#!/bin/sh /etc/rc.common # Copyright (C) 2006-2015 OpenWrt.org . /lib/functions/system.sh . /lib/functions/uci-defaults.sh detect_by_vlanports() { local vlan0ports="$(nvram get vlan0ports)" local vlan1ports="$(nvram get vlan1ports)" local vlan2ports="$(nvram get vlan2ports)" local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")" if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \ [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \ [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ]; then ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \ [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \ [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ]; then ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" else logger -t "01_detect" "Unable to determine network configuration" ucidef_set_interface_lan "eth0" fi } detect_by_boardnum() { local boardnum="$1" case "$boardnum" in # WAP54G, Sitecom WL-105b "2" | \ "1024") ucidef_set_interface_lan "eth0" ;; # Generic detection fallback *) detect_by_vlanports ;; esac } detect_by_boardtype() { local boardtype="$1" local boardnum="$2" case "$boardtype" in "bcm94710r4") ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; "0x0467") ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" ;; "0x042f" | \ "0x0472") # WL-500gP if [ "$boardnum" = "45" ]; then ucidef_add_switch "switch0" \ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" # Generic BCM94704 else ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" # MAC addresses on 4704 tend to be screwed up. Add a workaround here local mac="$(nvram get et0macaddr)" local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" case "$mac" in $pat) ucidef_set_interface_macaddr "lan" "$mac" ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)" ;; esac fi ;; # Buffalo WBR-B11 and Buffalo WBR-G54 "bcm94710ap") ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" ;; *) detect_by_boardnum "$boardnum" ;; esac } detect_by_model() { local model="$1" local boardtype="$2" local boardnum="$3" # Netgear WGT634U exception if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then ucidef_add_switch "switch0" \ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" return fi case "$model" in "Asus WLHDD" | \ "Asus WL300G") ucidef_set_interface_lan "eth1" ;; "Asus WL330GE") ucidef_add_switch "switch0" "4:lan" "5t@eth0" ;; "Asus WL500G" | \ "Asus WL500W" | \ "Microsoft MN-700") ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; "Asus WL500GP V2" | \ "Buffalo WHR-G125" | \ "Motorola WR850G" | \ "Siemens SE505 V2") ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" ;; "Asus WL700") ucidef_add_switch "switch0" \ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" ;; "Dell TrueMobile 2300") ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" ;; *) detect_by_boardtype "$boardtype" "$boardnum" ;; esac } local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)" local boardtype="$(nvram get boardtype)" local boardnum="$(nvram get boardnum)" board_config_update ucidef_set_board_id "$boardtype${boardnum:+:$boardnum}" ucidef_set_model_name "$model" detect_by_model "$model" "$boardtype" "$boardnum" board_config_flush