. /usr/share/libubox/jshn.sh
[ -f $CFG ] || exit 1
+[ -f /etc/config/network -a -f /etc/config/system ] && exit 0
generate_static_network() {
uci -q batch <<-EOF
json_get_vars type annex firmware tone xfer_mode
uci -q batch <<-EOF
delete network.dsl
- set network.dsl='$type'
+ set network.dsl='dsl'
set network.dsl.annex='$annex'
set network.dsl.firmware='$firmware'
set network.dsl.tone='$tone'
addr_offset=2
generate_network() {
- local ifname macaddr protocol type
+ local ifname macaddr protocol type ipaddr netmask
json_select network
json_select "$1"
- json_get_vars ifname macaddr protocol
+ json_get_vars ifname macaddr protocol ipaddr netmask
json_select ..
json_select ..
set network.$1.type='$type'
set network.$1.ifname='$ifname'
set network.$1.proto='none'
- set network.$1.macaddr='$macaddr'
+ EOF
+
+ [ -n "$macaddr" ] && uci -q batch <<-EOF
+ delete network.$1_dev
+ set network.$1_dev='device'
+ set network.$1_dev.name='$ifname'
+ set network.$1_dev.macaddr='$macaddr'
EOF
case "$protocol" in
static)
- local ipaddr
+ local ipad
case "$1" in
- lan) ipaddr="192.168.1.1" ;;
- *) ipaddr="192.168.$((addr_offset++)).1" ;;
+ lan) ipad=${ipaddr:-"192.168.1.1"} ;;
+ *) ipad=${ipaddr:-"192.168.$((addr_offset++)).1"} ;;
esac
+ netm=${netmask:-"255.255.255.0"}
+
uci -q batch <<-EOF
set network.$1.proto='static'
- set network.$1.ipaddr='$ipaddr'
- set network.$1.netmask='255.255.255.0'
+ set network.$1.ipaddr='$ipad'
+ set network.$1.netmask='$netm'
set network.$1.ip6assign='60'
EOF
;;
# autogenerate vlans
#
- json_get_keys roles roles
- json_select roles
+ if json_is_a roles array; then
+ json_get_keys roles roles
+ json_select roles
- for role in $roles; do
- json_select "$role"
- json_get_vars ports
- json_select ..
+ for role in $roles; do
+ json_select "$role"
+ json_get_vars ports
+ json_select ..
- uci -q batch <<-EOF
- add network switch_vlan
- set network.@switch_vlan[-1].device='$switch'
- set network.@switch_vlan[-1].vlan='$role'
- set network.@switch_vlan[-1].ports='$ports'
- EOF
- done
+ uci -q batch <<-EOF
+ add network switch_vlan
+ set network.@switch_vlan[-1].device='$switch'
+ set network.@switch_vlan[-1].vlan='$role'
+ set network.@switch_vlan[-1].ports='$ports'
+ EOF
+ done
- json_select ..
+ json_select ..
+ fi
#
# write port specific settings
#
- json_get_keys ports ports
- json_select ports
+ if json_is_a ports array; then
+ json_get_keys ports ports
+ json_select ports
+
+ for port in $ports; do
+ json_select "$port"
+ json_get_vars num
+
+ if json_is_a attr object; then
+ json_get_keys attr attr
+ json_select attr
+ uci -q batch <<-EOF
+ add network switch_port
+ set network.@switch_port[-1].device='$switch'
+ set network.@switch_port[-1].port=$num
+ EOF
+
+ for attr in $attr; do
+ json_get_var val "$attr"
+ uci -q set network.@switch_port[-1].$attr="$val"
+ done
+ json_select ..
+ fi
+ json_select ..
+ done
- for port in $ports; do
- json_select "$port"
- json_get_vars num
-
- if json_is_a attr object; then
- json_get_keys attr attr
- json_select attr
- uci -q batch <<-EOF
- add network switch_port
- set network.@switch_port[-1].device='$switch'
- set network.@switch_port[-1].port=$num
- EOF
-
- for attr in $attr; do
- json_get_var val "$attr"
- uci -q set network.@switch_port[-1].$attr="$val"
- done
- json_select ..
- fi
json_select ..
- done
-
- json_select ..
+ fi
}
generate_switch() {
json_select ..
