#
# Copyright (C) 2012-2015 OpenWrt.org
#

. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh

kirkwood_setup_interfaces()
{
	local board="$1"

	case "$board" in
	checkpoint,l-50)
		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 dmz" "eth0"
		;;
	cisco,on100)
		ucidef_set_interface_lan "eth0 eth1"
		;;
	cloudengines,pogoe02|\
	cloudengines,pogoplugv4|\
	ctera,c200-v1|\
	globalscale,sheevaplug|\
	iom,iconnect-1.1|\
	iom,ix2-200|\
	iptime,nas1|\
	netgear,readynas-duo-v2|\
	netgear,stora|\
	raidsonic,ib-nas62x0|\
	seagate,blackarmor-nas220|\
	seagate,dockstar|\
	seagate,goflexhome|\
	seagate,goflexnet|\
	zyxel,nsa310b|\
	zyxel,nsa310s|\
	zyxel,nsa325)
		ucidef_set_interface_lan "eth0" "dhcp"
		;;
	endian,4i-edge-200)
		ucidef_set_interface_lan "port1 port2 port3 port4 eth1"
		;;
	iom,ix4-200d)
		ucidef_set_interface_lan "eth0 eth1" "dhcp"
		;;
	linksys,e4200-v2|\
	linksys,ea3500|\
	linksys,ea4500)
		ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet"
		;;
	*)
		ucidef_set_interface_lan "eth0"
		;;
	esac
}

kirkwood_setup_macs()
{
	local board="$1"
	local lan_mac=""
	local wan_mac=""
	local label_mac=""

	case "$board" in
	iptime,nas1)
		lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
		label_mac=$lan_mac
		;;
	linksys,e4200-v2|\
	linksys,ea3500|\
	linksys,ea4500)
		wan_mac=$(mtd_get_mac_ascii u_env eth1addr)
		;;
	zyxel,nsa310b|\
	zyxel,nsa325)
		lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
		;;
	esac

	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}

board_config_update
board=$(board_name)
kirkwood_setup_interfaces $board
kirkwood_setup_macs $board
board_config_flush

exit 0