#
-# Copyright (C) 2006-2012 OpenWrt.org
+# Copyright (C) 2006-2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
WATCHDOG_DIR:=watchdog
-define KernelPackage/6lowpan-iphc
- USBMENU:=$(OTHER_MENU)
- TITLE:=6lowpan shared code
- DEPENDS:=@!LINUX_3_3 @!LINUX_3_8 @!LINUX_3_10 @!LINUX_3_13
- KCONFIG:=CONFIG_6LOWPAN_IPHC
- HIDDEN:=1
- FILES:=$(LINUX_DIR)/net/ieee802154/6lowpan_iphc.ko
- AUTOLOAD:=$(call Autoprobe,6lowpan_iphc)
+define KernelPackage/6lowpan
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=6LoWPAN shared code
+ KCONFIG:= \
+ CONFIG_6LOWPAN \
+ CONFIG_6LOWPAN_NHC=n
+ FILES:=$(LINUX_DIR)/net/6lowpan/6lowpan.ko
+ AUTOLOAD:=$(call AutoProbe,6lowpan)
endef
-define KernelPackage/6lowpan-iphc/description
+define KernelPackage/6lowpan/description
Shared 6lowpan code for IEEE 802.15.4 and Bluetooth.
endef
-$(eval $(call KernelPackage,6lowpan-iphc))
+$(eval $(call KernelPackage,6lowpan))
+
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +(!LINUX_3_3&&!LINUX_3_8&&!LINUX_3_10&&!LINUX_3_13):kmod-6lowpan-iphc
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +!LINUX_3_18:kmod-regmap
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BLUEZ_HCIUSB \
CONFIG_BLUEZ_HIDP \
CONFIG_BT \
+ CONFIG_BT_BREDR=y \
+ CONFIG_BT_DEBUGFS=n \
CONFIG_BT_L2CAP=y \
+ CONFIG_BT_LE=y \
CONFIG_BT_SCO=y \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
+ CONFIG_BT_HCIBTUSB_BCM=n \
CONFIG_BT_HCIUSB \
CONFIG_BT_HCIUART \
+ CONFIG_BT_HCIUART_BCM=n \
+ CONFIG_BT_HCIUART_INTEL=n \
CONFIG_BT_HCIUART_H4 \
CONFIG_BT_HIDP \
CONFIG_HID_SUPPORT=y
- $(call AddDepends/crc16)
- $(call AddDepends/hid)
$(call AddDepends/rfkill)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
$(LINUX_DIR)/drivers/bluetooth/btusb.ko
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,4.1.0)),1)
+ FILES+= \
+ $(LINUX_DIR)/drivers/bluetooth/btintel.ko
+endif
AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
$(eval $(call KernelPackage,bluetooth))
+define KernelPackage/ath3k
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ATH3K Kernel Module support
+ DEPENDS:=+kmod-bluetooth +ar3k-firmware
+ KCONFIG:= \
+ CONFIG_BT_ATH3K \
+ CONFIG_BT_HCIUART_ATH3K=y
+ $(call AddDepends/bluetooth)
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/ath3k.ko
+ AUTOLOAD:=$(call AutoProbe,ath3k)
+endef
+
+define KernelPackage/ath3k/description
+ Kernel support for ATH3K Module
+endef
+
+$(eval $(call KernelPackage,ath3k))
+
-define KernelPackage/bluetooth-hci-h4p
+define KernelPackage/bluetooth_6lowpan
SUBMENU:=$(OTHER_MENU)
- TITLE:=HCI driver with H4 Nokia extensions
- DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
- KCONFIG:=CONFIG_BT_HCIH4P
- FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
- AUTOLOAD:=$(call AutoProbe,hci_h4p)
+ TITLE:=Bluetooth 6LoWPAN support
+ DEPENDS:=+kmod-6lowpan +kmod-bluetooth
+ KCONFIG:=CONFIG_BT_6LOWPAN
+ FILES:=$(LINUX_DIR)/net/bluetooth/bluetooth_6lowpan.ko
+ AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan)
+endef
+
+define KernelPackage/bluetooth_6lowpan/description
+ Kernel support for 6LoWPAN over Bluetooth Low Energy devices
endef
-define KernelPackage/bluetooth-hci-h4p/description
- HCI driver with H4 Nokia extensions
+$(eval $(call KernelPackage,bluetooth_6lowpan))
+
+
+define KernelPackage/dma-buf
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=DMA shared buffer support
+ HIDDEN:=1
+ KCONFIG:=CONFIG_DMA_SHARED_BUFFER
+ FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
+ AUTOLOAD:=$(call AutoLoad,20,dma-shared-buffer)
+endef
+$(eval $(call KernelPackage,dma-buf))
+
+
+define KernelPackage/nvmem
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Non Volatile Memory support
+ KCONFIG:=CONFIG_NVMEM
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/nvmem/nvmem_core.ko@ge4.9
endef
-$(eval $(call KernelPackage,bluetooth-hci-h4p))
+define KernelPackage/nvmem/description
+ Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES, etc.
