgrade_partition
= "os-image",
1539 .last_sysupgrade_partition
= "file-system"
1542 /** Firmware layout for the EAP245 v3 */
1547 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
1548 .part_trail
= PART_TRAIL_NONE
,
1550 .soft_ver_compat_level
= 1,
1552 /** Firmware partition with dynamic kernel/rootfs split */
1554 {"factroy-boot", 0x00000, 0x40000},
1555 {"fs-uboot", 0x40000, 0x40000},
1556 {"partition-table", 0x80000, 0x10000},
1557 {"default-mac", 0x90000, 0x01000},
1558 {"support-list", 0x91000, 0x00100},
1559 {"product-info", 0x91100, 0x00400},
1560 {"soft-version", 0x92000, 0x00100},
1561 {"radio", 0xa0000, 0x10000},
1562 {"extra-para", 0xb0000, 0x10000},
1563 {"firmware", 0xc0000, 0xe40000},
1564 {"config", 0xf00000, 0x30000},
1565 {"mutil-log", 0xf30000, 0x80000},
1566 {"oops", 0xfb0000, 0x40000},
1570 .first_sysupgrade_partition
= "os-image",
1571 .last_sysupgrade_partition
= "file-system"
1574 /** Firmware layout for the TL-WA850RE v2 */
1576 .id
= "TLWA850REV2",
1580 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
1581 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
1582 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
1583 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
1584 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
1585 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
1586 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
1587 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
1588 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
1589 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
1594 576KB were moved from file-system to os-image
1595 in comparison to the stock image
1598 {"fs-uboot", 0x00000, 0x20000},
1599 {"firmware", 0x20000, 0x390000},
1600 {"partition-table", 0x3b0000, 0x02000},
1601 {"default-mac", 0x3c0000, 0x00020},
1602 {"pin", 0x3c0100, 0x00020},
1603 {"product-info", 0x3c1000, 0x01000},
1604 {"soft-version", 0x3c2000, 0x00100},
1605 {"support-list", 0x3c3000, 0x01000},
1606 {"profile", 0x3c4000, 0x08000},
1607 {"user-config", 0x3d0000, 0x10000},
1608 {"default-config", 0x3e0000, 0x10000},
1609 {"radio", 0x3f0000, 0x10000},
1613 .first_sysupgrade_partition
= "os-image",
1614 .last_sysupgrade_partition
= "file-system"
1617 /** Firmware layout for the TL-WA855RE v1 */
1619 .id
= "TLWA855REV1",
1623 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
1624 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
1625 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
1626 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
1627 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
1628 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
1629 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
1630 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
1631 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
1636 {"fs-uboot", 0x00000, 0x20000},
1637 {"os-image", 0x20000, 0x150000},
1638 {"file-system", 0x170000, 0x240000},
1639 {"partition-table", 0x3b0000, 0x02000},
1640 {"default-mac", 0x3c0000, 0x00020},
1641 {"pin", 0x3c0100, 0x00020},
1642 {"product-info", 0x3c1000, 0x01000},
1643 {"soft-version", 0x3c2000, 0x00100},
1644 {"support-list", 0x3c3000, 0x01000},
1645 {"profile", 0x3c4000, 0x08000},
1646 {"user-config", 0x3d0000, 0x10000},
1647 {"default-config", 0x3e0000, 0x10000},
1648 {"radio", 0x3f0000, 0x10000},
1652 .first_sysupgrade_partition
= "os-image",
1653 .last_sysupgrade_partition
= "file-system"
1656 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
1658 .id
= "TL-WPA8630P-V2.0-EU",
1662 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
1667 {"factory-uboot", 0x00000, 0x20000},
1668 {"fs-uboot", 0x20000, 0x20000},
1669 {"firmware", 0x40000, 0x5e0000},
1670 {"partition-table", 0x620000, 0x02000},
1671 {"default-mac", 0x630000, 0x00020},
1672 {"pin", 0x630100, 0x00020},
1673 {"device-id", 0x630200, 0x00030},
1674 {"product-info", 0x631100, 0x01000},
1675 {"extra-para", 0x632100, 0x01000},
1676 {"soft-version", 0x640000, 0x01000},
1677 {"support-list", 0x641000, 0x01000},
1678 {"profile", 0x642000, 0x08000},
1679 {"user-config", 0x650000, 0x10000},
1680 {"default-config", 0x660000, 0x10000},
1681 {"default-nvm", 0x670000, 0xc0000},
1682 {"default-pib", 0x730000, 0x40000},
1683 {"radio", 0x7f0000, 0x10000},
1687 .first_sysupgrade_partition
= "os-image",
1688 .last_sysupgrade_partition
= "file-system"
1691 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
1693 .id
= "TL-WPA8630P-V2-INT",
1697 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
1698 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
1699 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
1704 {"factory-uboot", 0x00000, 0x20000},
1705 {"fs-uboot", 0x20000, 0x20000},
1706 {"firmware", 0x40000, 0x5e0000},
1707 {"partition-table", 0x620000, 0x02000},
1708 {"extra-para", 0x632100, 0x01000},
1709 {"soft-version", 0x640000, 0x01000},
1710 {"support-list", 0x641000, 0x01000},
1711 {"profile", 0x642000, 0x08000},
1712 {"user-config", 0x650000, 0x10000},
1713 {"default-config", 0x660000, 0x10000},
1714 {"default-nvm", 0x670000, 0xc0000},
1715 {"default-pib", 0x730000, 0x40000},
1716 {"default-mac", 0x7e0000, 0x00020},
1717 {"pin", 0x7e0100, 0x00020},
1718 {"device-id", 0x7e0200, 0x00030},
1719 {"product-info", 0x7e1100, 0x01000},
1720 {"radio", 0x7f0000, 0x10000},
1724 .first_sysupgrade_partition
= "os-image",
1725 .last_sysupgrade_partition
= "file-system"
1728 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
1730 .id
= "TL-WPA8630P-V2.1-EU",
1734 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
1739 {"factory-uboot", 0x00000, 0x20000},
1740 {"fs-uboot", 0x20000, 0x20000},
1741 {"firmware", 0x40000, 0x5e0000},
1742 {"extra-para", 0x680000, 0x01000},
1743 {"product-info", 0x690000, 0x01000},
1744 {"partition-table", 0x6a0000, 0x02000},
1745 {"soft-version", 0x6b0000, 0x01000},
1746 {"support-list", 0x6b1000, 0x01000},
1747 {"profile", 0x6b2000, 0x08000},
1748 {"user-config", 0x6c0000, 0x10000},
1749 {"default-config", 0x6d0000, 0x10000},
1750 {"default-nvm", 0x6e0000, 0xc0000},
1751 {"default-pib", 0x7a0000, 0x40000},
1752 {"default-mac", 0x7e0000, 0x00020},
1753 {"pin", 0x7e0100, 0x00020},
1754 {"device-id", 0x7e0200, 0x00030},
