// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7628an.dtsi" #include #include / { aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; lan { label = "green:lan"; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; led_power: power { label = "green:power"; gpios = <&gpio 43 GPIO_ACTIVE_LOW>; }; wlan2g_green { label = "green:wlan2g"; gpios = <&gpio 42 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan2g_orange { label = "orange:wlan2g"; gpios = <&gpio 41 GPIO_ACTIVE_LOW>; }; wan_green { label = "green:wan"; gpios = <&gpio 40 GPIO_ACTIVE_LOW>; }; wan_orange { label = "orange:wan"; gpios = <&gpio 39 GPIO_ACTIVE_LOW>; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <86000000>; m25p,fast-read; partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x40000>; read-only; }; factory: partition@40000 { compatible = "nvmem-cells"; label = "factory"; reg = <0x40000 0x20000>; #address-cells = <1>; #size-cells = <1>; read-only; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; macaddr_factory_4: macaddr@4 { reg = <0x4 0x6>; }; }; partition@60000 { label = "nvram"; reg = <0x60000 0x30000>; read-only; }; }; }; }; &wmac { status = "okay"; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; ðernet { nvmem-cells = <&macaddr_factory_4>; nvmem-cell-names = "mac-address"; }; &pcie { status = "okay"; }; &pcie0 { wifi5: wifi@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; };