+endef
+$(eval $(call KernelPackage,nvmem))
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
- DEPENDS:=+kmod-i2c-core
+ DEPENDS:=+kmod-i2c-core +kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
AUTOLOAD:=$(call AutoProbe,at24)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
+ DEPENDS:=+kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
AUTOLOAD:=$(call AutoProbe,at25)
endef
define KernelPackage/iio-core
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@!LINUX_3_3 @!LINUX_3_6
TITLE:=Industrial IO core
KCONFIG:= \
CONFIG_IIO \
CONFIG_IIO_TRIGGERED_BUFFER
FILES:= \
$(LINUX_DIR)/drivers/iio/industrialio.ko \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko) \
- $(LINUX_DIR)/drivers/iio/kfifo_buf.ko
+ $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko@lt4.4) \
+ $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko@ge4.4) \
+ $(LINUX_DIR)/drivers/iio/kfifo_buf.ko@lt4.4 \
+ $(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko@ge4.4
AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
endef
KCONFIG:= \
CONFIG_AD799X_RING_BUFFER=y \
CONFIG_AD799X
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.16.0)),1)
FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
-else
- FILES:=$(LINUX_DIR)/drivers/staging/iio/adc/ad799x.ko
-endif
AUTOLOAD:=$(call AutoLoad,56,ad799x)
endef
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port and line printer support
- DEPENDS:=@BROKEN
KCONFIG:= \
CONFIG_PARPORT \
CONFIG_PRINTER \
$(LINUX_DIR)/drivers/parport/parport.ko \
$(LINUX_DIR)/drivers/char/lp.ko \
$(LINUX_DIR)/drivers/char/ppdev.ko
- AUTOLOAD:=$(call AutoLoad,50,parport lp)
+ AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
endef
$(eval $(call KernelPackage,lp))
$(LINUX_DIR)/drivers/mmc/host/sdhci.ko \
$(LINUX_DIR)/drivers/mmc/host/sdhci-pltfm.ko
- AUTOLOAD:=$(call AutoProbe,sdhci sdhci-pltfm,1)
+ AUTOLOAD:=$(call AutoProbe,sdhci-pltfm,1)
endef
define KernelPackage/sdhci/description
$(eval $(call KernelPackage,sdhci))
-define KernelPackage/oprofile
- SUBMENU:=$(OTHER_MENU)
- TITLE:=OProfile profiling support
- KCONFIG:=CONFIG_OPROFILE
- FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
- DEPENDS:=@KERNEL_PROFILING
-endef
-
-define KernelPackage/oprofile/description
- Kernel module for support for oprofile system profiling
-endef
-
-$(eval $(call KernelPackage,oprofile))
-
-
define KernelPackage/rfkill
SUBMENU:=$(OTHER_MENU)
TITLE:=RF switch subsystem support
DEPENDS:=@USE_RFKILL +kmod-input-core
KCONFIG:= \
- CONFIG_RFKILL \
+ CONFIG_RFKILL_FULL \
CONFIG_RFKILL_INPUT=y \
- CONFIG_RFKILL_LEDS=y \
- CONFIG_RFKILL_GPIO=y
+ CONFIG_RFKILL_LEDS=y
FILES:= \
$(LINUX_DIR)/net/rfkill/rfkill.ko
AUTOLOAD:=$(call AutoLoad,20,rfkill)
TITLE:=Software watchdog driver
KCONFIG:=CONFIG_SOFT_WATCHDOG
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
- AUTOLOAD:=$(call AutoLoad,50,softdog)
+ AUTOLOAD:=$(call AutoLoad,50,softdog,1)