1755 {"radio", 0x7f0000, 0x10000},
1759 .first_sysupgrade_partition
= "os-image",
1760 .last_sysupgrade_partition
= "file-system"
1763 /** Firmware layout for the TL-WR1043 v5 */
1765 .id
= "TLWR1043NV5",
1769 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
1770 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
1772 .soft_ver
= "soft_ver:1.0.0\n",
1774 {"factory-boot", 0x00000, 0x20000},
1775 {"fs-uboot", 0x20000, 0x20000},
1776 {"firmware", 0x40000, 0xec0000},
1777 {"default-mac", 0xf00000, 0x00200},
1778 {"pin", 0xf00200, 0x00200},
1779 {"device-id", 0xf00400, 0x00100},
1780 {"product-info", 0xf00500, 0x0fb00},
1781 {"soft-version", 0xf10000, 0x01000},
1782 {"extra-para", 0xf11000, 0x01000},
1783 {"support-list", 0xf12000, 0x0a000},
1784 {"profile", 0xf1c000, 0x04000},
1785 {"default-config", 0xf20000, 0x10000},
1786 {"user-config", 0xf30000, 0x40000},
1787 {"qos-db", 0xf70000, 0x40000},
1788 {"certificate", 0xfb0000, 0x10000},
1789 {"partition-table", 0xfc0000, 0x10000},
1790 {"log", 0xfd0000, 0x20000},
1791 {"radio", 0xff0000, 0x10000},
1794 .first_sysupgrade_partition
= "os-image",
1795 .last_sysupgrade_partition
= "file-system"
1798 /** Firmware layout for the TL-WR1043 v4 */
1800 .id
= "TLWR1043NDV4",
1804 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
1808 /* We're using a dynamic kernel/rootfs split here */
1810 {"fs-uboot", 0x00000, 0x20000},
1811 {"firmware", 0x20000, 0xf30000},
1812 {"default-mac", 0xf50000, 0x00200},
1813 {"pin", 0xf50200, 0x00200},
1814 {"product-info", 0xf50400, 0x0fc00},
1815 {"soft-version", 0xf60000, 0x0b000},
1816 {"support-list", 0xf6b000, 0x04000},
1817 {"profile", 0xf70000, 0x04000},
1818 {"default-config", 0xf74000, 0x0b000},
1819 {"user-config", 0xf80000, 0x40000},
1820 {"partition-table", 0xfc0000, 0x10000},
1821 {"log", 0xfd0000, 0x20000},
1822 {"radio", 0xff0000, 0x10000},
1826 .first_sysupgrade_partition
= "os-image",
1827 .last_sysupgrade_partition
= "file-system"
1830 /** Firmware layout for the TL-WR902AC v1 */
1832 .id
= "TL-WR902AC-V1",
1836 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
1837 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
1842 384KB were moved from file-system to os-image
1843 in comparison to the stock image
1846 {"fs-uboot", 0x00000, 0x20000},
1847 {"firmware", 0x20000, 0x730000},
1848 {"default-mac", 0x750000, 0x00200},
1849 {"pin", 0x750200, 0x00200},
1850 {"product-info", 0x750400, 0x0fc00},
1851 {"soft-version", 0x760000, 0x0b000},
1852 {"support-list", 0x76b000, 0x04000},
1853 {"profile", 0x770000, 0x04000},
1854 {"default-config", 0x774000, 0x0b000},
1855 {"user-config", 0x780000, 0x40000},
1856 {"partition-table", 0x7c0000, 0x10000},
1857 {"log", 0x7d0000, 0x20000},
1858 {"radio", 0x7f0000, 0x10000},
1862 .first_sysupgrade_partition
= "os-image",
1863 .last_sysupgrade_partition
= "file-system",
1866 /** Firmware layout for the TL-WR942N V1 */
1872 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
1873 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
1878 {"fs-uboot", 0x00000, 0x20000},
1879 {"firmware", 0x20000, 0xe20000},
1880 {"default-mac", 0xe40000, 0x00200},
1881 {"pin", 0xe40200, 0x00200},
1882 {"product-info", 0xe40400, 0x0fc00},
1883 {"partition-table", 0xe50000, 0x10000},
1884 {"soft-version", 0xe60000, 0x10000},
1885 {"support-list", 0xe70000, 0x10000},
1886 {"profile", 0xe80000, 0x10000},
1887 {"default-config", 0xe90000, 0x10000},
1888 {"user-config", 0xea0000, 0x40000},
1889 {"qos-db", 0xee0000, 0x40000},
1890 {"certificate", 0xf20000, 0x10000},
1891 {"usb-config", 0xfb0000, 0x10000},
1892 {"log", 0xfc0000, 0x20000},
1893 {"radio-bk", 0xfe0000, 0x10000},
1894 {"radio", 0xff0000, 0x10000},
1898 .first_sysupgrade_partition
= "os-image",
1899 .last_sysupgrade_partition
= "file-system",
1902 /** Firmware layout for the RE200 v2 */
1908 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
1909 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
1910 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
1911 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
1912 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
1913 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
1914 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
1915 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
1916 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
1917 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
1918 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
1919 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
1920 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
1925 {"fs-uboot", 0x00000, 0x20000},
1926 {"firmware", 0x20000, 0x7a0000},
1927 {"partition-table", 0x7c0000, 0x02000},
1928 {"default-mac", 0x7c2000, 0x00020},
1929 {"pin", 0x7c2100, 0x00020},
1930 {"product-info", 0x7c3100, 0x01000},
1931 {"soft-version", 0x7c4200, 0x01000},
1932 {"support-list", 0x7c5200, 0x01000},
1933 {"profile", 0x7c6200, 0x08000},
1934 {"config-info", 0x7ce200, 0x00400},
1935 {"user-config", 0x7d0000, 0x10000},
1936 {"default-config", 0x7e0000, 0x10000},
1937 {"radio", 0x7f0000, 0x10000},
1941 .first_sysupgrade_partition
= "os-image",
1942 .last_sysupgrade_partition
= "file-system"
1945 /** Firmware layout for the RE200 v3 */
1951 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
1952 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
1953 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
1954 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
1955 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
1956 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
1957 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
1958 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
1959 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
1960 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
1961 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
1962 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
1963 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
1964 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
1969 {"fs-uboot", 0x00000, 0x20000},
1970 {"firmware", 0x20000, 0x7a0000},
1971 {"partition-table", 0x7c0000, 0x02000},
1972 {"default-mac", 0x7c2000, 0x00020},
1973 {"pin", 0x7c2100, 0x00020},
