// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include #include #include "ar7240.dtsi" / { aliases { led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; reset { label = "reset"; linux,code = ; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; wps { label = "wps"; linux,code = ; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&switch_led_pins>; led_system: system { label = "tp-link:green:system"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; qss { label = "tp-link:green:qss"; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; }; lan1 { label = "tp-link:green:lan1"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; lan2 { label = "tp-link:green:lan2"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; lan3 { label = "tp-link:green:lan3"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; lan4 { label = "tp-link:green:lan4"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; wan { label = "tp-link:green:wan"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; ath9k-leds { compatible = "gpio-leds"; wlan { label = "tp-link:green:wlan"; gpios = <&ath9k 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; }; }; &spi { status = "okay"; num-cs = <1>; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { reg = <0x0 0x20000>; label = "u-boot"; read-only; }; firmware: partition@20000 { compatible = "tplink,firmware"; reg = <0x20000 0x3d0000>; label = "firmware"; }; art: partition@3f0000 { reg = <0x3f0000 0x10000>; label = "art"; read-only; }; }; }; }; ð0 { status = "okay"; mtd-mac-address = <&uboot 0x1fc00>; mtd-mac-address-increment = <(-1)>; }; ð1 { status = "okay"; mtd-mac-address = <&uboot 0x1fc00>; mtd-mac-address-increment = <1>; }; &pcie { status = "okay"; ath9k: wifi@0,0 { compatible = "pci168c,002b"; reg = <0x0000 0 0 0 0>; qca,no-eeprom; mtd-mac-address = <&uboot 0x1fc00>; #gpio-cells = <2>; gpio-controller; }; }; &pinmux { switch_led_pins: pinmux_switch_led_pins { pinctrl-single,bits = <0x0 0x0 0xf8>; }; }; &uart { status = "okay"; };