endef
define KernelPackage/softdog/description
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
$(eval $(call KernelPackage,bcma))
-define KernelPackage/wdt-omap
- SUBMENU:=$(OTHER_MENU)
- TITLE:=OMAP Watchdog timer
- DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
- KCONFIG:=CONFIG_OMAP_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
-endef
-
-define KernelPackage/wdt-omap/description
- Kernel module for TI omap watchdog timer
-endef
-
-$(eval $(call KernelPackage,wdt-omap))
-
-
-define KernelPackage/wdt-orion
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Marvell Orion Watchdog timer
- DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu
- KCONFIG:=CONFIG_ORION_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
-endef
-
-define KernelPackage/wdt-orion/description
- Kernel module for Marvell Orion, Kirkwood and Armada XP/370 watchdog timer
-endef
-
-$(eval $(call KernelPackage,wdt-orion))
-
-
-define KernelPackage/booke-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PowerPC Book-E Watchdog Timer
- DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
- KCONFIG:=CONFIG_BOOKE_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
-endef
-
-define KernelPackage/booke-wdt/description
- Kernel module for PowerPC Book-E Watchdog Timer
-endef
-
-$(eval $(call KernelPackage,booke-wdt))
-
-
-define KernelPackage/pwm
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PWM generic API
- KCONFIG:=CONFIG_GENERIC_PWM
- FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
-endef
-
-define KernelPackage/pwm/description
- Kernel module that implement a generic PWM API
-endef
-
-$(eval $(call KernelPackage,pwm))
-
-
-define KernelPackage/pwm-gpio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PWM over GPIO
- DEPENDS:=+kmod-pwm
- KCONFIG:=CONFIG_GPIO_PWM
- FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
- AUTOLOAD:=$(call AutoProbe,gpio-pwm)
-endef
-
-define KernelPackage/pwm-gpio/description
- Kernel module to models a single-channel PWM device using a timer and a GPIO pin
-endef
-
-$(eval $(call KernelPackage,pwm-gpio))
-
-
define KernelPackage/rtc-ds1307
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
- $(call AddDepends/rtc)
- DEPENDS+=+kmod-i2c-core
- KCONFIG:=CONFIG_RTC_DRV_DS1307
+ DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_DS1307 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
AUTOLOAD:=$(call AutoProbe,rtc-ds1307)
endef
$(eval $(call KernelPackage,rtc-ds1307))
+define KernelPackage/rtc-ds1374
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Dallas/Maxim DS1374 RTC support
+ DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_DS1374 \
+ CONFIG_RTC_DRV_DS1374_WDT=n \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1374.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-ds1374)
+endef
+
+define KernelPackage/rtc-ds1374/description
+ Kernel module for Dallas/Maxim DS1374.
