define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +LINUX_4_4:kmod-regmap
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +!LINUX_3_18:kmod-regmap +LINUX_4_14:kmod-crypto-ecdh
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BT_HCIUART_BCM=n \
CONFIG_BT_HCIUART_INTEL=n \
CONFIG_BT_HCIUART_H4 \
+ CONFIG_BT_HCIUART_NOKIA=n \
CONFIG_BT_HIDP \
CONFIG_HID_SUPPORT=y
$(call AddDepends/rfkill)
$(eval $(call KernelPackage,bluetooth_6lowpan))
+define KernelPackage/btmrvl
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell Bluetooth Kernel Module support
+ DEPENDS:=+kmod-mmc +kmod-bluetooth +mwifiex-sdio-firmware
+ KCONFIG:= \
+ CONFIG_BT_MRVL \
+ CONFIG_BT_MRVL_SDIO
+ $(call AddDepends/bluetooth)
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/btmrvl.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btmrvl_sdio.ko
+ AUTOLOAD:=$(call AutoProbe,btmrvl btmrvl_sdio)
+endef
+
+define KernelPackage/btmrvl/description
+ Kernel support for Marvell SDIO Bluetooth Module
+endef
+
+$(eval $(call KernelPackage,btmrvl))
+
+
define KernelPackage/dma-buf
SUBMENU:=$(OTHER_MENU)
TITLE:=DMA shared buffer support
$(eval $(call KernelPackage,dma-buf))
+define KernelPackage/nvmem
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Non Volatile Memory support
+ KCONFIG:=CONFIG_NVMEM
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/nvmem/nvmem_core.ko@ge4.9
+endef
+
+define KernelPackage/nvmem/description
+ Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES, etc.
+endef
+
+$(eval $(call KernelPackage,nvmem))
+
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
- DEPENDS:=+kmod-i2c-core
+ DEPENDS:=+kmod-i2c-core +kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
AUTOLOAD:=$(call AutoProbe,at24)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
+ DEPENDS:=+kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
AUTOLOAD:=$(call AutoProbe,at25)
endef
define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP 74HC164 GPIO expander support
- KCONFIG:=CONFIG_GPIO_NXP_74HC164
- FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
- AUTOLOAD:=$(call AutoProbe,nxp_74hc164)
+ KCONFIG:=CONFIG_GPIO_74X164
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-74x164.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-74x164)
endef
define KernelPackage/gpio-nxp-74hc164/description
$(eval $(call KernelPackage,gpio-pcf857x))
-define KernelPackage/iio-core
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Industrial IO core
- KCONFIG:= \
- CONFIG_IIO \
- CONFIG_IIO_BUFFER=y \
- CONFIG_IIO_KFIFO_BUF \
- CONFIG_IIO_TRIGGER=y \
- CONFIG_IIO_TRIGGERED_BUFFER
- FILES:= \
- $(LINUX_DIR)/drivers/iio/industrialio.ko \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko@lt4.4) \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko@ge4.4) \
- $(LINUX_DIR)/drivers/iio/kfifo_buf.ko@lt4.4 \
- $(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko@ge4.4
- AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
-endef
-
-define KernelPackage/iio-core/description
- The industrial I/O subsystem provides a unified framework for
- drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc)
-endef
-$(eval $(call KernelPackage,iio-core))
-
-
-define KernelPackage/iio-ad799x
+define KernelPackage/ppdev
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=kmod-i2c-core kmod-iio-core
- TITLE:=Analog Devices AD799x ADC driver
+ TITLE:=Parallel port support
KCONFIG:= \
- CONFIG_AD799X_RING_BUFFER=y \
- CONFIG_AD799X
- FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
- AUTOLOAD:=$(call AutoLoad,56,ad799x)
-endef
-
-define KernelPackage/iio-ad799x/description
- support for Analog Devices:
- ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
- i2c analog to digital converters (ADC).
+ CONFIG_PARPORT \
+ CONFIG_PPDEV
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport.ko \
+ $(LINUX_DIR)/drivers/char/ppdev.ko
+ AUTOLOAD:=$(call AutoLoad,50,parport ppdev)
endef
-$(eval $(call KernelPackage,iio-ad799x))
+$(eval $(call KernelPackage,ppdev))
-define KernelPackage/iio-dht11
+define KernelPackage/parport-pc
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
- TITLE:=DHT11 (and compatible) humidity and temperature sensors
+ TITLE:=Parallel port interface (PC-style) support
+ DEPENDS:=+kmod-ppdev
KCONFIG:= \
- CONFIG_DHT11
- FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
- AUTOLOAD:=$(call AutoLoad,56,dht11)
-endef
-
-define KernelPackage/iio-dht11/description
- support for DHT11 and DHT22 digitial humidity and temperature sensors
- attached at GPIO lines. You will need a custom device tree file to
- specify the GPIO line to use.