1974 {"product-info", 0x7c3100, 0x01000},
1975 {"soft-version", 0x7c4200, 0x01000},
1976 {"support-list", 0x7c5200, 0x01000},
1977 {"profile", 0x7c6200, 0x08000},
1978 {"config-info", 0x7ce200, 0x00400},
1979 {"user-config", 0x7d0000, 0x10000},
1980 {"default-config", 0x7e0000, 0x10000},
1981 {"radio", 0x7f0000, 0x10000},
1985 .first_sysupgrade_partition
= "os-image",
1986 .last_sysupgrade_partition
= "file-system"
1989 /** Firmware layout for the RE200 v4 */
1995 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
1996 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
1997 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
1998 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
1999 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2000 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2001 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2002 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2003 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2004 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2005 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2006 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2007 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2008 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2010 .soft_ver
= "soft_ver:1.1.0\n",
2013 {"fs-uboot", 0x00000, 0x20000},
2014 {"firmware", 0x20000, 0x7a0000},
2015 {"partition-table", 0x7c0000, 0x02000},
2016 {"default-mac", 0x7c2000, 0x00020},
2017 {"pin", 0x7c2100, 0x00020},
2018 {"product-info", 0x7c3100, 0x01000},
2019 {"soft-version", 0x7c4200, 0x01000},
2020 {"support-list", 0x7c5200, 0x01000},
2021 {"profile", 0x7c6200, 0x08000},
2022 {"config-info", 0x7ce200, 0x00400},
2023 {"user-config", 0x7d0000, 0x10000},
2024 {"default-config", 0x7e0000, 0x10000},
2025 {"radio", 0x7f0000, 0x10000},
2029 .first_sysupgrade_partition
= "os-image",
2030 .last_sysupgrade_partition
= "file-system"
2033 /** Firmware layout for the RE220 v2 */
2039 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2040 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2041 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2042 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2043 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2044 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2045 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2046 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2047 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2048 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2049 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2050 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2051 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2056 {"fs-uboot", 0x00000, 0x20000},
2057 {"firmware", 0x20000, 0x7a0000},
2058 {"partition-table", 0x7c0000, 0x02000},
2059 {"default-mac", 0x7c2000, 0x00020},
2060 {"pin", 0x7c2100, 0x00020},
2061 {"product-info", 0x7c3100, 0x01000},
2062 {"soft-version", 0x7c4200, 0x01000},
2063 {"support-list", 0x7c5200, 0x01000},
2064 {"profile", 0x7c6200, 0x08000},
2065 {"config-info", 0x7ce200, 0x00400},
2066 {"user-config", 0x7d0000, 0x10000},
2067 {"default-config", 0x7e0000, 0x10000},
2068 {"radio", 0x7f0000, 0x10000},
2072 .first_sysupgrade_partition
= "os-image",
2073 .last_sysupgrade_partition
= "file-system"
2076 /** Firmware layout for the RE305 v1 */
2082 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2083 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2084 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2085 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2086 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2087 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2088 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2093 {"fs-uboot", 0x00000, 0x20000},
2094 {"firmware", 0x20000, 0x5e0000},
2095 {"partition-table", 0x600000, 0x02000},
2096 {"default-mac", 0x610000, 0x00020},
2097 {"pin", 0x610100, 0x00020},
2098 {"product-info", 0x611100, 0x01000},
2099 {"soft-version", 0x620000, 0x01000},
2100 {"support-list", 0x621000, 0x01000},
2101 {"profile", 0x622000, 0x08000},
2102 {"user-config", 0x630000, 0x10000},
2103 {"default-config", 0x640000, 0x10000},
2104 {"radio", 0x7f0000, 0x10000},
2108 .first_sysupgrade_partition
= "os-image",
2109 .last_sysupgrade_partition
= "file-system"
2112 /** Firmware layout for the RE350 v1 */
2118 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2119 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2120 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2121 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2122 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2123 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2124 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2128 /** We're using a dynamic kernel/rootfs split here */
2130 {"fs-uboot", 0x00000, 0x20000},
2131 {"firmware", 0x20000, 0x5e0000},
2132 {"partition-table", 0x600000, 0x02000},
2133 {"default-mac", 0x610000, 0x00020},
2134 {"pin", 0x610100, 0x00020},
2135 {"product-info", 0x611100, 0x01000},
2136 {"soft-version", 0x620000, 0x01000},
2137 {"support-list", 0x621000, 0x01000},
2138 {"profile", 0x622000, 0x08000},
2139 {"user-config", 0x630000, 0x10000},
2140 {"default-config", 0x640000, 0x10000},
2141 {"radio", 0x7f0000, 0x10000},
2145 .first_sysupgrade_partition
= "os-image",
2146 .last_sysupgrade_partition
= "file-system"
2149 /** Firmware layout for the RE350K v1 */
2155 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2159 /** We're using a dynamic kernel/rootfs split here */
2161 {"fs-uboot", 0x00000, 0x20000},
2162 {"firmware", 0x20000, 0xd70000},
2163 {"partition-table", 0xd90000, 0x02000},
2164 {"default-mac", 0xda0000, 0x00020},
2165 {"pin", 0xda0100, 0x00020},
2166 {"product-info", 0xda1100, 0x01000},
2167 {"soft-version", 0xdb0000, 0x01000},
2168 {"support-list", 0xdb1000, 0x01000},
2169 {"profile", 0xdb2000, 0x08000},
2170 {"user-config", 0xdc0000, 0x10000},
2171 {"default-config", 0xdd0000, 0x10000},
2172 {"device-id", 0xde0000, 0x00108},
2173 {"radio", 0xff0000, 0x10000},
2177 .first_sysupgrade_partition
= "os-image",
2178 .last_sysupgrade_partition
= "file-system"
