define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +!LINUX_3_18:kmod-regmap
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +!LINUX_3_18:kmod-regmap +LINUX_4_14:kmod-crypto-ecdh
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BT_HCIUART_BCM=n \
CONFIG_BT_HCIUART_INTEL=n \
CONFIG_BT_HCIUART_H4 \
+ CONFIG_BT_HCIUART_NOKIA=n \
CONFIG_BT_HIDP \
CONFIG_HID_SUPPORT=y
$(call AddDepends/rfkill)
define KernelPackage/gpio-mcp23s08
SUBMENU:=$(OTHER_MENU)
TITLE:=Microchip MCP23xxx I/O expander
- DEPENDS:=@GPIO_SUPPORT +PACKAGE_kmod-i2c-core:kmod-i2c-core
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
KCONFIG:=CONFIG_GPIO_MCP23S08
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko
AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08)
define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP 74HC164 GPIO expander support
- KCONFIG:=CONFIG_GPIO_NXP_74HC164
- FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
- AUTOLOAD:=$(call AutoProbe,nxp_74hc164)
+ KCONFIG:=CONFIG_GPIO_74X164
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-74x164.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-74x164)
endef
define KernelPackage/gpio-nxp-74hc164/description
$(eval $(call KernelPackage,gpio-pcf857x))
-define KernelPackage/iio-core
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Industrial IO core
- KCONFIG:= \
- CONFIG_IIO \
- CONFIG_IIO_BUFFER=y \
- CONFIG_IIO_KFIFO_BUF \
- CONFIG_IIO_TRIGGER=y \
- CONFIG_IIO_TRIGGERED_BUFFER
- FILES:= \
- $(LINUX_DIR)/drivers/iio/industrialio.ko \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko@lt4.4) \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko@ge4.4) \
- $(LINUX_DIR)/drivers/iio/kfifo_buf.ko@lt4.4 \
- $(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko@ge4.4
- AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
-endef
-
-define KernelPackage/iio-core/description
- The industrial I/O subsystem provides a unified framework for
- drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc)
-endef
-
-$(eval $(call KernelPackage,iio-core))
-
-define KernelPackage/iio-ad799x
+define KernelPackage/ppdev
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=kmod-i2c-core kmod-iio-core
- TITLE:=Analog Devices AD799x ADC driver
+ TITLE:=Parallel port support
KCONFIG:= \
- CONFIG_AD799X_RING_BUFFER=y \
- CONFIG_AD799X
- FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
- AUTOLOAD:=$(call AutoLoad,56,ad799x)
-endef
-
-define KernelPackage/iio-ad799x/description
- support for Analog Devices:
- ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
- i2c analog to digital converters (ADC).
+ CONFIG_PARPORT \
+ CONFIG_PPDEV
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport.ko \
+ $(LINUX_DIR)/drivers/char/ppdev.ko
+ AUTOLOAD:=$(call AutoLoad,50,parport ppdev)
endef
-$(eval $(call KernelPackage,iio-ad799x))
+$(eval $(call KernelPackage,ppdev))
-define KernelPackage/iio-dht11
+define KernelPackage/parport-pc
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
- TITLE:=DHT11 (and compatible) humidity and temperature sensors
+ TITLE:=Parallel port interface (PC-style) support
+ DEPENDS:=+kmod-ppdev
KCONFIG:= \
- CONFIG_DHT11
- FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
- AUTOLOAD:=$(call AutoLoad,56,dht11)
-endef
-
-define KernelPackage/iio-dht11/description
- support for DHT11 and DHT22 digitial humidity and temperature sensors
- attached at GPIO lines. You will need a custom device tree file to
- specify the GPIO line to use.
