# Copyright (C) 2006-2012 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. # mainmenu "OpenWrt Configuration" config MODULES bool default y config HAVE_DOT_CONFIG bool default y source "target/Config.in" menu "Target Images" menuconfig TARGET_ROOTFS_INITRAMFS bool "ramdisk" default y if USES_INITRAMFS help Embed the rootfs into the kernel (initramfs) choice prompt "Compression" default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips default TARGET_INITRAMFS_COMPRESSION_NONE depends on TARGET_ROOTFS_INITRAMFS help Select ramdisk compression. config TARGET_INITRAMFS_COMPRESSION_NONE bool "none" config TARGET_INITRAMFS_COMPRESSION_GZIP bool "gzip" config TARGET_INITRAMFS_COMPRESSION_BZIP2 bool "bzip2" config TARGET_INITRAMFS_COMPRESSION_LZMA bool "lzma" config TARGET_INITRAMFS_COMPRESSION_LZO bool "lzo" config TARGET_INITRAMFS_COMPRESSION_XZ bool "xz" endchoice config EXTERNAL_CPIO string prompt "Use external cpio" if TARGET_ROOTFS_INITRAMFS default "" help Kernel uses specified external cpio as INITRAMFS_SOURCE comment "Root filesystem archives" config TARGET_ROOTFS_CPIOGZ bool "cpio.gz" default y if USES_CPIOGZ help Build a compressed cpio archive of the the root filesystem config TARGET_ROOTFS_TARGZ bool "tar.gz" default y if USES_TARGZ help Build a compressed tar archive of the the root filesystem comment "Root filesystem images" config TARGET_ROOTFS_EXT4FS bool "ext4" default y if USES_EXT4 help Ext4 file system with some free space for uml images config TARGET_ROOTFS_ISO bool "iso" default n depends on TARGET_x86_generic help Create some bootable ISO image config TARGET_ROOTFS_JFFS2 bool "jffs2" default y if USES_JFFS2 help Build a jffs2 root filesystem config TARGET_ROOTFS_JFFS2_NAND bool "jffs2 for NAND" default y if USES_JFFS2_NAND depends on USES_JFFS2_NAND help Build a jffs2 root filesystem for NAND flash config TARGET_ROOTFS_SQUASHFS bool "squashfs" default y if USES_SQUASHFS help Build a squashfs-lzma root filesystem menuconfig TARGET_ROOTFS_UBIFS bool "ubifs" default y if USES_UBIFS depends on USES_UBIFS help Build a ubifs root filesystem choice prompt "compression" default TARGET_UBIFS_COMPRESSION_NONE depends on TARGET_ROOTFS_UBIFS help Select compression type config TARGET_UBIFS_COMPRESSION_NONE bool "none" config TARGET_UBIFS_COMPRESSION_LZO bool "lzo" config TARGET_UBIFS_COMPRESSION_ZLIB bool "zlib" endchoice config TARGET_UBIFS_FREE_SPACE_FIXUP bool "free space fixup" if TARGET_ROOTFS_UBIFS default y help The file-system free space has to be fixed up on first mount config TARGET_UBIFS_JOURNAL_SIZE string prompt "journal size" if TARGET_ROOTFS_UBIFS default "512KiB" config TARGET_UBIFS_SQUASH_UIDS bool "squash uids" if TARGET_ROOTFS_UBIFS default n help Squash owners making all files owned by root comment "Image Options" source "target/linux/*/image/Config.in" config TARGET_ROOTFS_PARTSIZE int "Root filesystem partition size (in MB)" depends on X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532 default 48 help Allows you to change the root filesystem partition size config TARGET_ROOTFS_MAXINODE int "Maximum number of inodes in root filesystem" depends on TARGET_ROOTFS_EXT4FS default 6000 help Allows you to change the maximum number of inodes in the root filesystem config TARGET_ROOTFS_RESERVED_PCT int "Percentage of reserved blocks in root filesystem" depends on TARGET_ROOTFS_EXT4FS default 0 help Allows you to change the percentage of reserved blocks in the root filesystem menuconfig TARGET_ROOTFS_INCLUDE_KERNEL bool "Include kernel in root filesystem" depends on TARGET_ROOTFS_UBIFS || TARGET_ROOTFS_EXT4FS default n if USES_UBIFS help Include the kernel image in the rootfs. Typically the image is placed below /boot. config TARGET_ROOTFS_INCLUDE_UIMAGE bool "include uImage" if TARGET_ROOTFS_INCLUDE_KERNEL default y help This option might not apply to all targets. Make sure to check target/linux//image/Makefile to see if this option will have any effect. config TARGET_ROOTFS_INCLUDE_ZIMAGE bool "include zImage" if TARGET_ROOTFS_INCLUDE_KERNEL default y help This option might not apply to all targets. Make sure to check target/linux//image/Makefile to see if this option will have any effect. config TARGET_ROOTFS_INCLUDE_FIT bool "include FIT" if TARGET_ROOTFS_INCLUDE_KERNEL default y help This option might not apply to all targets. Make sure to check target/linux//image/Makefile to see if this option will have any effect. config TARGET_ROOTFS_INCLUDE_DTB bool "Include DTB in root