+ CONFIG_KS0108=n \
+ CONFIG_PARPORT_PC \
+ CONFIG_PARPORT_1284=y \
+ CONFIG_PARPORT_PC_FIFO=y \
+ CONFIG_PARPORT_PC_PCMCIA=n \
+ CONFIG_PARPORT_PC_SUPERIO=y \
+ CONFIG_PARPORT_SERIAL=n \
+ CONFIG_PARIDE=n \
+ CONFIG_SCSI_IMM=n \
+ CONFIG_SCSI_PPA=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport_pc.ko
+ AUTOLOAD:=$(call AutoLoad,51,parport_pc)
endef
-$(eval $(call KernelPackage,iio-dht11))
+$(eval $(call KernelPackage,parport-pc))
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
- TITLE:=Parallel port and line printer support
+ TITLE:=Parallel port line printer device support
+ DEPENDS:=+kmod-ppdev
KCONFIG:= \
- CONFIG_PARPORT \
- CONFIG_PRINTER \
- CONFIG_PPDEV
+ CONFIG_PRINTER
FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.ko \
- $(LINUX_DIR)/drivers/char/lp.ko \
- $(LINUX_DIR)/drivers/char/ppdev.ko
- AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
+ $(LINUX_DIR)/drivers/char/lp.ko
+ AUTOLOAD:=$(call AutoLoad,52,lp)
endef
$(eval $(call KernelPackage,lp))
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
+ DEPENDS:=@!TARGET_uml
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko@lt4.10 \
+ $(LINUX_DIR)/drivers/mmc/core/mmc_block.ko@ge4.10
AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef
define KernelPackage/rtc-ds1307
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core +LINUX_4_14:kmod-regmap
KCONFIG:=CONFIG_RTC_DRV_DS1307 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
define KernelPackage/rtc-ds1374
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1374 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_DS1374 \
CONFIG_RTC_DRV_DS1374_WDT=n \
CONFIG_RTC_CLASS=y
define KernelPackage/rtc-ds1672
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1672 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_DS1672 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko
define KernelPackage/rtc-isl1208
SUBMENU:=$(OTHER_MENU)
TITLE:=Intersil ISL1208 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_ISL1208 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_PCF8563 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
define KernelPackage/rtc-pcf2123
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
- DEPENDS:=@RTC_SUPPORT
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
define KernelPackage/rtc-pt7c4338
SUBMENU:=$(OTHER_MENU)
TITLE:=Pericom PT7C4338 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
define KernelPackage/rtc-rs5c372a
SUBMENU:=$(OTHER_MENU)
TITLE:=Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_RS5C372 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rs5c372.ko
$(eval $(call KernelPackage,mtdtests))
+define KernelPackage/mtdoops
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Log panic/oops to an MTD buffer
+ KCONFIG:=CONFIG_MTD_OOPS
+ FILES:=$(LINUX_DIR)/drivers/mtd/mtdoops.ko
+endef
+
+define KernelPackage/mtdoops/description
+ Kernel modules for Log panic/oops to an MTD buffer
+endef
+
+$(eval $(call KernelPackage,mtdoops))
+
+
+define KernelPackage/mtdram
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Test MTD driver using RAM
+ KCONFIG:=CONFIG_MTD_MTDRAM \
+ CONFIG_MTDRAM_TOTAL_SIZE=4096 \
+ CONFIG_MTDRAM_ERASE_SIZE=128
+ FILES:=$(LINUX_DIR)/drivers/mtd/devices/mtdram.ko
+endef
+
+define KernelPackage/mtdram/description
+ Test MTD driver using RAM
+endef
+
+$(eval $(call KernelPackage,mtdram))
+
+
define KernelPackage/serial-8250
SUBMENU:=$(OTHER_MENU)
TITLE:=8250 UARTs
KCONFIG:= CONFIG_SERIAL_8250 \
+ CONFIG_SERIAL_8250_PCI \
CONFIG_SERIAL_8250_NR_UARTS=16 \
- CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
- CONFIG_SERIAL_8250_EXTENDED=y \
- CONFIG_SERIAL_8250_MANY_PORTS=y \
+ CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
+ CONFIG_SERIAL_8250_EXTENDED=y \
+ CONFIG_SERIAL_8250_MANY_PORTS=y \
CONFIG_SERIAL_8250_SHARE_IRQ=y \
CONFIG_SERIAL_8250_DETECT_IRQ=n \
CONFIG_SERIAL_8250_RSA=n
FILES:= \
