// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { aliases { led-boot = &led_status_amber; led-failsafe = &led_status_green; led-running = &led_status_green; led-upgrade = &led_status_amber; }; chosen { bootargs = "console=ttyS0,115200"; bootargs-override = "console=ttyS0,115200"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_status_amber: led-0 { label = "amber:status"; color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; led_status_green: led-1 { label = "green:status"; color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy4>; }; &mdio { ethphy4: ethernet-phy@4 { reg = <4>; }; }; &nand { status = "okay"; mediatek,nmbm; mediatek,bmt-max-ratio = <1>; mediatek,bmt-max-reserved-blocks = <64>; mediatek,bmt-remap-range = <0x0000000 0x0a00000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0000000 0x0080000>; read-only; }; partition@80000 { label = "u-boot-env"; reg = <0x0080000 0x0080000>; }; partition@100000 { label = "exp"; reg = <0x0100000 0x0080000>; read-only; }; factory: partition@180000 { label = "factory"; reg = <0x0180000 0x0080000>; read-only; }; partition@200000 { label = "firmware"; reg = <0x0200000 0x7600000>; compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; reg = <0x0000000 0x0800000>; }; partition@800000 { label = "ubi"; reg = <0x0800000 0x6e00000>; }; }; /* last 8 MiB is reserved for NMBM bad block table */ }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0>; mediatek,disable-radar-background; }; }; &state_default { gpio { groups = "jtag"; function = "gpio"; }; }; &switch0 { ports { port@1 { status = "okay"; label = "lan1"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan3"; }; }; }; &xhci { status = "disabled"; };