filesystem" depends on TARGET_ROOTFS_UBIFS || TARGET_ROOTFS_EXT4FS default n if USES_UBIFS help Include the device tree blob file(s) in the rootfs. Typically the DTBs are placed below /boot. endmenu menu "Global build settings" config ALL bool "Select all packages by default" default n comment "General build options" config DISPLAY_SUPPORT bool "Show packages that require graphics support (local or remote)" default n config BUILD_PATENTED default y bool "Compile with support for patented functionality" help When this option is disabled, software which provides patented functionality will not be built. In case software provides optional support for patented functionality, this optional support will get disabled for this package. config BUILD_NLS default n bool "Compile with full language support" help When this option is enabled, packages are built with the full versions of iconv and GNU gettext instead of the default OpenWrt stubs. If uClibc is used, it is also built with locale support. config BUILD_STATIC_TOOLS default n bool "Attempt to link host utilities statically" help Linking host utilities like sed or firmware-utils statically increases the portability of the generated ImageBuilder and SDK tarballs, however it may fail on some Linux distributions. config SHADOW_PASSWORDS bool prompt "Enable shadow password support" default y help Enable shadow password support. config CLEAN_IPKG bool prompt "Remove ipkg/opkg status data files in final images" default n help This removes all ipkg/opkg status data files from the target directory before building the root fs config COLLECT_KERNEL_DEBUG bool prompt "Collect kernel debug information" select KERNEL_DEBUG_INFO default n help This collects debugging symbols from the kernel and all compiled modules. Useful for release builds, so that kernel issues can be debugged offline later. comment "Kernel build options" source "Config-kernel.in" comment "Package build options" config DEBUG bool prompt "Compile packages with debugging info" default n help Adds -g3 to the CFLAGS config IPV6 bool prompt "Enable IPv6 support in packages" default y help Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts). config PKG_BUILD_PARALLEL bool prompt "Compile certain packages parallelized" default y help This adds a -jX option to certain packages that are known to behave well for parallel build. By default the package make processes use the main jobserver, in which case this option only takes effect when you add -jX to the make command. If you are unsure, select N. config PKG_BUILD_USE_JOBSERVER bool prompt "Use top-level make jobserver for packages" depends on PKG_BUILD_PARALLEL default y help This passes the main make process jobserver fds to package builds, enabling full parallelization across different packages Note that disabling this may overcommit CPU resources depending on the -j level of the main make process, the number of package submake jobs selected below and the number of actual CPUs present. Example: If the main make is passed a -j4 and the submake -j is also set to 4, we may end up with 16 parallel make processes in the worst case. config PKG_BUILD_JOBS int prompt "Number of package submake jobs (2-512)" range 2 512 default 2 depends on PKG_BUILD_PARALLEL && !PKG_BUILD_USE_JOBSERVER help The number of jobs (-jX) to pass to packages submake. config PKG_DEFAULT_PARALLEL bool prompt "Parallelize the default package build rule (May break build)" depends on PKG_BUILD_PARALLEL depends on BROKEN default n help Always set the default package build rules to parallel build. WARNING: This may break build or kill your cat, as it builds packages with multiple jobs that are probably not tested in a parallel build environment. Only say Y, if you don't mind fixing broken packages. Before reporting build bugs, set this to N and re-run the build. comment "Stripping options" choice prompt "Binary stripping method" default USE_STRIP if EXTERNAL_TOOLCHAIN default USE_STRIP if USE_GLIBC || USE_EGLIBC || USE_MUSL default USE_SSTRIP help Select the binary stripping method you wish to use. config NO_STRIP bool "none" help This will install unstripped binaries (useful for native compiling/debugging) config USE_STRIP bool "strip" help This will install binaries stripped using strip from binutils config USE_SSTRIP bool "sstrip" depends on !DEBUG depends on !USE_GLIBC depends on !USE_EGLIBC help This will install binaries stripped using sstrip endchoice config STRIP_ARGS string prompt "Strip