+endef
+
+$(eval $(call KernelPackage,rtc-ds1374))
+
+
define KernelPackage/rtc-ds1672
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1672 RTC support
- $(call AddDepends/rtc)
- DEPENDS+=+kmod-i2c-core
- KCONFIG:=CONFIG_RTC_DRV_DS1672
+ DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_DS1672 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko
AUTOLOAD:=$(call AutoProbe,rtc-ds1672)
endef
define KernelPackage/rtc-isl1208
SUBMENU:=$(OTHER_MENU)
TITLE:=Intersil ISL1208 RTC support
- $(call AddDepends/rtc)
- DEPENDS+=+kmod-i2c-core
- KCONFIG:=CONFIG_RTC_DRV_ISL1208
+ DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_ISL1208 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko
AUTOLOAD:=$(call AutoProbe,rtc-isl1208)
endef
$(eval $(call KernelPackage,rtc-isl1208))
-define KernelPackage/rtc-marvell
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Marvell SoC built-in RTC support
- $(call AddDepends/rtc)
- DEPENDS+=@TARGET_kirkwood||TARGET_orion||TARGET_mvebu
- KCONFIG:=CONFIG_RTC_DRV_MV
- FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
- AUTOLOAD:=$(call AutoProbe,rtc-mv)
-endef
-
-define KernelPackage/rtc-marvell/description
- Kernel module for Marvell SoC built-in RTC.
-endef
-
-$(eval $(call KernelPackage,rtc-marvell))
-
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
- $(call AddDepends/rtc,+kmod-i2c-core)
- KCONFIG:=CONFIG_RTC_DRV_PCF8563
+ DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_PCF8563 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
AUTOLOAD:=$(call AutoProbe,rtc-pcf8563)
endef
define KernelPackage/rtc-pcf2123
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
- $(call AddDepends/rtc)
- KCONFIG:=CONFIG_RTC_DRV_PCF2123
+ DEPENDS:=@RTC_SUPPORT
+ KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
AUTOLOAD:=$(call AutoProbe,rtc-pcf2123)
endef
define KernelPackage/rtc-pt7c4338
SUBMENU:=$(OTHER_MENU)
TITLE:=Pericom PT7C4338 RTC support
- $(call AddDepends/rtc,+kmod-i2c-core)
- KCONFIG:=CONFIG_RTC_DRV_PT7C4338
+ DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
endef
$(eval $(call KernelPackage,rtc-pt7c4338))
+define KernelPackage/rtc-rs5c372a
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A
+ DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_RS5C372 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rs5c372.ko
+ AUTOLOAD:=$(call AutoLoad,50,rtc-rs5c372,1)
+endef
+
+define KernelPackage/rtc-rs5c372a/description
+ Kernel module for Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A RTC on chip module
+endef
+
+$(eval $(call KernelPackage,rtc-rs5c372a))
+
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
TITLE:=MTD subsystem tests
KCONFIG:=CONFIG_MTD_TESTS
- DEPENDS:=+kmod-nand
FILES:=\
$(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
$(eval $(call KernelPackage,mtdtests))
-define KernelPackage/nand
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NAND flash support
- KCONFIG:=CONFIG_MTD_NAND \
- CONFIG_MTD_NAND_IDS \
- CONFIG_MTD_NAND_ECC
- FILES:= \
- $(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
- $(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
- $(LINUX_DIR)/drivers/mtd/nand/nand.ko
- AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
-endef
-
-define KernelPackage/nand/description
- Kernel module for NAND support
-endef
-
-$(eval $(call KernelPackage,nand))
-
-
-define KernelPackage/nandsim
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NAND simulator
- DEPENDS:=+kmod-nand
- KCONFIG:=CONFIG_MTD_NAND_NANDSIM
- FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
-endef
-
-define KernelPackage/nandsim/description
- Kernel module for NAND flash simulation.
