// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7628an.dtsi" #include #include / { chosen { bootargs = "console=ttyS0,115200"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "bootloader"; reg = <0x0 0x20000>; read-only; }; partition@20000 { label = "config"; reg = <0x20000 0x10000>; read-only; }; partition@30000 { label = "factory"; reg = <0x30000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_4: macaddr@4 { compatible = "mac-base"; reg = <0x4 0x6>; #nvmem-cell-cells = <1>; }; macaddr_factory_28: macaddr@28 { reg = <0x28 0x6>; }; macaddr_factory_8004: macaddr@8004 { reg = <0x8004 0x6>; }; }; }; partition@40000 { label = "crash"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "cfg_bak"; reg = <0x50000 0x10000>; read-only; }; /* additional partitions in DTS */ }; }; }; &state_default { gpio { groups = "gpio", "refclk", "wdt", "wled_an"; function = "gpio"; }; }; &wmac { status = "okay"; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; };