DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE # mkubntimage is using the kernel image direct # routerboard creates partitions out of the ubnt header define Build/mkubntimage -$(STAGING_DIR_HOST)/bin/mkfwimage \ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ -k $(IMAGE_KERNEL) \ -r $@ \ -o $@ endef # all UBNT XM device expect the kernel image to have 1024k while flash, when # booting the image, the size doesn't matter. define Build/mkubntimage-split -[ -f $@ ] && ( \ dd if=$@ of=$@.old1 bs=1024k count=1; \ dd if=$@ of=$@.old2 bs=1024k skip=1; \ $(STAGING_DIR_HOST)/bin/mkfwimage \ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ -k $@.old1 \ -r $@.old2 \ -o $@; \ rm $@.old1 $@.old2 ) endef define Build/mkubntimage2 -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ -p jffs2:0x50000:0xf60000:0:0:$@ \ -o $@.new @mv $@.new $@ endef # UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) # UBNT_TYPE e.g. one of (BZ, XM, XW) # UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) define Device/ubnt DEVICE_PACKAGES := kmod-usb-core kmod-usb2 DEVICE_PROFILE := UBNT IMAGE_SIZE := 7552k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro UBNT_BOARD := XM IMAGES := sysupgrade.bin factory.bin IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split endef define Device/ubnt-xm $(Device/ubnt) DEVICE_PACKAGES += kmod-usb-ohci UBNT_TYPE := XM UBNT_CHIP := ar7240 KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma | uImage lzma endef define Device/ubnt-xw $(Device/ubnt) UBNT_TYPE := XW UBNT_CHIP := ar934x endef define Device/ubnt-bz $(Device/ubnt) UBNT_TYPE := BZ UBNT_CHIP := ar7240 endef define Device/rw2458n $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti RW2458N BOARDNAME := RW2458N endef TARGET_DEVICES += rw2458n define Device/ubnt-airrouter $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti AirRouter BOARDNAME := UBNT-AR endef TARGET_DEVICES += ubnt-airrouter define Device/ubnt-bullet-m $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Bullet-M BOARDNAME := UBNT-BM endef TARGET_DEVICES += ubnt-bullet-m define Device/ubnt-rocket-m $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Rocket-M BOARDNAME := UBNT-RM endef TARGET_DEVICES += ubnt-rocket-m define Device/ubnt-nano-m $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Nano-M BOARDNAME := UBNT-NM endef TARGET_DEVICES += ubnt-nano-m define Device/ubnt-unifi $(Device/ubnt-bz) DEVICE_TITLE := Ubiquiti UniFi BOARDNAME := UBNT-UF DEVICE_PROFILE += UBNTUNIFI endef TARGET_DEVICES += ubnt-unifi define Device/ubnt-unifiac DEVICE_PACKAGES := kmod-usb-core kmod-usb2 DEVICE_PROFILE := UBNT IMAGE_SIZE := 7744k MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) endef define Device/ubnt-unifiac-lite $(Device/ubnt-unifiac) DEVICE_TITLE := Ubiquiti UniFi AC-Lite DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct DEVICE_PROFILE += UBNTUNIFIACLITE BOARDNAME := UBNT-UF-AC-LITE endef TARGET_DEVICES += ubnt-unifiac-lite define Device/ubnt-unifiac-mesh $(Device/ubnt-unifiac-lite) DEVICE_TITLE := Ubiquiti UniFi AC-Mesh endef TARGET_DEVICES += ubnt-unifiac-mesh define Device/ubnt-unifiac-pro $(Device/ubnt-unifiac) DEVICE_TITLE := Ubiquiti UniFi AC-Pro DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct DEVICE_PROFILE += UBNTUNIFIACPRO BOARDNAME := UBNT-UF-AC-PRO endef TARGET_DEVICES += ubnt-unifiac-pro define