ubox: fix possible address alignment issue

[openwrt/openwrt.git] / README

diff --git a/README b/README
index 6d2b27fb3e8a5660344f4232c78dcd96e9a7cd3f..405c18bac06b1d9a7b119d1cbe32cccb2f434e24 100644 (file)
--- a/README
+++ b/README
@@ -1,14 +1,15 @@
-This is the buildsystem for the OpenWrt Linux distribution.
+This is the buildsystem for the LEDE Linux distribution.
 
-Please use "make menuconfig" to configure your appreciated
+Please use "make menuconfig" to choose your preferred
 configuration for the toolchain and firmware.
 
-You need to have installed gcc, binutils, patch, bzip2, flex,
-make, gettext, pkg-config, unzip, libz-dev and libc headers.
+You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
+find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.
 
-Run "./scripts/feeds update" to get the latest package definitions
+Run "./scripts/feeds update -a" to get all the latest package definitions
 defined in feeds.conf / feeds.conf.default respectively
-and "./scripts/feeds install" to install symlinks into "package/feeds/*".
+and "./scripts/feeds install -a" to install symlinks of all of them into
+package/feeds/.
 
 Use "make menuconfig" to configure your image.
 
@@ -16,19 +17,13 @@ Simply running "make" will build your firmware.
 It will download all sources, build the cross-compile toolchain, 
 the kernel and all choosen applications.
 
-You can use "scripts/flashing/flash.sh" for remotely updating your embedded
-system via tftp.
-
-The OpenWrt system is documented in docs/. You will need a LaTeX distribution
-and the tex4ht package to build the documentation. Type "make -C docs/" to build it.
-
 To build your own firmware you need to have access to a Linux, BSD or MacOSX system
 (case-sensitive filesystem required). Cygwin will not be supported because of
 the lack of case sensitiveness in the file system.
 
 
 Sunshine!
-       Your OpenWrt Project
-       http://openwrt.org
+       Your LEDE Community
+       http://www.lede-project.org