arguments" depends on USE_STRIP default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG default "--strip-all" help Specifies arguments passed to the strip command when stripping binaries config STRIP_KERNEL_EXPORTS bool "Strip unnecessary exports from the kernel image" help Reduces kernel size by stripping unused kernel exports from the kernel image Note that this might make the kernel incompatible with any kernel modules that were not selected at the time the kernel image was created config USE_MKLIBS bool "Strip unnecessary functions from libraries" help Reduces libraries to only those functions that are necessary for using all selected packages (including those selected as ) Note that this will make the system libraries incompatible with most of the packages that are not selected during the build process choice prompt "Preferred standard C++ library" default USE_LIBSTDCXX if USE_EGLIBC default USE_UCLIBCXX help Select the preferred standard C++ library for all packages that support this. config USE_UCLIBCXX bool "uClibc++" config USE_LIBSTDCXX bool "libstdc++" endchoice endmenu menuconfig DEVEL bool "Advanced configuration options (for developers)" default n config BROKEN bool "Show broken platforms / packages" if DEVEL default n config DOWNLOAD_FOLDER string "Download folder" if DEVEL default "" config LOCALMIRROR string "Local mirror for source packages" if DEVEL default "" config AUTOREBUILD bool "Automatic rebuild of packages" if DEVEL default y help Automatically rebuild packages when their files change config BUILD_SUFFIX string "Build suffix to append to the BUILD_DIR variable" if DEVEL default "" help Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix config TARGET_ROOTFS_DIR string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL default "" help Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path. Use this option to re-define the location of the target root file system directory. config CCACHE bool "Use ccache" if DEVEL default n help Compiler cache; see http://ccache.samba.org/ config EXTERNAL_KERNEL_TREE string "Use external kernel tree" if DEVEL default "" config KERNEL_GIT_CLONE_URI string "Enter git repository to clone" if DEVEL default "" help Enter the full git repository path i.e.: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git This will create a git clone of the kernel in your build directory. config KERNEL_GIT_LOCAL_REPOSITORY string "Enter path to local reference repository" if DEVEL default "" help Enter a full pathname to a local reference git repository. In this instance, the --refererence option of git clone will be used thus creating a quick local clone of your repo. config BUILD_LOG bool "Enable log files during build process" if DEVEL help If enabled log files will be written to the ./log directory config SRC_TREE_OVERRIDE bool "Enable package source tree override" if DEVEL help If enabled, you can force a package to use a git tree as source code instead of the normal tarball. Create a symlink 'git-src' in the package directory, pointing to the .git tree that you want to pull the source code from config EXTRA_OPTIMIZATION string "Additional compiler options" if DEVEL default "-fno-caller-saves" help Extra Target-independent optimizations to use when building for the target. menuconfig TARGET_OPTIONS bool "Target Options" if DEVEL config TARGET_OPTIMIZATION string "Target Optimizations" if TARGET_OPTIONS default DEFAULT_TARGET_OPTIMIZATION help Optimizations to use when building for the target host. config SOFT_FLOAT bool "Use software floating point by default" if TARGET_OPTIONS default y depends on (arm || armeb || powerpc || mipsel || mips || mips64el || mips64) && !HAS_FPU help If your target CPU does not have a Floating Point Unit (FPU) or a kernel FPU emulator, but you still wish to support floating point functions, then everything will need to be compiled with soft floating point support (-msoft-float). Most people will answer N. config USE_MIPS16 bool "Build packages with MIPS16 instructions" if TARGET_OPTIONS depends on HAS_MIPS16 depends on !GCC_VERSION_4_6 default y help If your target CPU does support the MIPS16 instruction set and you want to use it for packages, enable this option. MIPS16 produces smaller binaries thus reducing pressure on caches and TLB. Most people will answer N. source "toolchain/Config.in" source "target/imagebuilder/Config.in" source "target/sdk/Config.in" source "target/toolchain/Config.in" source "tmp/.config-package.in"