+ CONFIG_KS0108=n \
+ CONFIG_PARPORT_PC \
+ CONFIG_PARPORT_1284=y \
+ CONFIG_PARPORT_PC_FIFO=y \
+ CONFIG_PARPORT_PC_PCMCIA=n \
+ CONFIG_PARPORT_PC_SUPERIO=y \
+ CONFIG_PARPORT_SERIAL=n \
+ CONFIG_PARIDE=n \
+ CONFIG_SCSI_IMM=n \
+ CONFIG_SCSI_PPA=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport_pc.ko
+ AUTOLOAD:=$(call AutoLoad,51,parport_pc)
endef
-$(eval $(call KernelPackage,iio-dht11))
+$(eval $(call KernelPackage,parport-pc))
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
- TITLE:=Parallel port and line printer support
+ TITLE:=Parallel port line printer device support
+ DEPENDS:=+kmod-ppdev
KCONFIG:= \
- CONFIG_PARPORT \
- CONFIG_PRINTER \
- CONFIG_PPDEV
+ CONFIG_PRINTER
FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.ko \
- $(LINUX_DIR)/drivers/char/lp.ko \
- $(LINUX_DIR)/drivers/char/ppdev.ko
- AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
+ $(LINUX_DIR)/drivers/char/lp.ko
+ AUTOLOAD:=$(call AutoLoad,52,lp)
endef
$(eval $(call KernelPackage,lp))
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko@lt4.10 \
+ $(LINUX_DIR)/drivers/mmc/core/mmc_block.ko@ge4.10
AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
- KCONFIG:=CONFIG_SOFT_WATCHDOG
+ KCONFIG:=CONFIG_SOFT_WATCHDOG \
+ CONFIG_SOFT_WATCHDOG_PRETIMEOUT=n
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
AUTOLOAD:=$(call AutoLoad,50,softdog,1)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
- DEPENDS:=+kmod-i2c-core
+ DEPENDS:=+kmod-i2c-core +LINUX_4_14:kmod-regmap
KCONFIG:=CONFIG_RTC_DRV_DS1307 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
$(eval $(call KernelPackage,mtdtests))
+define KernelPackage/mtdoops
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Log panic/oops to an MTD buffer
+ KCONFIG:=CONFIG_MTD_OOPS
+ FILES:=$(LINUX_DIR)/drivers/mtd/mtdoops.ko
+endef
+
+define KernelPackage/mtdoops/description
+ Kernel modules for Log panic/oops to an MTD buffer
+endef
+
+$(eval $(call KernelPackage,mtdoops))
+
+
+define KernelPackage/mtdram
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Test MTD driver using RAM
+ KCONFIG:=CONFIG_MTD_MTDRAM \
+ CONFIG_MTDRAM_TOTAL_SIZE=4096 \
+ CONFIG_MTDRAM_ERASE_SIZE=128
+ FILES:=$(LINUX_DIR)/drivers/mtd/devices/mtdram.ko
+endef
+
+define KernelPackage/mtdram/description
+ Test MTD driver using RAM
+endef
+
+$(eval $(call KernelPackage,mtdram))
+
+
define KernelPackage/serial-8250
SUBMENU:=$(OTHER_MENU)
TITLE:=8250 UARTs
CONFIG_REGMAP_I2C \
CONFIG_SPI=y
FILES:= \
- $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
$(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko \
$(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-mmio regmap-spi)
+ ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
+ ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
+ FILES += $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko
+ endif
+ endif
endef
define KernelPackage/regmap/description
CONFIG_ZRAM \
CONFIG_ZRAM_DEBUG=n \
CONFIG_PGTABLE_MAPPING=n \
+ CONFIG_ZRAM_WRITEBACK=n \
CONFIG_ZSMALLOC_STAT=n \
CONFIG_ZRAM_LZ4_COMPRESS=y
FILES:= \
endef
$(eval $(call KernelPackage,itco-wdt))
+
+
+define KernelPackage/it87-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ITE IT87 Watchdog Timer
+ KCONFIG:=CONFIG_IT87_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/it87_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
+ MODPARAMS.it87-wdt:= \
+ nogameport=1 \
+ nocir=1
+endef
+
+define KernelPackage/it87-wdt/description
+ Kernel module for ITE IT87 Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,it87-wdt))