/dts-v1/; /include/ "vr9.dtsi" / { model = "VG3503J - BT OpenReach VDSL Modem"; chosen { bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; }; aliases { led-boot = &power_green; led-failsafe = &power_red; led-running = &power_green; led-internet = &dsl; }; memory@0 { reg = <0x0 0x2000000>; }; fpi@10000000 { localbus@0 { ranges = <0 0 0x0 0x3ffffff>; nor-boot@0 { compatible = "lantiq,nor"; bank-width = <2>; reg = <0 0x0 0x2000000>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "uboot"; reg = <0x00000 0x20000>; }; partition@20000 { label = "kernel"; reg = <0x20000 0x300000>; }; partition@1a0000 { label = "rootfs"; reg = <0x320000 0x420000>; }; partition@740000 { label = "btagent"; reg = <0x740000 0x80000>; }; partition@7c0000 { label = "pri_bfocus_cfg"; reg = <0x7c0000 0x10000>; }; partition@7d0000 { label = "sec_bfocus_cfg"; reg = <0x7d0000 0x10000>; }; partition@7e0000 { label = "sysconfig"; reg = <0x7e0000 0x10000>; }; partition@7f0000 { label = "misc_cfg"; reg = <0x7f0000 0x10000>; }; }; }; }; gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { mdio { lantiq,groups = "mdio"; lantiq,function = "mdio"; }; gphy-leds { lantiq,groups = "gphy0 led0", "gphy0 led1", "gphy0 led2", "gphy1 led0", "gphy1 led1", "gphy1 led2"; lantiq,function = "gphy"; lantiq,pull = <2>; lantiq,open-drain = <0>; lantiq,output = <1>; }; }; }; }; gphy-xrx200 { compatible = "lantiq,phy-xrx200"; firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/ firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/ phys = [ 00 01 ]; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; reset { label = "reset"; gpios = <&gpio 6 1>; linux,code = <0x198>; }; }; gpio-leds { compatible = "gpio-leds"; power_red: power2 { label = "vg3503j:red:power"; gpios = <&gpio 14 1>; }; dsl: dsl { label = "vg3503j:green:dsl"; gpios = <&gpio 19 1>; }; power_green: power { label = "vg3503j:green:power"; gpios = <&gpio 28 1>; default-state = "keep"; }; }; }; ð0 { interface@0 { compatible = "lantiq,xrx200-pdi"; #address-cells = <1>; #size-cells = <0>; reg = <0>; mac-address = [ 00 11 22 33 44 55 ]; lantiq,switch; ethernet@2 { compatible = "lantiq,xrx200-pdi-port"; reg = <2>; phy-mode = "mii"; phy-handle = <&phy11>; }; ethernet@4 { compatible = "lantiq,xrx200-pdi-port"; reg = <4>; phy-mode = "mii"; phy-handle = <&phy13>; }; }; mdio@0 { #address-cells = <1>; #size-cells = <0>; compatible = "lantiq,xrx200-mdio"; phy11: ethernet-phy@11 { reg = <0x11>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; lantiq,led1h = <0x70>; lantiq,led1l = <0x00>; lantiq,led2h = <0x00>; lantiq,led2l = <0x03>; }; phy13: ethernet-phy@13 { reg = <0x13>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; lantiq,led1h = <0x70>; lantiq,led1l = <0x00>; lantiq,led2h = <0x00>; lantiq,led2l = <0x03>; }; }; };