2181 /** Firmware layout for the RE355 */
2187 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2188 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2189 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2190 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2191 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2192 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2193 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2194 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2198 /* We're using a dynamic kernel/rootfs split here */
2200 {"fs-uboot", 0x00000, 0x20000},
2201 {"firmware", 0x20000, 0x5e0000},
2202 {"partition-table", 0x600000, 0x02000},
2203 {"default-mac", 0x610000, 0x00020},
2204 {"pin", 0x610100, 0x00020},
2205 {"product-info", 0x611100, 0x01000},
2206 {"soft-version", 0x620000, 0x01000},
2207 {"support-list", 0x621000, 0x01000},
2208 {"profile", 0x622000, 0x08000},
2209 {"user-config", 0x630000, 0x10000},
2210 {"default-config", 0x640000, 0x10000},
2211 {"radio", 0x7f0000, 0x10000},
2215 .first_sysupgrade_partition
= "os-image",
2216 .last_sysupgrade_partition
= "file-system"
2219 /** Firmware layout for the RE450 */
2225 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2226 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2227 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2228 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2229 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2230 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2231 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2232 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2236 /** We're using a dynamic kernel/rootfs split here */
2238 {"fs-uboot", 0x00000, 0x20000},
2239 {"firmware", 0x20000, 0x5e0000},
2240 {"partition-table", 0x600000, 0x02000},
2241 {"default-mac", 0x610000, 0x00020},
2242 {"pin", 0x610100, 0x00020},
2243 {"product-info", 0x611100, 0x01000},
2244 {"soft-version", 0x620000, 0x01000},
2245 {"support-list", 0x621000, 0x01000},
2246 {"profile", 0x622000, 0x08000},
2247 {"user-config", 0x630000, 0x10000},
2248 {"default-config", 0x640000, 0x10000},
2249 {"radio", 0x7f0000, 0x10000},
2253 .first_sysupgrade_partition
= "os-image",
2254 .last_sysupgrade_partition
= "file-system"
2257 /** Firmware layout for the RE450 v2 */
2263 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2264 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2265 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2266 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2267 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2268 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2269 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2270 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2271 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2275 /* We're using a dynamic kernel/rootfs split here */
2277 {"fs-uboot", 0x00000, 0x20000},
2278 {"firmware", 0x20000, 0x5e0000},
2279 {"partition-table", 0x600000, 0x02000},
2280 {"default-mac", 0x610000, 0x00020},
2281 {"pin", 0x610100, 0x00020},
2282 {"product-info", 0x611100, 0x01000},
2283 {"soft-version", 0x620000, 0x01000},
2284 {"support-list", 0x621000, 0x01000},
2285 {"profile", 0x622000, 0x08000},
2286 {"user-config", 0x630000, 0x10000},
2287 {"default-config", 0x640000, 0x10000},
2288 {"radio", 0x7f0000, 0x10000},
2292 .first_sysupgrade_partition
= "os-image",
2293 .last_sysupgrade_partition
= "file-system"
2296 /** Firmware layout for the RE450 v3 */
2302 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2303 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2304 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2305 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2306 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2307 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2308 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2309 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2310 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2314 /* We're using a dynamic kernel/rootfs split here */
2316 {"fs-uboot", 0x00000, 0x20000},
2317 {"default-mac", 0x20000, 0x00020},
2318 {"pin", 0x20020, 0x00020},
2319 {"product-info", 0x21000, 0x01000},
2320 {"partition-table", 0x22000, 0x02000},
2321 {"soft-version", 0x24000, 0x01000},
2322 {"support-list", 0x25000, 0x01000},
2323 {"profile", 0x26000, 0x08000},
2324 {"user-config", 0x2e000, 0x10000},
2325 {"default-config", 0x3e000, 0x10000},
2326 {"config-info", 0x4e000, 0x00400},
2327 {"firmware", 0x50000, 0x7a0000},
2328 {"radio", 0x7f0000, 0x10000},
2332 .first_sysupgrade_partition
= "os-image",
2333 .last_sysupgrade_partition
= "file-system"
2336 /** Firmware layout for the RE500 */
2342 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
2343 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
2344 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
2345 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
2346 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
2347 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
2348 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
2352 /* We're using a dynamic kernel/rootfs split here */
2354 {"fs-uboot", 0x00000, 0x20000},
2355 {"firmware", 0x20000, 0xde0000},
2356 {"partition-table", 0xe00000, 0x02000},
2357 {"default-mac", 0xe10000, 0x00020},
2358 {"pin", 0xe10100, 0x00020},
2359 {"product-info", 0xe11100, 0x01000},
2360 {"soft-version", 0xe20000, 0x01000},
2361 {"support-list", 0xe21000, 0x01000},
2362 {"profile", 0xe22000, 0x08000},
2363 {"user-config", 0xe30000, 0x10000},
2364 {"default-config", 0xe40000, 0x10000},
2365 {"radio", 0xff0000, 0x10000},
2369 .first_sysupgrade_partition
= "os-image",
2370 .last_sysupgrade_partition
= "file-system"
2373 /** Firmware layout for the RE650 */
2379 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
2380 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
2381 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
2382 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
2383 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
2384 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
2385 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