$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
- $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko@ge4.4
+ $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko@ge4.4 \
+ $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko@ge4.4)
+ AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_pci)
endef
define KernelPackage/serial-8250/description
CONFIG_ZRAM \
CONFIG_ZRAM_DEBUG=n \
CONFIG_PGTABLE_MAPPING=n \
+ CONFIG_ZRAM_WRITEBACK=n \
CONFIG_ZSMALLOC_STAT=n \
CONFIG_ZRAM_LZ4_COMPRESS=y
FILES:= \
endef
$(eval $(call KernelPackage,bmp085-spi))
+
+define KernelPackage/tpm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM Hardware Support
+ KCONFIG:= CONFIG_TCG_TPM
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
+ AUTOLOAD:=$(call AutoLoad,10,tpm,1)
+endef
+
+define KernelPackage/tpm/description
+ This enables TPM Hardware Support.
+endef
+
+$(eval $(call KernelPackage,tpm))
+
+define KernelPackage/tpm-tis
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM TIS 1.2 Interface / TPM 2.0 FIFO Interface
+ DEPENDS:= @TARGET_x86 +kmod-tpm
+ KCONFIG:= CONFIG_TCG_TIS
+ FILES:= \
+ $(LINUX_DIR)/drivers/char/tpm/tpm_tis.ko \
+ $(LINUX_DIR)/drivers/char/tpm/tpm_tis_core.ko
+ AUTOLOAD:=$(call AutoLoad,20,tpm_tis,1)
+endef
+
+define KernelPackage/tpm-tis/description
+ If you have a TPM security chip that is compliant with the
+ TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
+ specification (TPM2.0) say Yes and it will be accessible from
+ within Linux.
+endef
+
+$(eval $(call KernelPackage,tpm-tis))
+
+define KernelPackage/tpm-i2c-atmel
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM I2C Atmel Support
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_ATMEL
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_atmel.ko
+ AUTOLOAD:=$(call AutoLoad,40,tpm_i2c_atmel,1)
+endef
+
+define KernelPackage/tpm-i2c-atmel/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Atmel)
+endef
+
+$(eval $(call KernelPackage,tpm-i2c-atmel))
+
+define KernelPackage/tpm-i2c-infineon
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:= TPM I2C Infineon driver
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_INFINEON
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_infineon.ko
+ AUTOLOAD:= $(call AutoLoad,40,tpm_i2c_infineon,1)
+endef
+
+define KernelPackage/tpm-i2c-infineon/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Infineon)
+endef
+
+$(eval $(call KernelPackage,tpm-i2c-infineon))
+
+
+define KernelPackage/w83627hf-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Winbond 83627HF Watchdog Timer
+ KCONFIG:=CONFIG_W83627HF_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/w83627hf_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,w83627hf-wdt,1)
+endef
+
+define KernelPackage/w83627hf-wdt/description
+ Kernel module for Winbond 83627HF Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,w83627hf-wdt))
+
+
+define KernelPackage/itco-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Intel iTCO Watchdog Timer
+ KCONFIG:=CONFIG_ITCO_WDT \
+ CONFIG_ITCO_VENDOR_SUPPORT=y
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_wdt.ko \
+ $(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_vendor_support.ko
+ AUTOLOAD:=$(call AutoLoad,50,iTCO_vendor_support iTCO_wdt,1)
+endef
+
+define KernelPackage/itco-wdt/description
+ Kernel module for Intel iTCO Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,itco-wdt))
+
+
+define KernelPackage/it87-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ITE IT87 Watchdog Timer
+ KCONFIG:=CONFIG_IT87_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/it87_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
+ MODPARAMS.it87-wdt:= \
+ nogameport=1 \
+ nocir=1
+endef
+
+define KernelPackage/it87-wdt/description
+ Kernel module for ITE IT87 Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,it87-wdt))
projects / openwrt / openwrt.git / blobdiff