-# Copyright (C) 2006-2009 OpenWrt.org
+# Copyright (C) 2006-2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
mainmenu "OpenWrt Configuration"
-config HAVE_DOT_CONFIG
- bool
- default y
-
-source "target/Config.in"
-
-menu "Target Images"
- config TARGET_ROOTFS_INITRAMFS
- bool "ramdisk"
- default y if USES_INITRAMFS
- depends LINUX_2_6
- help
- Embed the rootfs into the kernel (initramfs)
-
- choice
- prompt "ramdisk compression"
- depends TARGET_ROOTFS_INITRAMFS
- depends !LINUX_2_6_21
- depends !LINUX_2_6_25
- default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
- default TARGET_INITRAMFS_COMPRESSION_NONE
- help
- Select ramdisk compression.
-
- config TARGET_INITRAMFS_COMPRESSION_NONE
- bool "NONE"
-
- config TARGET_INITRAMFS_COMPRESSION_GZIP
- bool "GZIP"
-
- config TARGET_INITRAMFS_COMPRESSION_BZIP2
- bool "BZIP2"
-
- config TARGET_INITRAMFS_COMPRESSION_LZMA
- bool "LZMA"
-
- config TARGET_INITRAMFS_COMPRESSION_LZO
- bool "LZO"
- endchoice
-
- config TARGET_ROOTFS_JFFS2
- bool "jffs2"
- default y if USES_JFFS2
- depends !TARGET_ROOTFS_INITRAMFS
- help
- Build a jffs2 root filesystem
-
- config TARGET_ROOTFS_SQUASHFS
- bool "squashfs"
- default y if USES_SQUASHFS
- depends !TARGET_ROOTFS_INITRAMFS
- help
- Build a squashfs-lzma root filesystem
-
- config TARGET_ROOTFS_TGZ
- bool "tgz"
- default y if USES_TGZ
- depends !TARGET_ROOTFS_INITRAMFS
- help
- Build a compressed tar archive of the the root filesystem
-
- config TARGET_ROOTFS_CPIOGZ
- bool "cpiogz"
- default y if USES_CPIOGZ
- depends !TARGET_ROOTFS_INITRAMFS
- help
- Build a compressed cpio archive of the the root filesystem
-
- config TARGET_ROOTFS_EXT2FS
- bool "ext2"
- default y if USES_EXT2
- depends !TARGET_ROOTFS_INITRAMFS
- help
- Ext2 file system with some free space for uml images
-
- config TARGET_ROOTFS_ISO
- bool "iso"
- default n
- depends TARGET_ROOTFS_INITRAMFS && TARGET_x86
- help
- Create some bootable ISO image
-
- config TARGET_ROOTFS_UBIFS
- bool "ubifs"
- default y if USES_UBIFS
- depends !TARGET_ROOTFS_INITRAMFS && USES_UBIFS
- help
- Build a ubifs root filesystem
-
-comment "Image Options"
-
-source "target/linux/*/image/Config.in"
-
- config TARGET_ROOTFS_FSPART
- int "Filesystem part size (in MB)"
- depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT2FS || TARGET_rb532 || TARGET_olpc
- default 48
- help
- Allows you to change the filesystem partition size
-
- config TARGET_ROOTFS_MAXINODE
- int "Maximum number of inodes in filesystem"
- depends TARGET_ROOTFS_EXT2FS
- default 6000
- help
- Allows you to change the maximum number of inodes in the filesystem
-
-endmenu
-
-menu "Global build settings"
-
-config ALL
- bool "Select all packages by default"
- default n
-
-comment "General build options"
-
-config CLEAN_IPKG
- bool
- prompt "Disable ipkg/opkg installation on the target"
- default n
- help
- This removes all ipkg data from the target directory before building the root fs
-
-config LARGEFILE
- bool
- prompt "Enable large file (files > 2 GB) support"
- default y
- help
- Enable large file (files > 2 GB) support.
-
-config SHADOW_PASSWORDS
- bool
- prompt "Enable shadow password support"
- default y
- help
- Enable shadow password support.
-
-choice
- prompt "Binary stripping method"
- default USE_STRIP if EXTERNAL_TOOLCHAIN
- default USE_STRIP if USE_GLIBC || USE_EGLIBC
- default USE_SSTRIP
- help
- Select the binary stripping method you wish to use.