2389 /* We're using a dynamic kernel/rootfs split here */
2391 {"fs-uboot", 0x00000, 0x20000},
2392 {"firmware", 0x20000, 0xde0000},
2393 {"partition-table", 0xe00000, 0x02000},
2394 {"default-mac", 0xe10000, 0x00020},
2395 {"pin", 0xe10100, 0x00020},
2396 {"product-info", 0xe11100, 0x01000},
2397 {"soft-version", 0xe20000, 0x01000},
2398 {"support-list", 0xe21000, 0x01000},
2399 {"profile", 0xe22000, 0x08000},
2400 {"user-config", 0xe30000, 0x10000},
2401 {"default-config", 0xe40000, 0x10000},
2402 {"radio", 0xff0000, 0x10000},
2406 .first_sysupgrade_partition
= "os-image",
2407 .last_sysupgrade_partition
= "file-system"
2413 #define error(_ret, _errno, _str, ...) \
2415 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
2416 strerror(_errno)); \
2422 /** Stores a uint32 as big endian */
2423 static inline void put32(uint8_t *buf
, uint32_t val
) {
2430 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
2432 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
2435 /** Allocate a padded meta partition with a correctly initialised header
2436 * If the `data` pointer is NULL, then the required space is only allocated,
2437 * otherwise `data_len` bytes will be copied from `data` into the partition
2439 static struct image_partition_entry
init_meta_partition_entry(
2440 const char *name
, const void *data
, uint32_t data_len
,
2441 enum partition_trail_value pad_value
)
2443 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
2444 if (meta_partition_should_pad(pad_value
))
2447 struct image_partition_entry entry
= {
2450 .data
= malloc(total_len
)
2453 error(1, errno
, "failed to allocate meta partition entry");
2455 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
2456 header
->length
= htonl(data_len
);
2460 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
2462 if (meta_partition_should_pad(pad_value
))
2463 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
2468 /** Allocates a new image partition */
2469 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
2470 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
2472 error(1, errno
, "malloc");
2477 /** Frees an image partition */
2478 static void free_image_partition(struct image_partition_entry entry
) {
2482 static time_t source_date_epoch
= -1;
2483 static void set_source_date_epoch() {
2484 char *env
= getenv("SOURCE_DATE_EPOCH");
2488 source_date_epoch
= strtoull(env
, &endptr
, 10);
2489 if (errno
|| (endptr
&& *endptr
!= '\0')) {
2490 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
2496 /** Generates the partition-table partition */
2497 static struct image_partition_entry
make_partition_table(const struct flash_partition_entry
*p
) {
2498 struct image_partition_entry entry
= alloc_image_partition("partition-table", 0x800);
2500 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
2508 for (i
= 0; p
[i
].name
; i
++) {
2510 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n", p
[i
].name
, p
[i
].base
, p
[i
].size
);
2513 error(1, 0, "flash partition table overflow?");
2520 memset(s
, 0xff, end
-s
);
2526 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
2527 static inline uint8_t bcd(uint8_t v
) {
2528 return 0x10 * (v
/10) + v
%10;
2532 /** Generates the soft-version partition */
2533 static struct image_partition_entry
make_soft_version(
2534 const struct device_info
*info
, uint32_t rev
)
2536 /** If an info string is provided, use this instead of
2537 * the structured data, and include the null-termination */
2538 if (info
->soft_ver
) {
2539 uint32_t len
= strlen(info
->soft_ver
) + 1;
2540 return init_meta_partition_entry("soft-version",
2541 info
->soft_ver
, len
, info
->part_trail
);
2546 if (source_date_epoch
!= -1)
2547 t
= source_date_epoch
;
2548 else if (time(&t
) == (time_t)(-1))
2549 error(1, errno
, "time");
2551 struct tm
*tm
= gmtime(&t
);
2553 struct soft_version s
= {
2560 .year_hi
= bcd((1900+tm
->tm_year
)/100),
2561 .year_lo
= bcd(tm
->tm_year
%100),
2562 .month
= bcd(tm
->tm_mon
+1),
2563 .day
= bcd(tm
->tm_mday
),
2565 .compat_level
= htonl(info
->soft_ver_compat_level
)
2568 if (info
->soft_ver_compat_level
== 0)
2569 return init_meta_partition_entry("soft-version", &s
,
2570 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
2573 return init_meta_partition_entry("soft-version", &s
,
2574 sizeof(s
), info
->part_trail
);
2577 /** Generates the support-list partition */
2578 static struct image_partition_entry
make_support_list(
2579 const struct device_info
*info
)
2581 uint32_t len
= strlen(info
->support_list
);
2582 return init_meta_partition_entry("support-list", info
->support_list
,
2583 len
, info
->part_trail
);
2586 /** Partition with extra-para data */
2587 static struct image_partition_entry
make_extra_para(
2588 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
2590 return init_meta_partition_entry("extra-para", extra_para
, len
,
2594 /** Creates a new image partition with an arbitrary name from a file */
2595 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
2596 struct stat statbuf
;
2598 if (stat(filename
, &statbuf
) < 0)
2599 error(1, errno
, "unable to stat file `%s'", filename
);
2601 size_t len
= statbuf
.st_size
;
2603 if (add_jffs2_eof
) {
2604 if (file_system_partition
)
2605 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
2607 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
2610 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
2612 FILE *file
= fopen(filename
, "rb");
2614 error(1, errno
, "unable to open file `%s'", filename
);
2616 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
2617 error(1, errno
, "unable to read file `%s'", filename
);
2619 if (add_jffs2_eof
) {
2620 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
2622 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
2623 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
2632 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
2634 Example image partition table:
2636 fwup-ptn partition-table base 0x00800 size 0x00800
2637 fwup-ptn os-image base 0x01000 size 0x113b45
2638 fwup-ptn file-system base 0x114b45 size 0x1d0004
2639 fwup-ptn support-list base 0x2e4b49 size 0x000d1
2641 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
2642 the end of the partition table is marked with a zero byte.
