broadcom-wl: check iface pid file when invoking nas, fixes starting nas for additiona...

[openwrt/openwrt.git] / package / broadcom-wl / files / lib / wifi / broadcom.sh

diff --git a/package/broadcom-wl/files/lib/wifi/broadcom.sh b/package/broadcom-wl/files/lib/wifi/broadcom.sh
index 998a2f58ff7dd00588d63b4040359e2bb2d66f8b..976665cb0b4ef777c4890efb6334f35e4066dc8f 100644 (file)
--- a/package/broadcom-wl/files/lib/wifi/broadcom.sh
+++ b/package/broadcom-wl/files/lib/wifi/broadcom.sh
@@ -42,7 +42,7 @@ scan_broadcom() {
 
        local _c=
        for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do
-               config_set "$vif" ifname "wl0${_c:+.$_c}"
+               config_set "$vif" ifname "${device}${_c:+.$_c}"
                _c=$((${_c:-0} + 1))
        done
        config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}"
@@ -93,13 +93,14 @@ scan_broadcom() {
 }
 
 disable_broadcom() {
-       set_wifi_down "$1"
-       wlc down
+       local device="$1"
+       set_wifi_down "$device"
+       wlc ifname "$device" down
        (
                include /lib/network
 
                # make sure the interfaces are down and removed from all bridges
-               for dev in wl0 wl0.1 wl0.2 wl0.3; do
+               for dev in $device ${device}.1 ${device}.2 ${device}.3; do
                        ifconfig "$dev" down 2>/dev/null >/dev/null && {
                                unbridge "$dev"
                        }
@@ -109,6 +110,7 @@ disable_broadcom() {
 }
 
 enable_broadcom() {
+       local device="$1"
        local _c
        config_get channel "$device" channel
        config_get country "$device" country
@@ -124,7 +126,12 @@ enable_broadcom() {
        config_get maclist "$device" maclist
        config_get macaddr "$device" macaddr
        config_get txpower "$device" txpower
+       config_get frag "$device" frag
+       config_get rts "$device" rts
+       config_get hwmode "$device" hwmode
        local vif_pre_up vif_post_up vif_do_up vif_txpower
+       local doth=0
+       local wmm=0
 
        _c=0
        nas="$(which nas)"
@@ -139,7 +146,7 @@ enable_broadcom() {
        } || {
                slottime="${slottime:--1}"
        }
-       
+
        case "$macfilter" in
                allow|2)
                        macfilter=2;
@@ -152,6 +159,15 @@ enable_broadcom() {
                ;;
        esac
 
+       case "$hwmode" in
+               *b)   hwmode=0;;
+               *bg)  hwmode=1;;
+               *g)   hwmode=2;;
+               *gst) hwmode=4;;
+               *lrs) hwmode=5;;
+               *)    hwmode=1;;
+       esac
+
        for vif in $vifs; do
                config_get vif_txpower "$vif" txpower
 
