// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca953x.dtsi" #include #include #include / { aliases { label-mac-device = ð0; led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; }; keys: keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; leds: leds { compatible = "gpio-leds"; led_system: system { label = "blue:system"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; default-state = "on"; }; wan { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; lan { function = LED_FUNCTION_LAN; color = ; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; }; &pcie0 { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&cal_art_5000>; nvmem-cell-names = "calibration"; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; read-only; }; pridata: partition@50000 { label = "pri-data"; reg = <0x050000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_pridata_400: macaddr@400 { compatible = "mac-base"; reg = <0x400 0x6>; #nvmem-cell-cells = <1>; }; cal_art_5000: calibration@5000 { reg = <0x5000 0x844>; }; }; }; art: partition@60000 { label = "art"; reg = <0x060000 0x010000>; read-only; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_pridata_400 1>; nvmem-cell-names = "mac-address"; }; ð1 { nvmem-cells = <&macaddr_pridata_400 0>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; };