-endef
-
-$(eval $(call KernelPackage,nandsim))
-
define KernelPackage/serial-8250
SUBMENU:=$(OTHER_MENU)
TITLE:=8250 UARTs
CONFIG_SERIAL_8250_SHARE_IRQ=y \
CONFIG_SERIAL_8250_DETECT_IRQ=n \
CONFIG_SERIAL_8250_RSA=n
- FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250$(if $(call kernel_patchver_ge,3.7),$(if $(call kernel_patchver_le,3.8),_core)).ko
+ FILES:= \
+ $(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
+ $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko@ge4.4
endef
define KernelPackage/serial-8250/description
TITLE:=Generic register map support
DEPENDS:=+kmod-lib-lzo +kmod-i2c-core
KCONFIG:=CONFIG_REGMAP \
+ CONFIG_REGMAP_MMIO \
CONFIG_REGMAP_SPI \
CONFIG_REGMAP_I2C \
CONFIG_SPI=y
FILES:= \
$(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
+ $(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko \
$(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
- AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-spi)
+ AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-mmio regmap-spi)
endef
define KernelPackage/regmap/description
define KernelPackage/zram
SUBMENU:=$(OTHER_MENU)
TITLE:=ZRAM
- DEPENDS:=@!LINUX_3_3 +kmod-lib-lzo
+ DEPENDS:=+kmod-lib-lzo +kmod-lib-lz4
KCONFIG:= \
CONFIG_ZSMALLOC \
CONFIG_ZRAM \
CONFIG_ZRAM_DEBUG=n \
- CONFIG_PGTABLE_MAPPING=n
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.14.0)),1)
- FILES:=\
+ CONFIG_PGTABLE_MAPPING=n \
+ CONFIG_ZSMALLOC_STAT=n \
+ CONFIG_ZRAM_LZ4_COMPRESS=y
+ FILES:= \
$(LINUX_DIR)/mm/zsmalloc.ko \
$(LINUX_DIR)/drivers/block/zram/zram.ko
-else
- FILES:= \
- $(LINUX_DIR)/drivers/staging/zsmalloc/zsmalloc.ko \
- $(LINUX_DIR)/drivers/staging/zram/zram.ko
-endif
AUTOLOAD:=$(call AutoLoad,20,zsmalloc zram)
endef
$(eval $(call KernelPackage,zram))
-define KernelPackage/mvsdio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Marvell SDIO support
- DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu +kmod-mmc
- KCONFIG:=CONFIG_MMC_MVSDIO
- FILES:=$(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
- AUTOLOAD:=$(call AutoProbe,mvsdio)
-endef
-
-define KernelPackage/mvsdio/description
- Kernel support for the Marvell SDIO controller
-endef
-
-$(eval $(call KernelPackage,mvsdio))
-
-
define KernelPackage/pps
SUBMENU:=$(OTHER_MENU)
TITLE:=PPS support
$(eval $(call KernelPackage,pps-gpio))
+define KernelPackage/pps-ldisc
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PPS line discipline
+ DEPENDS:=+kmod-pps
+ KCONFIG:=CONFIG_PPS_CLIENT_LDISC
+ FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-ldisc.ko
+ AUTOLOAD:=$(call AutoLoad,18,pps-ldisc,1)
+endef
+
+define KernelPackage/pps-ldisc/description
+ Support for a PPS source connected with the CD (Carrier
+ Detect) pin of your serial port.
+endef
+
+$(eval $(call KernelPackage,pps-ldisc))
+
+
define KernelPackage/ptp
SUBMENU:=$(OTHER_MENU)
TITLE:=PTP clock support
DEPENDS:=+kmod-pps
- KCONFIG:=CONFIG_PTP_1588_CLOCK
+ KCONFIG:= \
+ CONFIG_PTP_1588_CLOCK \
+ CONFIG_NET_PTP_CLASSIFY=y
FILES:=$(LINUX_DIR)/drivers/ptp/ptp.ko
AUTOLOAD:=$(call AutoLoad,18,ptp,1)
endef
define KernelPackage/ptp-gianfar
SUBMENU:=$(OTHER_MENU)
TITLE:=Freescale Gianfar PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-gianfar +kmod-ptp
+ DEPENDS:=@TARGET_mpc85xx +kmod-ptp
KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
$(eval $(call KernelPackage,random-core))
+define KernelPackage/random-omap
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Hardware Random Number Generator OMAP support
+ KCONFIG:=CONFIG_HW_RANDOM_OMAP
+ FILES:=$(LINUX_DIR)/drivers/char/hw_random/omap-rng.ko
+ DEPENDS:=@TARGET_omap24xx +kmod-random-core
+ AUTOLOAD:=$(call AutoProbe,random-omap)
+endef
+
+define KernelPackage/random-omap/description
+ Kernel module for the OMAP Random Number Generator
+ found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx multimedia processors.