@@ -159,7 +175,10 @@ enable_broadcom() {
                append vif_pre_up "vif $_c" "$N"
                append vif_post_up "vif $_c" "$N"
                append vif_do_up "vif $_c" "$N"
-               
+
+               config_get_bool wmm "$vif" wmm "$wmm"
+               config_get_bool doth "$vif" doth "$doth"
+
                [ "$mode" = "sta" ] || {
                        config_get_bool hidden "$vif" hidden 0
                        append vif_pre_up "closed $hidden" "$N"
@@ -174,11 +193,15 @@ enable_broadcom() {
                nasopts=
                config_get enc "$vif" encryption
                case "$enc" in
-                       WEP|wep)
+                       *WEP*|*wep*)
                                wsec_r=1
                                wsec=1
                                defkey=1
                                config_get key "$vif" key
+                               case "$enc" in
+                                       *shared*) append vif_do_up "wepauth 1" "$N";;
+                                       *) append vif_do_up "wepauth 0" "$N";;
+                               esac
                                case "$key" in
                                        [1234])
                                                defkey="$key"
@@ -199,6 +222,7 @@ enable_broadcom() {
                                case "$enc" in
                                        wpa*+wpa2*|WPA*+WPA2*|*psk+*psk2|*PSK+*PSK2) auth=132; wsec=6;;
                                        wpa2*|WPA2*|*PSK2|*psk2) auth=128; wsec=4;;
+                                       *aes|*AES) auth=4; wsec=4;;
                                        *) auth=4; wsec=2;;
                                esac
                                eval "${vif}_key=\"\$key\""
@@ -223,7 +247,7 @@ enable_broadcom() {
                append vif_do_up "wpa_auth $auth" "$N"
                append vif_do_up "wsec_restrict $wsec_r" "$N"
                append vif_do_up "eap_restrict $eap_r" "$N"
-               
+
                config_get ssid "$vif" ssid
                append vif_post_up "vlan_mode 0" "$N"
                append vif_post_up "ssid $ssid" "$N"
@@ -241,9 +265,9 @@ enable_broadcom() {
                                append vif_pre_up "allow_mode 1" "$N"
                        }
                } || append vif_pre_up "allow_mode 0" "$N"
-               
+
                append vif_post_up "enabled 1" "$N"
-               
+
                config_get ifname "$vif" ifname
                #append if_up "ifconfig $ifname up" ";$N"
 
@@ -263,27 +287,33 @@ enable_broadcom() {
                                [ -z "$bridge" ] || {
                                        append vif_post_up "supplicant 1" "$N"
                                        append vif_post_up "passphrase $key" "$N"
-                                       
+
                                        use_nas=0
                                }
                        }
-                       [ -z "$nas" -o "$use_nas" = "0" ] || nas_cmd="${nas_cmd:+$nas_cmd$N}$nas -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts &"
+                       [ -z "$nas" -o "$use_nas" = "0" ] || {
+                               nas_cmd="${nas_cmd:+$nas_cmd$N}start-stop-daemon -S -b -p /var/run/nas.$ifname.pid -x $nas -- -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts"
+                       }
                }
                _c=$(($_c + 1))
        done
        killall -KILL nas >&- 2>&-
-       wlc stdin <<EOF
+       wlc ifname "$device" stdin <<EOF
 $ifdown
 
+gmode ${hwmode:-1}
+apsta $apsta
 ap $ap
 ${mssid:+mssid $mssid}
-apsta $apsta
 infra $infra
 ${wet:+wet 1}
 802.11d 0
-802.11h 0
+802.11h ${doth:-0}
+wme ${wmm:-0}
 rxant ${rxantenna:-3}
 txant ${txantenna:-3}
+fragthresh ${frag:-2346}
+rtsthresh ${rts:-2347}
 monitor ${monitor:-0}
 passive ${passive:-0}
 
@@ -303,7 +333,7 @@ up
 $vif_post_up
 EOF
        eval "$if_up"
-       wlc stdin <<EOF
+       wlc ifname "$device" stdin <<EOF
 $vif_do_up
 EOF
 
@@ -317,11 +347,13 @@ EOF
 
 
 detect_broadcom() {
-       [ -f /proc/net/wl0 ] || return
-       config_get type wl0 type
-       [ "$type" = broadcom ] && return
-       cat <<EOF
-config wifi-device  wl0
+       local i=-1
+
+       while [ -f /proc/net/wl$((++i)) ]; do
+               config_get type wl${i} type
+               [ "$type" = broadcom ] && continue
+               cat <<EOF
+config wifi-device  wl${i}
        option type     broadcom
        option channel  5
 
@@ -329,10 +361,12 @@ config wifi-device  wl0
        option disabled 1
 
 config wifi-iface
-       option device   wl0
+       option device   wl${i}
        option network  lan
        option mode     ap
-       option ssid     OpenWrt
+       option ssid     OpenWrt${i#0}
        option encryption none
+
 EOF
+       done
 }