/include/ "vr9.dtsi" / { model = "VGV7519 - KPN Experiabox V8"; chosen { bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; }; memory@0 { reg = <0x0 0x4000000>; }; fpi@10000000 { #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,fpi", "simple-bus"; ranges = <0x0 0x10000000 0xEEFFFFF>; reg = <0x10000000 0xEF00000>; localbus@0 { #address-cells = <2>; #size-cells = <1>; compatible = "lantiq,localbus", "simple-bus"; }; gpio: pinmux@E100B10 { compatible = "lantiq,pinctrl-xr9"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; interrupt-parent = <&icu0>; interrupts = <166 135 66 40 41 42 38>; #gpio-cells = <2>; gpio-controller; reg = <0xE100B10 0xA0>; state_default: pinmux { exin3 { lantiq,groups = "exin3"; lantiq,function = "exin"; }; stp { lantiq,groups = "stp"; lantiq,function = "stp"; }; spi { lantiq,groups = "spi", "spi_cs4"; lantiq,function = "spi"; }; mdio { lantiq,groups = "mdio"; lantiq,function = "mdio"; }; gphy-leds_out { lantiq,pins = "io7", "io44"; lantiq,pull = <0>; lantiq,output = <1>; }; conf_out { lantiq,pins = "io4", "io5", "io6", /* stp */ "io21", "io33"; lantiq,open-drain; lantiq,pull = <0>; lantiq,output = <1>; }; gphy-leds { lantiq,groups = "gphy0 led1", "gphy1 led0"; lantiq,function = "gphy"; lantiq,open-drain = <0>; }; pcie-rst { lantiq,pins = "io38"; lantiq,pull = <0>; lantiq,output = <1>; }; conf_in { lantiq,pins = "io39"; /* exin3 */ lantiq,pull = <2>; }; }; }; eth@E108000 { #address-cells = <1>; #size-cells = <0>; compatible = "lantiq,xrx200-net"; reg = < 0xE108000 0x3000 /* switch */ 0xE10B100 0x70 /* mdio */ 0xE10B1D8 0x30 /* mii */ 0xE10B308 0x30 /* pmac */ >; interrupt-parent = <&icu0>; interrupts = <73 72>; lan: interface@0 { compatible = "lantiq,xrx200-pdi"; #address-cells = <1>; #size-cells = <0>; reg = <0>; mac-address = [ 00 11 22 33 44 55 ]; ethernet@0 { compatible = "lantiq,xrx200-pdi-port"; reg = <0>; phy-mode = "rgmii"; phy-handle = <&phy0>; }; ethernet@1 { compatible = "lantiq,xrx200-pdi-port"; reg = <1>; phy-mode = "rgmii"; phy-handle = <&phy1>; }; ethernet@2 { compatible = "lantiq,xrx200-pdi-port"; reg = <2>; phy-mode = "gmii"; phy-handle = <&phy11>; }; ethernet@4 { compatible = "lantiq,xrx200-pdi-port"; reg = <4>; phy-mode = "gmii"; phy-handle = <&phy13>; }; }; wan: interface@1 { compatible = "lantiq,xrx200-pdi"; #address-cells = <1>; #size-cells = <0>; reg = <1>; mac-address = [ 00 11 22 33 44 56 ]; lantiq,wan; ethernet@5 { compatible = "lantiq,xrx200-pdi-port"; reg = <5>; phy-mode = "rgmii"; phy-handle = <&phy5>; }; }; mdio@0 { #address-cells = <1>; #size-cells = <0>; compatible = "lantiq,xrx200-mdio"; phy0: ethernet-phy@0 { reg = <0x0>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; lantiq,c45-reg-init = <1 0 0 0>; }; phy1: ethernet-phy@1 { reg = <0x1>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; lantiq,c45-reg-init = <1 0 0 0>; }; phy5: ethernet-phy@5 { reg = <0x5>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; lantiq,c45-reg-init = <1 0 0 0>; }; phy11: ethernet-phy@11 { reg = <0x11>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; lantiq,c45-reg-init = <1 0 0 0>; }; phy13: ethernet-phy@13 { reg = <0x13>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; lantiq,c45-reg-init = <1 0 0 0>; }; }; }; stp: stp@E100BB0 { compatible = "lantiq,gpio-stp-xway"; reg = <0xE100BB0 0x40>; #gpio-cells = <2>; gpio-controller; lantiq,shadow = <0xffff>; lantiq,groups = <0x3>; lantiq,dsl = <0x0>; lantiq,phy1 = <0x0>; lantiq,phy2 = <0x0>; /* lantiq,rising; */ }; ifxhcd@E101000 { status = "okay"; gpios = <&gpio 32 0>; lantiq,portmask = <0x3>; }; pci@E105400 { #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; compatible = "lantiq,pci-xway1"; bus-range = <0x0 0x0>; ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ reg = <0x7000000 0x8000 /* config space */ 0xE105400 0x400>; /* pci bridge */ lantiq,bus-clock = <33333333>; /*lantiq,external-clock;*/ lantiq,delay-hi = <0>; /* 0ns delay */ lantiq,delay-lo = <0>; /* 0.0ns delay */ interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 >; gpios-reset = <&gpio 21 0>; req-mask = <0x1>; /* GNT1 */ }; }; gphy-xrx200 { compatible = "lantiq,phy-xrx200"; firmware = "lantiq/vr9_phy11g_a1x.bin"; phys = [ 00 01 ]; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; reset { label = "reset"; gpios = <&gpio 9 1>; linux,code = <0x198>; }; eco { label = "eco"; gpios = <&gpio 41 1>; linux,code = <247>; }; rfkill { label = "rfkill"; gpios = <&gpio 45 1>; linux,code = <0xf7>; }; wps { label = "wps"; gpios = <&gpio 10 1>; linux,code = <0x211>; }; }; gpio-leds { compatible = "gpio-leds"; eco { /* blue */ label = "eco"; gpios = <&stp 2 1>; }; wps_red { /* red */ label = "wps_red"; gpios = <&stp 3 1>; }; wps_yellow { /* yellow */ label = "wps_yellow"; gpios = <&stp 4 1>; }; upgrade { /* blue */ label = "upgrade"; gpios = <&stp 5 1>; }; tv { /* yellow */ label = "tv"; gpios = <&stp 6 1>; }; internet_yellow { /* yellow */ label = "internet_yellow"; gpios = <&stp 7 1>; }; internet_red { /* red */ label = "internet_red"; gpios = <&stp 8 1>; }; broadband_red { /* red */ label = "broadband_red"; gpios = <&stp 9 1>; }; broadband_yellow { /* yellow */ label = "broadband_yellow"; gpios = <&stp 10 1>; }; voice { /* yellow */ label = "voice"; gpios = <&stp 11 1>; }; wireless_red { /* red */ label = "wireless_red"; gpios = <&stp 12 1>; }; wireless_yellow { /* yellow */ label = "wireless_yellow"; gpios = <&stp 13 1>; }; power2 { /* yellow */ label = "power2"; gpios = <&stp 14 1>; }; power { /* red */ label = "power"; gpios = <&stp 15 1>; default-state = "on"; }; }; };