/*
 * This is a part of mm/cache-v7.S with extracted entry flushing D-cache. We
 * need it for Broadcom devices with broken bootloader leaving cache enabled.
 *
 * Copyright (C) 2001 Deep Blue Solutions Ltd.
 * Copyright (C) 2005 ARM Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/linkage.h>
#include <linux/init.h>

	__INIT

/*
 *	v7_flush_dcache_all()
 *
 *	Flush the whole D-cache.
 *
 *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
 *
 *	- mm    - mm_struct describing address space
 */
ENTRY(v7_flush_dcache_all)
	dmb					@ ensure ordering with previous memory accesses
	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
	mov	r3, r0, lsr #23			@ move LoC into position
	ands	r3, r3, #7 << 1			@ extract LoC*2 from clidr
	beq	finished			@ if loc is 0, then no need to clean
start_flush_levels:
	mov	r10, #0				@ start clean at cache level 0
flush_levels:
	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
	and	r1, r1, #7			@ mask of the bits for current cache only
	cmp	r1, #2				@ see what cache we have at this level
	blt	skip				@ skip if no cache, or just i-cache
#ifdef CONFIG_PREEMPT
	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
#endif
	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
	isb					@ isb to sych the new cssr&csidr
	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
#ifdef CONFIG_PREEMPT
	restore_irqs_notrace r9
#endif
	and	r2, r1, #7			@ extract the length of the cache lines
	add	r2, r2, #4			@ add 4 (line length offset)
	movw	r4, #0x3ff
	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
	clz	r5, r4				@ find bit position of way size increment
	movw	r7, #0x7fff
	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
loop1:
	mov	r9, r7				@ create working copy of max index
loop2:
 ARM(	orr	r11, r10, r4, lsl r5	)	@ factor way and cache number into r11
 THUMB(	lsl	r6, r4, r5		)
 THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
 ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
 THUMB(	lsl	r6, r9, r2		)
 THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
	subs	r9, r9, #1			@ decrement the index
	bge	loop2
	subs	r4, r4, #1			@ decrement the way
	bge	loop1
skip:
	add	r10, r10, #2			@ increment cache number
	cmp	r3, r10
	bgt	flush_levels
finished:
	mov	r10, #0				@ swith back to cache level 0
	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
	dsb	st
	isb
	ret	lr
ENDPROC(v7_flush_dcache_all)