+endef
+
+$(eval $(call KernelPackage,random-omap))
define KernelPackage/thermal
SUBMENU:=$(OTHER_MENU)
KCONFIG:= \
CONFIG_THERMAL \
CONFIG_THERMAL_OF=y \
+ CONFIG_CPU_THERMAL=y \
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \
$(eval $(call KernelPackage,thermal))
-define KernelPackage/thermal-armada
+define KernelPackage/gpio-beeper
SUBMENU:=$(OTHER_MENU)
- TITLE:=Armada 370/XP thermal management
- DEPENDS:=@TARGET_mvebu +kmod-thermal
- KCONFIG:=CONFIG_ARMADA_THERMAL
- FILES:=$(LINUX_DIR)/drivers/thermal/armada_thermal.ko
- AUTOLOAD:=$(call AutoProbe,armada_thermal)
+ TITLE:=GPIO beeper support
+ DEPENDS:=+kmod-input-core
+ KCONFIG:= \
+ CONFIG_INPUT_MISC=y \
+ CONFIG_INPUT_GPIO_BEEPER
+ FILES:= \
+ $(LINUX_DIR)/drivers/input/misc/gpio-beeper.ko
+ AUTOLOAD:=$(call AutoLoad,50,gpio-beeper)
endef
-define KernelPackage/thermal-armada/description
- Enable this module if you want to have support for thermal management
- controller present in Armada 370 and Armada XP SoC.
+define KernelPackage/gpio-beeper/description
+ This enables playing beeps through an GPIO-connected buzzer
endef
-$(eval $(call KernelPackage,thermal-armada))
+$(eval $(call KernelPackage,gpio-beeper))
-define KernelPackage/thermal-imx
+define KernelPackage/echo
SUBMENU:=$(OTHER_MENU)
- TITLE:=Temperature sensor driver for Freescale i.MX SoCs
- DEPENDS:=@TARGET_imx6 +kmod-thermal
- KCONFIG:= \
- CONFIG_CPU_THERMAL=y \
- CONFIG_IMX_THERMAL
- FILES:=$(LINUX_DIR)/drivers/thermal/imx_thermal.ko
- AUTOLOAD:=$(call AutoProbe,imx_thermal)
+ TITLE:=Line Echo Canceller
+ KCONFIG:=CONFIG_ECHO
+ FILES:=$(LINUX_DIR)/drivers/misc/echo/echo.ko
+ AUTOLOAD:=$(call AutoLoad,50,echo)
+endef
+
+define KernelPackage/echo/description
+ This driver provides line echo cancelling support for mISDN and
+ DAHDI drivers
+endef
+
+$(eval $(call KernelPackage,echo))
+
+
+define KernelPackage/bmp085
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BMP085/BMP18x pressure sensor
+ DEPENDS:= +kmod-regmap @!LINUX_3_18 @!LINUX_4_1
+ KCONFIG:= CONFIG_BMP085
+ FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
+endef
+
+define KernelPackage/bmp085/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensors BMP085 and BMP18x.
+endef
+
+$(eval $(call KernelPackage,bmp085))
+
+
+define KernelPackage/bmp085-i2c
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BMP085/BMP18x pressure sensor I2C
+ DEPENDS:= +kmod-bmp085
+ KCONFIG:= CONFIG_BMP085_I2C
+ FILES:= $(LINUX_DIR)/drivers/misc/bmp085-i2c.ko
+ AUTOLOAD:=$(call AutoProbe,bmp085-i2c)
+endef
+define KernelPackage/bmp085-i2c/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensor connected via I2C.
