// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include #include #include "ar7241.dtsi" / { aliases { led-status = &led_system; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; linux,code = ; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; qss { label = "qss"; linux,code = ; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; gpio_leds: gpio-leds { compatible = "gpio-leds"; led_system: system { label = "tp-link:green:system"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; qss { label = "tp-link:green:qss"; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; }; }; }; &spi { status = "okay"; num-cs = <1>; flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { reg = <0x0 0x20000>; label = "u-boot"; read-only; }; partition@20000 { reg = <0x20000 0x3d0000>; label = "firmware"; }; partition@3f0000 { reg = <0x3f0000 0x10000>; label = "art"; read-only; }; }; }; }; &pcie { status = "okay"; ath9k: wifi@0 { reg = <0x0000 0 0 0 0>; #gpio-cells = <2>; gpio-controller; qca,no-eeprom; mtd-mac-address = <&uboot 0x1fc00>; }; }; ð0 { status = "okay"; phy-handle = <&phy4>; mtd-mac-address = <&uboot 0x1fc00>; mtd-mac-address-increment = <(-1)>; }; ð1 { status = "okay"; mtd-mac-address = <&uboot 0x1fc00>; mtd-mac-address-increment = <1>; }; &mdio0 { status = "okay"; phy4: ethernet-phy@4 { reg = <4>; phy-mode = "mii"; }; }; &gpio { status = "okay"; }; &uart { status = "okay"; };