/include/ "vr9.dtsi" / { model = "VGV7519 - KPN Experiabox V8"; chosen { bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; leds { boot = &power_green; failsafe = &power_red; running = &power_green; dsl = &broadband_green; internet = &internet_green; wifi = &wireless_green; }; }; memory@0 { reg = <0x0 0x4000000>; }; fpi@10000000 { localbus@0 { nor-boot@0 { compatible = "lantiq,nor"; bank-width = <2>; reg = <0 0x0 0x800000>, <1 0x800000 0x800000>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boardconfig: partition@40000 { label = "board_config"; reg = <0x40000 0x10000>; read-only; }; }; }; }; gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { stp { lantiq,groups = "stp"; lantiq,function = "stp"; }; spi { lantiq,groups = "spi_di", "spi_do", "spi_clk"; lantiq,function = "spi"; }; mdio { lantiq,groups = "mdio"; lantiq,function = "mdio"; }; gphy-leds_out { lantiq,pins = "io7", "io44"; lantiq,pull = <0>; lantiq,output = <1>; }; stp_out { lantiq,pins = "io4", "io5", "io6"; lantiq,open-drain = <0>; lantiq,output = <1>; lantiq,pull = <0>; }; pci-rst { lantiq,pins = "io21"; lantiq,open-drain = <0>; lantiq,pull = <0>; lantiq,output = <1>; }; gphy-leds { lantiq,groups = "gphy0 led1", "gphy1 led0"; lantiq,function = "gphy"; lantiq,open-drain = <0>; lantiq,pull = <0>; lantiq,output = <1>; }; }; }; stp: stp@E100BB0 { compatible = "lantiq,gpio-stp-xway"; reg = <0xE100BB0 0x40>; #gpio-cells = <2>; gpio-controller; lantiq,shadow = <0xffff>; lantiq,groups = <0x3>; lantiq,dsl = <0x0>; lantiq,phy1 = <0x0>; lantiq,phy2 = <0x0>; /* lantiq,rising; */ }; ifxhcd@E101000 { status = "okay"; gpios = <&gpio 32 0>; lantiq,portmask = <0x3>; }; pci@E105400 { status = "okay"; lantiq,bus-clock = <33333333>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30 >; gpio-reset = <&gpio 21 0>; req-mask = <0x1>; /* GNT1 */ }; pcie@d900000 { status = "disabled"; }; }; gphy-xrx200 { compatible = "lantiq,phy-xrx200"; firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/ firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/ phys = [ 00 01 ]; }; ralink_eep { compatible = "ralink,eeprom"; ralink,eeprom = "RT2860.eeprom"; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; reset { label = "reset"; gpios = <&gpio 9 1>; linux,code = <0x198>; }; eco { label = "eco"; gpios = <&gpio 41 1>; linux,code = <247>; }; rfkill { label = "rfkill"; gpios = <&gpio 45 1>; linux,code = <0xf7>; }; wps { label = "wps"; gpios = <&gpio 10 1>; linux,code = <0x211>; }; }; gpio-leds { compatible = "gpio-leds"; eco { label = "vgv7519:blue:eco"; gpios = <&stp 2 1>; }; wps_red { label = "vgv7519:red:wps"; gpios = <&stp 3 1>; }; wps_green { label = "vgv7519:green:wps"; gpios = <&stp 4 1>; }; upgrade { label = "vgv7519:blue:upgrade"; gpios = <&stp 5 1>; }; tv { label = "vgv7519:green:tv"; gpios = <&stp 6 1>; }; internet_green: internet_green { label = "vgv7519:green:internet"; gpios = <&stp 7 1>; }; internet_red { label = "vgv7519:red:internet"; gpios = <&stp 8 1>; }; broadband_red { label = "vgv7519:red:broadband"; gpios = <&stp 9 1>; }; broadband_green: broadband_green { label = "vgv7519:green:broadband"; gpios = <&stp 10 1>; }; voice { label = "vgv7519:green:voice"; gpios = <&stp 11 1>; }; wireless_red { label = "vgv7519:red:wireless"; gpios = <&stp 12 1>; }; wireless_green: wireless_green { label = "vgv7519:green:wireless"; gpios = <&stp 13 1>; }; power_green: power2 { label = "vgv7519:green:power"; gpios = <&stp 14 1>; default-state = "keep"; }; power_red: power { label = "vgv7519:red:power"; gpios = <&stp 15 1>; }; }; }; ð0 { lan: interface@0 { compatible = "lantiq,xrx200-pdi"; #address-cells = <1>; #size-cells = <0>; reg = <0>; mac-address = [ 00 11 22 33 44 55 ]; ethernet@0 { compatible = "lantiq,xrx200-pdi-port"; reg = <0>; phy-mode = "rgmii"; phy-handle = <&phy0>; }; ethernet@1 { compatible = "lantiq,xrx200-pdi-port"; reg = <1>; phy-mode = "rgmii"; phy-handle = <&phy1>; }; ethernet@2 { compatible = "lantiq,xrx200-pdi-port"; reg = <2>; phy-mode = "gmii"; phy-handle = <&phy11>; }; ethernet@4 { compatible = "lantiq,xrx200-pdi-port"; reg = <4>; phy-mode = "gmii"; phy-handle = <&phy13>; }; }; wan: interface@1 { compatible = "lantiq,xrx200-pdi"; #address-cells = <1>; #size-cells = <0>; reg = <1>; mac-address = [ 00 11 22 33 44 56 ]; lantiq,wan; ethernet@5 { compatible = "lantiq,xrx200-pdi-port"; reg = <5>; phy-mode = "rgmii"; phy-handle = <&phy5>; }; }; mdio@0 { #address-cells = <1>; #size-cells = <0>; compatible = "lantiq,xrx200-mdio"; phy0: ethernet-phy@0 { reg = <0x0>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; }; phy1: ethernet-phy@1 { reg = <0x1>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; }; phy5: ethernet-phy@5 { reg = <0x5>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; }; phy11: ethernet-phy@11 { reg = <0x11>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; }; phy13: ethernet-phy@13 { reg = <0x13>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; }; }; };