2644 The firmware image must contain at least the partition-table and support-list partitions
2645 to be accepted. There aren't any alignment constraints for the image partitions.
2647 The partition-table partition contains the actual flash layout; partitions
2648 from the image partition table are mapped to the corresponding flash partitions during
2649 the firmware upgrade. The support-list partition contains a list of devices supported by
2652 The base offsets in the firmware partition table are relative to the end
2653 of the vendor information block, so the partition-table partition will
2654 actually start at offset 0x1814 of the image.
2656 I think partition-table must be the first partition in the firmware image.
2658 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
2660 char *image_pt
= (char *)buffer
, *end
= image_pt
+ 0x800;
2662 size_t base
= 0x800;
2663 for (i
= 0; parts
[i
].name
; i
++) {
2664 for (j
= 0; flash_parts
[j
].name
; j
++) {
2665 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
2666 if (parts
[i
].size
> flash_parts
[j
].size
)
2667 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
2672 assert(flash_parts
[j
].name
);
2674 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
2676 size_t len
= end
-image_pt
;
2677 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
2680 error(1, 0, "image partition table overflow?");
2684 base
+= parts
[i
].size
;
2688 /** Generates and writes the image MD5 checksum */
2689 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
2693 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
2694 MD5_Update(&ctx
, buffer
, len
);
2695 MD5_Final(md5
, &ctx
);
2700 Generates the firmware image in factory format
2706 0000-0003 Image size (4 bytes, big endian)
2707 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
2708 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
2709 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
2710 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
2711 1014-1813 Image partition table (2048 bytes, padded with 0xff)
2712 1814-xxxx Firmware partitions
2714 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
2718 for (i
= 0; parts
[i
].name
; i
++)
2719 *len
+= parts
[i
].size
;
2721 uint8_t *image
= malloc(*len
);
2723 error(1, errno
, "malloc");
2725 memset(image
, 0xff, *len
);
2729 size_t vendor_len
= strlen(info
->vendor
);
2730 put32(image
+0x14, vendor_len
);
2731 memcpy(image
+0x18, info
->vendor
, vendor_len
);
2734 put_partitions(image
+ 0x1014, info
->partitions
, parts
);
2735 put_md5(image
+0x04, image
+0x14, *len
-0x14);
2741 Generates the firmware image in sysupgrade format
2743 This makes some assumptions about the provided flash and image partition tables and
2744 should be generalized when TP-LINK starts building its safeloader into hardware with
2745 different flash layouts.
2747 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
2749 size_t flash_first_partition_index
= 0;
2750 size_t flash_last_partition_index
= 0;
2751 const struct flash_partition_entry
*flash_first_partition
= NULL
;
2752 const struct flash_partition_entry
*flash_last_partition
= NULL
;
2753 const struct image_partition_entry
*image_last_partition
= NULL
;
2755 /** Find first and last partitions */
2756 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2757 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
2758 flash_first_partition
= &info
->partitions
[i
];
2759 flash_first_partition_index
= i
;
2760 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
2761 flash_last_partition
= &info
->partitions
[i
];
2762 flash_last_partition_index
= i
;
2766 assert(flash_first_partition
&& flash_last_partition
);
2767 assert(flash_first_partition_index
< flash_last_partition_index
);
2769 /** Find last partition from image to calculate needed size */
2770 for (i
= 0; image_parts
[i
].name
; i
++) {
2771 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
2772 image_last_partition
= &image_parts
[i
];
2777 assert(image_last_partition
);
2779 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
2781 uint8_t *image
= malloc(*len
);
2783 error(1, errno
, "malloc");
2785 memset(image
, 0xff, *len
);
2787 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
2788 for (j
= 0; image_parts
[j
].name
; j
++) {
2789 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
2790 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
2791 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
2792 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
2796 assert(image_parts
[j
].name
);
2803 /** Generates an image according to a given layout and writes it to a file */
2804 static void build_image(const char *output
,
2805 const char *kernel_image
,
2806 const char *rootfs_image
,
2810 struct device_info
*info
) {
2814 struct image_partition_entry parts
[7] = {};
2816 struct flash_partition_entry
*firmware_partition
= NULL
;
2817 struct flash_partition_entry
*os_image_partition
= NULL
;
2818 struct flash_partition_entry
*file_system_partition
= NULL
;
2819 size_t firmware_partition_index
= 0;
2821 for (i
= 0; info
->partitions
[i
].name
; i
++) {
2822 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
2824 firmware_partition
= &info
->partitions
[i
];
2825 firmware_partition_index
= i
;
2829 if (firmware_partition
)
2831 os_image_partition
= &info
->partitions
[firmware_partition_index
];
2832 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
2835 if (stat(kernel_image
, &kernel
) < 0)
2836 error(1, errno
, "unable to stat file `%s'", kernel_image
);
2838 if (kernel
.st_size
> firmware_partition
->size
)
2839 error(1, 0, "kernel overflowed firmware partition\n");
2841 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
2842 info
->partitions
[i
+1] = info
->partitions
[i
];
2844 file_system_partition
->name
= "file-system";
2845 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
2847 /* Align partition start to erase blocks for factory images only */
2849 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
2851 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
2853 os_image_partition
->name
= "os-image";
2854 os_image_partition
->size
= kernel
.st_size
;