Device/ubnt-unifiac-mesh-pro $(Device/ubnt-unifiac-pro) DEVICE_TITLE := Ubiquiti UniFi AC-Mesh-Pro endef TARGET_DEVICES += ubnt-unifiac-mesh-pro define Device/ubnt-unifi-outdoor $(Device/ubnt-bz) DEVICE_TITLE := Ubiquiti UniFi Outdoor BOARDNAME := UBNT-U20 DEVICE_PROFILE += UBNTUNIFIOUTDOOR endef TARGET_DEVICES += ubnt-unifi-outdoor define Device/ubnt-nano-m-xw $(Device/ubnt-xw) DEVICE_TITLE := Ubiquiti Nano M XW BOARDNAME := UBNT-NM-XW endef TARGET_DEVICES += ubnt-nano-m-xw define Device/ubnt-lbe-m5 $(Device/ubnt-xw) DEVICE_TITLE := Ubiquiti Litebeam M5 BOARDNAME := UBNT-LBE-M5 endef TARGET_DEVICES += ubnt-lbe-m5 define Device/ubnt-loco-m-xw $(Device/ubnt-xw) DEVICE_TITLE := Ubiquiti Loco XW BOARDNAME := UBNT-LOCO-XW endef TARGET_DEVICES += ubnt-loco-m-xw define Device/ubnt-rocket-m-xw $(Device/ubnt-xw) DEVICE_TITLE := Ubiquiti Rocket M XW BOARDNAME := UBNT-RM-XW endef TARGET_DEVICES += ubnt-rocket-m-xw define Device/ubnt-rocket-m-ti $(Device/ubnt-xw) DEVICE_TITLE := Ubiquiti Rocket M TI BOARDNAME := UBNT-RM-TI UBNT_TYPE := TI endef TARGET_DEVICES += ubnt-rocket-m-ti define Device/ubnt-air-gateway $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Air Gateway BOARDNAME := UBNT-AGW UBNT_TYPE := AirGW UBNT_CHIP := ar933x CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += ubnt-air-gateway define Device/ubnt-air-gateway-pro $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Air Gateway Pro BOARDNAME := UBNT-AGWP UBNT_TYPE := AirGWP UBNT_CHIP := ar934x endef TARGET_DEVICES += ubnt-air-gateway-pro define Device/ubdev01 $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti ubDEV01 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro BOARDNAME := UBNT-UF UBNT_BOARD := UBDEV01 endef TARGET_DEVICES += ubdev01 define Device/ubnt-routerstation DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 DEVICE_PROFILE := UBNT IMAGE_SIZE := 16128k IMAGES := sysupgrade.bin factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE) endef define Device/ubnt-rs $(Device/ubnt-routerstation) DEVICE_TITLE := Ubiquiti RouterStation BOARDNAME := UBNT-RS DEVICE_PROFILE += UBNTRS UBNT_BOARD := RS UBNT_TYPE := RSx UBNT_CHIP := ar7100 endef TARGET_DEVICES += ubnt-rs define Device/ubnt-rspro $(Device/ubnt-routerstation) DEVICE_TITLE := Ubiquiti RouterStation Pro BOARDNAME := UBNT-RSPRO DEVICE_PROFILE += UBNTRSPRO UBNT_BOARD := RSPRO UBNT_TYPE := RSPRO UBNT_CHIP := ar7100pro endef TARGET_DEVICES += ubnt-rspro define Device/ubnt-ls-sr71 $(Device/ubnt-routerstation) DEVICE_TITLE := Ubiquiti LS-SR71 BOARDNAME := UBNT-LS-SR71 UBNT_BOARD := LS-SR71 UBNT_TYPE := LS-SR71 UBNT_CHIP := ar7100 endef TARGET_DEVICES += ubnt-ls-sr71 define Device/ubnt-uap-pro DEVICE_TITLE := Ubiquiti UAP Pro KERNEL_SIZE := 2048k IMAGE_SIZE := 15744k MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2048k(kernel),13696k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) UBNT_TYPE := BZ UBNT_CHIP := ar934x BOARDNAME := UAP-PRO DEVICE_PROFILE := UBNT UAPPRO KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0 IMAGES := sysupgrade.bin factory.bin IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2 endef TARGET_DEVICES += ubnt-uap-pro define Device/ubnt-unifi-outdoor-plus $(Device/ubnt-uap-pro) DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus UBNT_CHIP := ar7240 BOARDNAME := UBNT-UOP DEVICE_PROFILE := UBNT endef TARGET_DEVICES += ubnt-unifi-outdoor-plus