-
- config NO_STRIP
- bool "none"
- help
- This will install unstripped binaries (useful for native compiling/debugging)
-
- config USE_STRIP
- bool "strip"
- help
- This will install binaries stripped using strip from binutils
-
-
- config USE_SSTRIP
- bool "sstrip"
- depends !DEBUG
- depends !USE_GLIBC
- depends !USE_EGLIBC
- help
- This will install binaries stripped using sstrip
-
-endchoice
-
-config USE_MKLIBS
- bool "Strip unnecessary functions from libraries"
- help
- Reduces libraries to only those functions that are necessary for using all
- selected packages (including those selected as <M>)
- Note that this will make the system libraries incompatible with most of the packages
- that are not selected during the build process
-
-config STRIP_KERNEL_EXPORTS
- depends LINUX_2_6
- bool "Strip unnecessary exports from the kernel image"
- help
- Reduces kernel size by stripping unused kernel exports from the kernel image
- Note that this might make the kernel incompatible with any kernel modules that
- were not selected at the time the kernel image was created
-
-comment "Package build options"
-
-config DEBUG
+config MODULES
+ option modules
bool
- prompt "Compile packages with debugging info"
- default n
- help
- Adds -g3 to the CFLAGS
-
-config DEBUG_DIR
- bool "Install debugging binaries into a staging directory"
- default n
- help
- This will install all compiled package binaries into build_dir/target-*/debug-*/,
- useful for cross-debugging via gdb/gdbserver
-
-config IPV6
- bool
- prompt "Enable IPv6 support in packages"
- default n
- help
- Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
-
-comment "Kernel build options"
-
-config KERNEL_KALLSYMS
- bool "Compile the kernel with symbol table information"
- default n
- help
- This will give you more information in stack traces from kernel oopses
-
-config KERNEL_PROFILING
- bool "Compile the kernel with profiling enabled"
- default n
- help
- Enable the extended profiling support mechanisms used by profilers such
- as OProfile.
-
-config KERNEL_DEBUG_FS
- bool "Compile the kernel with Debug Filesystem enabled"
- depends LINUX_2_6
default y
- help
- debugfs is a virtual file system that kernel developers use to put
- debugging files into. Enable this option to be able to read and
- write to these files.
-
-endmenu
-
-menuconfig DEVEL
- bool "Advanced configuration options (for developers)"
- default n
-
-config BROKEN
- bool
- prompt "Show broken platforms / packages" if DEVEL
- default n
-
-config DOWNLOAD_FOLDER
- string
- prompt "Download folder" if DEVEL
- default ""
-config LOCALMIRROR
- string
- prompt "Local mirror for source packages" if DEVEL
-
-config AUTOREBUILD
+config HAVE_DOT_CONFIG
bool
- prompt "Automatic rebuild of packages" if DEVEL
default y
- help
- Automatically rebuild packages when their files change
-
-config BUILD_SUFFIX
- string
- prompt "Build suffix to append to the BUILD_DIR variable" if DEVEL
- default ""
- help
- Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix
-
-config TARGET_ROOTFS_DIR
- string
- prompt "Override the default TARGET_ROOTFS_DIR variable" if DEVEL
- default ""
- help
- Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path.
- Use this option to re-define the location of the target root file system directory.
-
-config CCACHE
- bool
- prompt "Use ccache" if DEVEL
- default n
- help
- Compiler cache; see http://ccache.samba.org/
-
-config EXTERNAL_KERNEL_TREE
- string
- prompt "Use external kernel tree" if DEVEL
- default ""
-
-config KERNEL_GIT_CLONE_URI
- string
- prompt "Enter git repository to clone" if DEVEL
- default ""
- help
- Enter the full git repository path i.e.:
- git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
- This will create a git clone of the kernel in your build
- directory.
-
-config KERNEL_GIT_LOCAL_REPOSITORY
- string
- prompt "Enter path to local reference repository" if DEVEL
- default ""
- help
- Enter a full pathname to a local reference git repository.
- In this instance, the --refererence option of git clone will
- be used thus creating a quick local clone of your repo.
+source "target/Config.in"
-menuconfig TARGET_OPTIONS
- bool "Target Options" if DEVEL
-
-config TARGET_OPTIMIZATION
- string
- prompt "Target Optimizations" if TARGET_OPTIONS
- default DEFAULT_TARGET_OPTIMIZATION
- help
- Optimizations to use when building for the target host.
-
-config SOFT_FLOAT
- bool
- prompt "Use software floating point by default" if TARGET_OPTIONS
- default y
- depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU
- help
- If your target CPU does not have a Floating Point Unit (FPU) or a
- kernel FPU emulator, but you still wish to support floating point
- functions, then everything will need to be compiled with soft floating
- point support (-msoft-float).
+source "config/Config-images.in"
- Most people will answer N.
+source "config/Config-build.in"
+source "config/Config-devel.in"
source "toolchain/Config.in"
source "target/imagebuilder/Config.in"
+
source "target/sdk/Config.in"
+
source "target/toolchain/Config.in"
source "tmp/.config-package.in"
-
-
projects / openwrt / openwrt.git / blobdiff