2857 parts
[0] = make_partition_table(info
->partitions
);
2858 parts
[1] = make_soft_version(info
, rev
);
2859 parts
[2] = make_support_list(info
);
2860 parts
[3] = read_file("os-image", kernel_image
, false, NULL
);
2861 parts
[4] = read_file("file-system", rootfs_image
, add_jffs2_eof
, file_system_partition
);
2863 /* Some devices need the extra-para partition to accept the firmware */
2864 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
2865 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
2866 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
2867 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
2868 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
2869 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
2870 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
2871 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
2872 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
2873 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
2874 const uint8_t extra_para
[2] = {0x01, 0x00};
2875 parts
[5] = make_extra_para(info
, extra_para
,
2876 sizeof(extra_para
));
2877 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0) {
2878 const uint8_t extra_para
[2] = {0x00, 0x01};
2879 parts
[5] = make_extra_para(info
, extra_para
,
2880 sizeof(extra_para
));
2881 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
2882 strcasecmp(info
->id
, "EAP245-V3") == 0) {
2883 const uint8_t extra_para
[2] = {0x01, 0x01};
2884 parts
[5] = make_extra_para(info
, extra_para
,
2885 sizeof(extra_para
));
2891 image
= generate_sysupgrade_image(info
, parts
, &len
);
2893 image
= generate_factory_image(info
, parts
, &len
);
2895 FILE *file
= fopen(output
, "wb");
2897 error(1, errno
, "unable to open output file");
2899 if (fwrite(image
, len
, 1, file
) != 1)
2900 error(1, 0, "unable to write output file");
2906 for (i
= 0; parts
[i
].name
; i
++)
2907 free_image_partition(parts
[i
]);
2911 static void usage(const char *argv0
) {
2913 "Usage: %s [OPTIONS...]\n"
2916 " -h show this help\n"
2918 "Create a new image:\n"
2919 " -B <board> create image for the board specified with <board>\n"
2920 " -k <file> read kernel image from the file <file>\n"
2921 " -r <file> read rootfs image from the file <file>\n"
2922 " -o <file> write output to the file <file>\n"
2923 " -V <rev> sets the revision number to <rev>\n"
2924 " -j add jffs2 end-of-filesystem markers\n"
2925 " -S create sysupgrade instead of factory image\n"
2926 "Extract an old image:\n"
2927 " -x <file> extract all oem firmware partition\n"
2928 " -d <dir> destination to extract the firmware partition\n"
2929 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
2935 static struct device_info
*find_board(const char *id
)
2937 struct device_info
*board
= NULL
;
2939 for (board
= boards
; board
->id
!= NULL
; board
++)
2940 if (strcasecmp(id
, board
->id
) == 0)
2946 static int add_flash_partition(
2947 struct flash_partition_entry
*part_list
,
2954 /* check if the list has a free entry */
2955 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
2956 if (part_list
->name
== NULL
&&
2957 part_list
->base
== 0 &&
2958 part_list
->size
== 0)
2962 if (ptr
== max_entries
) {
2963 error(1, 0, "No free flash part entry available.");
2966 part_list
->name
= calloc(1, strlen(name
) + 1);
2967 if (!part_list
->name
) {
2968 error(1, 0, "Unable to allocate memory");
2971 memcpy((char *)part_list
->name
, name
, strlen(name
));
2972 part_list
->base
= base
;
2973 part_list
->size
= size
;
2978 /** read the partition table into struct flash_partition_entry */
2979 static int read_partition_table(
2980 FILE *file
, long offset
,
2981 struct flash_partition_entry
*entries
, size_t max_entries
,
2986 const char *parthdr
= NULL
;
2987 const char *fwuphdr
= "fwup-ptn";
2988 const char *flashhdr
= "partition";
2990 /* TODO: search for the partition table */
3000 error(1, 0, "Invalid partition table");
3003 if (fseek(file
, offset
, SEEK_SET
) < 0)
3004 error(1, errno
, "Can not seek in the firmware");
3006 if (fread(buf
, 2048, 1, file
) != 1)
3007 error(1, errno
, "Can not read fwup-ptn from the firmware");
3011 /* look for the partition header */
3012 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
3013 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
3018 end
= buf
+ sizeof(buf
);
3019 while ((ptr
+ strlen(parthdr
)) < end
&&
3020 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
3024 char name
[32] = { 0 };
3026 unsigned long base
= 0;
3027 unsigned long size
= 0;
3029 end_part
= memchr(ptr
, '\n', (end
- ptr
));
3030 if (end_part
== NULL
) {
3031 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
3035 for (int i
= 0; i
<= 4; i
++) {
3036 if (end_part
<= ptr
)
3039 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
3040 if (end_element
== NULL
) {
3041 error(1, errno
, "Ignoring the rest of the partition entries.");
3046 /* partition header */
3048 ptr
= end_element
+ 1;
3052 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
3053 strncpy(name
, ptr
, name_len
);
3054 name
[name_len
] = '\0';
3055 ptr
= end_element
+ 1;
3060 ptr
= end_element
+ 1;
3065 base
= strtoul(ptr
, NULL
, 16);
3066 ptr
= end_element
+ 1;
3071 ptr
= end_element
+ 1;
3072 /* actual size. The last element doesn't have a sepeartor */
3073 size
= strtoul(ptr
, NULL
, 16);
3074 /* the part ends with 0x09, 0x0d, 0x0a */
3076 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3085 static void write_partition(
3087 size_t firmware_offset
,
3088 struct flash_partition_entry
*entry
,
3094 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3096 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3097 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3098 error(1, errno
, "Can not read partition from input_file");
3100 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3101 error(1, errno
, "Can not write partition to output_file");
3103 /* write last chunk smaller than buffer */
3104 if (offset
< entry
->size
) {
3105 offset
= entry
->size
- offset
;
3106 if (fread(buf
, offset
, 1, input_file
) != 1)
3107 error(1, errno
, "Can not read partition from input_file");
3108 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3109 error(1, errno