+endef
+
+$(eval $(call KernelPackage,bmp085-i2c))
+
+
+define KernelPackage/bmp085-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BMP085/BMP18x pressure sensor SPI
+ DEPENDS:= +kmod-bmp085
+ KCONFIG:= CONFIG_BMP085_SPI
+ FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
+ AUTOLOAD:=$(call AutoProbe,bmp085-spi)
+endef
+define KernelPackage/bmp085-spi/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensor connected via SPI.
+endef
+
+$(eval $(call KernelPackage,bmp085-spi))
+
+define KernelPackage/tpm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM Hardware Support
+ KCONFIG:= CONFIG_TCG_TPM
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
+ AUTOLOAD:=$(call AutoLoad,10,tpm,1)
+endef
+
+define KernelPackage/tpm/description
+ This enables TPM Hardware Support.
+endef
+
+$(eval $(call KernelPackage,tpm))
+
+define KernelPackage/tpm-tis
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM TIS 1.2 Interface / TPM 2.0 FIFO Interface
+ DEPENDS:= @TARGET_x86 +kmod-tpm
+ KCONFIG:= CONFIG_TCG_TIS
+ FILES:= \
+ $(LINUX_DIR)/drivers/char/tpm/tpm_tis.ko \
+ $(LINUX_DIR)/drivers/char/tpm/tpm_tis_core.ko
+ AUTOLOAD:=$(call AutoLoad,20,tpm_tis,1)
+endef
+
+define KernelPackage/tpm-tis/description
+ If you have a TPM security chip that is compliant with the
+ TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
+ specification (TPM2.0) say Yes and it will be accessible from
+ within Linux.
+endef
+
+$(eval $(call KernelPackage,tpm-tis))
+
+define KernelPackage/tpm-i2c-atmel
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM I2C Atmel Support
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_ATMEL
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_atmel.ko
+ AUTOLOAD:=$(call AutoLoad,40,tpm_i2c_atmel,1)
+endef
+
+define KernelPackage/tpm-i2c-atmel/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Atmel)
+endef
+
+$(eval $(call KernelPackage,tpm-i2c-atmel))
+
+define KernelPackage/tpm-i2c-infineon
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:= TPM I2C Infineon driver
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_INFINEON
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_infineon.ko
+ AUTOLOAD:= $(call AutoLoad,40,tpm_i2c_infineon,1)
endef
-define KernelPackage/thermal-imx/description
- Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
- It supports one critical trip point and one passive trip point. The
- cpufreq is used as the cooling device to throttle CPUs when the
- passive trip is crossed.
+define KernelPackage/tpm-i2c-infineon/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Infineon)
endef
-$(eval $(call KernelPackage,thermal-imx))
+$(eval $(call KernelPackage,tpm-i2c-infineon))
-define KernelPackage/thermal-kirkwood
+define KernelPackage/w83627hf-wdt
SUBMENU:=$(OTHER_MENU)
- TITLE:=Temperature sensor on Marvell Kirkwood SoCs
- DEPENDS:=@TARGET_kirkwood +kmod-thermal
- KCONFIG:=CONFIG_KIRKWOOD_THERMAL
- FILES:=$(LINUX_DIR)/drivers/thermal/kirkwood_thermal.ko
- AUTOLOAD:=$(call AutoProbe,kirkwood_thermal)
+ TITLE:=Winbond 83627HF Watchdog Timer
+ KCONFIG:=CONFIG_W83627HF_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/w83627hf_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,w83627hf-wdt,1)
endef
-define KernelPackage/thermal-kirkwood/description
- Support for the Kirkwood thermal sensor driver into the Linux thermal
- framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
+define KernelPackage/w83627hf-wdt/description
+ Kernel module for Winbond 83627HF Watchdog Timer
endef
-$(eval $(call KernelPackage,thermal-kirkwood))
+$(eval $(call KernelPackage,w83627hf-wdt))
projects / openwrt / openwrt.git / blobdiff