cosmetic fix for docs/ prereq check

[openwrt/openwrt.git] / docs / build.tex

diff --git a/docs/build.tex b/docs/build.tex
index 730451ede65ee8a8fd139b56919eea2f81d51f7e..54d31c582b5c1b3e01aa23c206f8404eb566b529 100644 (file)
--- a/docs/build.tex
+++ b/docs/build.tex
@@ -65,25 +65,25 @@ There are four key directories in the base:
 
 \texttt{tools} and \texttt{toolchain} refer to common tools which will be
 used to build the firmware image, the compiler, and the C library.
-The result of this is three new directories, \texttt{tool\_build}, which is a temporary
-directory for building the target independent tools, \texttt{toolchain\_build\_\textit{<arch>}}
+The result of this is three new directories, \texttt{build\_dir/host}, which is a temporary
+directory for building the target independent tools, \texttt{build\_dir/toolchain-\textit{<arch>}*}
 which is used for building the toolchain for a specific architecture, and
-\texttt{staging\_dir\_\textit{<arch>}} where the resulting toolchain is installed.
+\texttt{staging\_dir/toolchain-\textit{<arch>}*} where the resulting toolchain is installed.
 You will not need to do anything with the toolchain directory unless you intend to
 add a new version of one of the components above.
 
 \begin{itemize}
-    \item \texttt{tool\_build}
-    \item \texttt{toolchain\_build\_\textit{<arch>}}
+    \item \texttt{build\_dir/host}
+    \item \texttt{build\_dir/toolchain-\textit{<arch>}*}
 \end{itemize}
 
 \texttt{package} is for exactly that -- packages. In an OpenWrt firmware, almost everything
 is an \texttt{.ipk}, a software package which can be added to the firmware to provide new
 features or removed to save space. Note that packages are also maintained outside of the main
-trunk and can be obtained from subversion at the following location:
+trunk and can be obtained from subversion using the package feeds system:
 
 \begin{Verbatim}
-$ svn checkout https://svn.openwrt.org/openwrt/packages packages
+$ ./scripts/feeds update
 \end{Verbatim}
 
 Those packages can be used to extend the functionality of the build system and need to be
@@ -91,15 +91,17 @@ symlinked into the main trunk. Once you do that, the packages will show up in th
 configuration. From kamikaze you would do something like this:
 
 \begin{Verbatim}
-$ ls
-kamikaze  packages
-$ ln -s packages/net/nmap kamikaze/package/nmap
+$ ./scripts/feeds search nmap
+Search results in feed 'packages':
+nmap       Network exploration and/or security auditing utility
+
+$ ./scripts/feeds install nmap
 \end{Verbatim}
 
 To include all packages, issue the following command:
 
 \begin{Verbatim}
-$ ln -s packages/*/* kamikaze/package/
+$ make package/symlinks
 \end{Verbatim}
 
 \texttt{target} refers to the embedded platform, this contains items which are specific to
@@ -108,12 +110,12 @@ directory which is broken down by platform \textit{<arch>} and contains the patc
 kernel, profile config, for a particular platform. There's also the "\texttt{target/image}" directory
 which describes how to package a firmware for a specific platform.
 
-Both the target and package steps will use the directory "\texttt{build\_\textit{<arch>}}"
+Both the target and package steps will use the directory "\texttt{build\_dir/\textit{<arch>}}"
 as a temporary directory for compiling. Additionally, anything downloaded by the toolchain,
 target or package steps will be placed in the "\texttt{dl}" directory.
 
 \begin{itemize}
-    \item \texttt{build\_\textit{<arch>}}
+    \item \texttt{build\_dir/\textit{<arch>}}
     \item \texttt{dl}
 \end{itemize}
 
@@ -171,7 +173,7 @@ of noise caused by the compile output. To see the full output, run the command
 "\texttt{make V=99}".
 
 During the build process, buildroot will download all sources to the "\texttt{dl}"
-directory and will start patching and compiling them in the "\texttt{build\_\textit{<arch>}}"
+directory and will start patching and compiling them in the "\texttt{build\_dir/\textit{<arch>}}"
 directory. When finished, the resulting firmware will be in the "\texttt{bin}" directory
 and packages will be in the "\texttt{bin/packages}" directory.
 
@@ -461,14 +463,14 @@ shortcuts you can take. Instead of waiting for make to get to your package, you
 run one of the following:
 
 \begin{itemize}
-    \item \texttt{make package/\textit{<name>}-clean V=99}
-    \item \texttt{make package/\textit{<name>}-install V=99}
+    \item \texttt{make package/\textit{<name>}/clean V=99}
+    \item \texttt{make package/\textit{<name>}/install V=99}
 \end{itemize}
 
-Another nice trick is that if the source directory under \texttt{build\_\textit{<arch>}}
+Another nice trick is that if the source directory under \texttt{build\_dir/\textit{<arch>}}
 is newer than the package directory, it won't clobber it by unpacking the sources again.
 If you were working on a patch you could simply edit the sources under the
-\texttt{build\_\textit{<arch>}/\textit{<source>}} directory and run the install command above,
+\texttt{build\_dir/\textit{<arch>}/\textit{<source>}} directory and run the install command above,
 when satisfied, copy the patched sources elsewhere and diff them with the unpatched
 sources. A warning though - if you go modify anything under \texttt{package/\textit{<name>}}
 it will remove the old sources and unpack a fresh copy.
@@ -476,8 +478,8 @@ it will remove the old sources and unpack a fresh copy.
 Other useful targets include:
 
 \begin{itemize}
-    \item \texttt{make package/\textit{<name>}-prepare V=99}
-    \item \texttt{make package/\textit{<name>}-compile V=99}
-    \item \texttt{make package/\textit{<name>}-configure V=99}
+    \item \texttt{make package/\textit{<name>}/prepare V=99}
+    \item \texttt{make package/\textit{<name>}/compile V=99}
+    \item \texttt{make package/\textit{<name>}/configure V=99}
 \end{itemize}