, "Can not write partition to output_file");
3113 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3116 char output
[PATH_MAX
];
3118 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3119 output_file
= fopen(output
, "wb+");
3120 if (output_file
== NULL
) {
3121 error(1, errno
, "Can not open output file %s", output
);
3124 write_partition(input_file
, firmware_offset
, entry
, output_file
);
3126 fclose(output_file
);
3131 /** extract all partitions from the firmware file */
3132 static int extract_firmware(const char *input
, const char *output_directory
)
3134 struct flash_partition_entry entries
[16] = { 0 };
3135 size_t max_entries
= 16;
3136 size_t firmware_offset
= 0x1014;
3139 struct stat statbuf
;
3141 /* check input file */
3142 if (stat(input
, &statbuf
)) {
3143 error(1, errno
, "Can not read input firmware %s", input
);
3146 /* check if output directory exists */
3147 if (stat(output_directory
, &statbuf
)) {
3148 error(1, errno
, "Failed to stat output directory %s", output_directory
);
3151 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
3152 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
3155 input_file
= fopen(input
, "rb");
3157 if (read_partition_table(input_file
, firmware_offset
, entries
, 16, 0) != 0) {
3158 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3161 for (size_t i
= 0; i
< max_entries
; i
++) {
3162 if (entries
[i
].name
== NULL
&&
3163 entries
[i
].base
== 0 &&
3164 entries
[i
].size
== 0)
3167 extract_firmware_partition(input_file
, firmware_offset
, &entries
[i
], output_directory
);
3173 static struct flash_partition_entry
*find_partition(
3174 struct flash_partition_entry
*entries
, size_t max_entries
,
3175 const char *name
, const char *error_msg
)
3177 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
3178 if (strcmp(entries
->name
, name
) == 0)
3182 error(1, 0, "%s", error_msg
);
3186 static void write_ff(FILE *output_file
, size_t size
)
3191 memset(buf
, 0xff, sizeof(buf
));
3193 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
3194 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3195 error(1, errno
, "Can not write 0xff to output_file");
3198 /* write last chunk smaller than buffer */
3199 if (offset
< size
) {
3200 offset
= size
- offset
;
3201 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3202 error(1, errno
, "Can not write partition to output_file");
3206 static void convert_firmware(const char *input
, const char *output
)
3208 struct flash_partition_entry fwup
[MAX_PARTITIONS
] = { 0 };
3209 struct flash_partition_entry flash
[MAX_PARTITIONS
] = { 0 };
3210 struct flash_partition_entry
*fwup_os_image
= NULL
, *fwup_file_system
= NULL
;
3211 struct flash_partition_entry
*flash_os_image
= NULL
, *flash_file_system
= NULL
;
3212 struct flash_partition_entry
*fwup_partition_table
= NULL
;
3213 size_t firmware_offset
= 0x1014;
3214 FILE *input_file
, *output_file
;
3216 struct stat statbuf
;
3218 /* check input file */
3219 if (stat(input
, &statbuf
)) {
3220 error(1, errno
, "Can not read input firmware %s", input
);
3223 input_file
= fopen(input
, "rb");
3225 error(1, 0, "Can not open input firmware %s", input
);
3227 output_file
= fopen(output
, "wb");
3229 error(1, 0, "Can not open output firmware %s", output
);
3231 if (read_partition_table(input_file
, firmware_offset
, fwup
, MAX_PARTITIONS
, 0) != 0) {
3232 error(1, 0, "Error can not read the partition table (fwup-ptn)");
3235 fwup_os_image
= find_partition(fwup
, MAX_PARTITIONS
,
3236 "os-image", "Error can not find os-image partition (fwup)");
3237 fwup_file_system
= find_partition(fwup
, MAX_PARTITIONS
,
3238 "file-system", "Error can not find file-system partition (fwup)");
3239 fwup_partition_table
= find_partition(fwup
, MAX_PARTITIONS
,
3240 "partition-table", "Error can not find partition-table partition");
3242 /* the flash partition table has a 0x00000004 magic haeder */
3243 if (read_partition_table(input_file
, firmware_offset
+ fwup_partition_table
->base
+ 4, flash
, MAX_PARTITIONS
, 1) != 0)
3244 error(1, 0, "Error can not read the partition table (flash)");
3246 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
3247 "os-image", "Error can not find os-image partition (flash)");
3248 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
3249 "file-system", "Error can not find file-system partition (flash)");
3251 /* write os_image to 0x0 */
3252 write_partition(input_file
, firmware_offset
, fwup_os_image
, output_file
);
3253 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
3255 /* write file-system behind os_image */
3256 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
3257 write_partition(input_file
, firmware_offset
, fwup_file_system
, output_file
);
3258 write_ff(output_file
, flash_file_system
->size
- fwup_file_system
->size
);
3260 fclose(output_file
);
3264 int main(int argc
, char *argv
[]) {
3265 const char *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
3266 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
3267 bool add_jffs2_eof
= false, sysupgrade
= false;
3269 struct device_info
*info
;
3270 set_source_date_epoch();
3275 c
= getopt(argc
, argv
, "B:k:r:o:V:jSh:x:d:z:");
3285 kernel_image
= optarg
;
3289 rootfs_image
= optarg
;
3297 sscanf(optarg
, "r%u", &rev
);
3301 add_jffs2_eof
= true;
3313 output_directory
= optarg
;
3317 extract_image
= optarg
;
3321 convert_image
= optarg
;
3330 if (extract_image
|| output_directory
) {
3332 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
3333 if (!output_directory
)
3334 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
3335 extract_firmware(extract_image
, output_directory
);
3336 } else if (convert_image
) {
3338 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
3339 convert_firmware(convert_image
, output
);
3342 error(1, 0, "no board has been specified");
3344 error(1, 0, "no kernel image has been specified");
3346 error(1, 0, "no rootfs image has been specified");
3348 error(1, 0, "no output filename has been specified");
3350 info
= find_board(board
);
3353 error(1, 0, "unsupported board %s", board
);
3355 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);