}
+
+generate_static_system() {
+ uci -q batch <<-EOF
+ delete system.@system[0]
+ add system system
+ set system.@system[-1].hostname='lede'
+ set system.@system[-1].timezone='UTC'
+ set system.@system[-1].ttylogin='0'
+ set system.@system[-1].log_size='64'
+ set system.@system[-1].urandom_seed='0'
+
+ delete system.ntp
+ set system.ntp='timeserver'
+ set system.ntp.enabled='1'
+ set system.ntp.enable_server='0'
+ add_list system.ntp.server='0.lede.pool.ntp.org'
+ add_list system.ntp.server='1.lede.pool.ntp.org'
+ add_list system.ntp.server='2.lede.pool.ntp.org'
+ add_list system.ntp.server='3.lede.pool.ntp.org'
+ EOF
+
+ if json_is_a system object; then
+ json_select system
+ local hostname
+ if json_get_var hostname hostname; then
+ uci -q set "system.@system[-1].hostname=$hostname"
+ fi
+
+ if json_is_a ntpserver array; then
+ local keys key
+ json_get_keys keys ntpserver
+ json_select ntpserver
+ uci -q delete "system.ntp.server"
+
+ for key in $keys; do
+ local server
+ if json_get_var server "$key"; then
+ uci -q add_list "system.ntp.server=$server"
+ fi
+ done
+ json_select ..
+ fi
+ json_select ..
+ fi
+}
+
generate_rssimon() {
local key="$1"
local cfg="rssid_$key"
;;
netdev)
- local device
- json_get_vars device
+ local device mode
+ json_get_vars device mode
uci -q batch <<-EOF
set system.$cfg.trigger='netdev'
- set system.$cfg.mode='link tx rx'
+ set system.$cfg.mode='$mode'
set system.$cfg.dev='$device'
EOF
;;
;;
switch)
- local port_mask
- json_get_vars port_mask
+ local port_mask speed_mask
+ json_get_vars port_mask speed_mask
uci -q batch <<-EOF
set system.$cfg.port_mask='$port_mask'
+ set system.$cfg.speed_mask='$speed_mask'
EOF
;;
- timer)
+ portstate)
+ local port_state
+ json_get_vars port_state
+ uci -q batch <<-EOF
+ set system.$cfg.port_state='$port_state'
+ EOF
+ ;;
+
+ timer|oneshot)
local delayon delayoff
json_get_vars delayon delayoff
uci -q batch <<-EOF
- set system.$cfg.trigger='timer'
+ set system.$cfg.trigger='$type'
set system.$cfg.delayon='$delayon'
set system.$cfg.delayoff='$delayoff'
EOF
json_select ..
}
+generate_gpioswitch() {
+ local cfg="$1"
+
+ json_select gpioswitch
+ json_select "$cfg"
+ local name pin default
+ json_get_vars name pin default
+ uci -q batch <<-EOF
+ delete system.$cfg
+ set system.$cfg='gpio_switch'
+ set system.$cfg.name='$name'
+ set system.$cfg.gpio_pin='$pin'
+ set system.$cfg.default='$default'
+ EOF
+ json_select ..
+ json_select ..
+}
+
json_init
json_load "$(cat ${CFG})"
-generate_static_network
+if [ ! -f /etc/config/network ]; then
+ touch /etc/config/network
+ generate_static_network
+
+ json_get_keys keys network
+ for key in $keys; do generate_network $key; done
-json_get_keys keys network
-for key in $keys; do generate_network $key; done
+ json_get_keys keys switch
+ for key in $keys; do generate_switch $key; done
+fi
-json_get_keys keys switch
-for key in $keys; do generate_switch $key; done
+if [ ! -f /etc/config/system ]; then
+ touch /etc/config/system
+ generate_static_system
-json_get_keys keys rssimon
-for key in $keys; do generate_rssimon $key; done
+ json_get_keys keys rssimon
+ for key in $keys; do generate_rssimon $key; done
-json_get_keys keys led
-for key in $keys; do generate_led $key; done
+ json_get_keys keys gpioswitch
+ for key in $keys; do generate_gpioswitch $key; done
+ json_get_keys keys led
+ for key in $keys; do generate_led $key; done
+fi
uci commit
projects / openwrt / openwrt.git / blobdiff