DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION # On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like # VERSION_DIST being on the place of major(?) version number, so we need to # use some number. UBNT_REVISION := $(VERSION_DIST)-$(REVISION) # mkubntimage is using the kernel image direct # routerboard creates partitions out of the ubnt header define Build/mkubntimage -$(STAGING_DIR_HOST)/bin/mkfwimage \ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ -k $(IMAGE_KERNEL) \ -r $@ \ -o $@ endef # all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when # booting the image, the size doesn't matter. define Build/mkubntimage-split -[ -f $@ ] && ( \ dd if=$@ of=$@.old1 bs=1024k count=1; \ dd if=$@ of=$@.old2 bs=1024k skip=1; \ $(STAGING_DIR_HOST)/bin/mkfwimage \ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \ -k $@.old1 \ -r $@.old2 \ -o $@; \ rm $@.old1 $@.old2 ) endef # UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) # UBNT_TYPE e.g. one of (BZ, XM, XW) # UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) # UBNT_VERSION e.g. one of (6.0.0, 8.5.0) define Device/ubnt DEVICE_PACKAGES := kmod-usb-core kmod-usb2 IMAGE_SIZE := 7552k UBNT_BOARD := XM UBNT_VERSION := 6.0.0 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split endef define Device/ubnt-xm $(Device/ubnt) DEVICE_PACKAGES += kmod-usb-ohci rssileds UBNT_TYPE := XM UBNT_CHIP := ar7240 ATH_SOC := ar7241 KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma endef define Device/ubnt-bz $(Device/ubnt) UBNT_TYPE := BZ UBNT_CHIP := ar7240 ATH_SOC := ar7241 endef define Device/ubnt-wa $(Device/ubnt) UBNT_TYPE := WA UBNT_CHIP := ar934x UBNT_BOARD := WA UBNT_VERSION := 8.5.0 ATH_SOC := ar9342 endef define Device/ubnt-xw $(Device/ubnt) UBNT_TYPE := XW UBNT_CHIP := ar934x UBNT_BOARD := XM UBNT_VERSION := 6.0.4 UBNT_REVISION := 42.$(UBNT_REVISION) ATH_SOC := ar9342 endef define Device/ubnt_airrouter $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti AirRouter SUPPORTED_DEVICES += airrouter endef TARGET_DEVICES += ubnt_airrouter define Device/ubnt_bullet-m $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Bullet-M SUPPORTED_DEVICES += bullet-m endef TARGET_DEVICES += ubnt_bullet-m define Device/ubnt_bullet-m-xw $(Device/ubnt-xw) DEVICE_TITLE := Ubiquiti Bullet-M (XW) SUPPORTED_DEVICES += bullet-m-xw endef TARGET_DEVICES += ubnt_bullet-m-xw define Device/ubnt_rocket-m $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Rocket-M SUPPORTED_DEVICES += rocket-m endef TARGET_DEVICES += ubnt_rocket-m define Device/ubnt_nanostation-m $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Nanostation M SUPPORTED_DEVICES += nano-m endef TARGET_DEVICES += ubnt_nanostation-m define Device/ubnt_nanostation-m-xw $(Device/ubnt-xw) DEVICE_TITLE := Ubiquiti Nanostation M (XW) SUPPORTED_DEVICES += nano-m-xw endef TARGET_DEVICES += ubnt_nanostation-m-xw define Device/ubnt_lap-120 $(Device/ubnt-wa) DEVICE_TITLE := Ubiquiti LiteAP ac (LAP-120) DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15744k IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split endef TARGET_DEVICES += ubnt_lap-120 define Device/ubnt_nanobeam-ac $(Device/ubnt-wa) DEVICE_TITLE := Ubiquiti NanoBeam AC DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15744k IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split endef TARGET_DEVICES += ubnt_nanobeam-ac define Device/ubnt_nanostation-ac $(Device/ubnt-wa) DEVICE_TITLE := Ubiquiti Nanostation AC DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15744k IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split endef TARGET_DEVICES += ubnt_nanostation-ac define Device/ubnt_nanostation-ac-loco $(Device/ubnt-wa) DEVICE_TITLE := Ubiquiti Nanostation AC loco DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15744k IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split endef TARGET_DEVICES += ubnt_nanostation-ac-loco define Device/ubnt_unifi $(Device/ubnt-bz) DEVICE_TITLE := Ubiquiti UniFi SUPPORTED_DEVICES += unifi endef TARGET_DEVICES += ubnt_unifi define Device/ubnt_unifiac ATH_SOC := qca9563 IMAGE_SIZE := 7744k DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct endef define Device/ubnt_unifiac-lite $(Device/ubnt_unifiac) DEVICE_TITLE := Ubiquiti UniFi AC-Lite SUPPORTED_DEVICES += ubnt-unifiac-lite endef TARGET_DEVICES += ubnt_unifiac-lite define Device/ubnt_unifiac-mesh $(Device/ubnt_unifiac) DEVICE_TITLE := Ubiquiti UniFi AC-Mesh SUPPORTED_DEVICES += ubnt-unifiac-mesh endef TARGET_DEVICES += ubnt_unifiac-mesh define Device/ubnt_unifiac-mesh-pro $(Device/ubnt_unifiac) DEVICE_TITLE := Ubiquiti UniFi AC-Mesh Pro SUPPORTED_DEVICES += ubnt-unifiac-mesh-pro endef TARGET_DEVICES += ubnt_unifiac-mesh-pro define Device/ubnt_unifiac-pro $(Device/ubnt_unifiac) DEVICE_TITLE := Ubiquiti UniFi AC-Pro DEVICE_PACKAGES += kmod-usb-core kmod-usb2 SUPPORTED_DEVICES += ubnt-unifiac-pro endef TARGET_DEVICES += ubnt_unifiac-pro define Device/ubnt_routerstation_common DEVICE_PACKAGES := -kmod-ath9k -wpad-mini -uboot-envtools kmod-usb-ohci kmod-usb2 fconfig ATH_SOC := ar7161 IMAGE_SIZE := 16128k IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) # IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) KERNEL_INITRAMFS := kernel-bin | append-dtb endef define Device/ubnt_routerstation $(Device/ubnt_routerstation_common) DEVICE_TITLE := Ubiquiti RouterStation UBNT_BOARD := RS UBNT_TYPE := RSx UBNT_CHIP := ar7100 DEVICE_PACKAGES += -swconfig endef TARGET_DEVICES += ubnt_routerstation define Device/ubnt_routerstation-pro $(Device/ubnt_routerstation_common) DEVICE_TITLE := Ubiquiti RouterStation Pro UBNT_BOARD := RSPRO UBNT_TYPE := RSPRO UBNT_CHIP := ar7100pro endef TARGET_DEVICES += ubnt_routerstation-pro