$(eval $(call KernelPackage,usb-ledtrig-usbport))
-define KernelPackage/usb-musb-hdrc
- TITLE:=Support for Mentor Graphics silicon dual role USB
- KCONFIG:= \
- CONFIG_USB_MUSB_HDRC \
- CONFIG_USB_INVENTRA_DMA=n \
- CONFIG_USB_TI_CPPI41_DMA=n \
- CONFIG_MUSB_PIO_ONLY=y \
- CONFIG_USB_MUSB_DUAL_ROLE=y \
- CONFIG_USB_MUSB_GADGET=n \
- CONFIG_USB_MUSB_HOST=n \
- CONFIG_USB_MUSB_DEBUG=y
- DEPENDS:= \
- @(TARGET_omap||TARGET_omap24xx) +kmod-usb-gadget \
- +TARGET_omap24xx:kmod-usb-musb-tusb6010
- FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
- AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-musb-hdrc/description
- Kernel support for Mentor Graphics silicon dual role USB device.
-endef
-
-$(eval $(call KernelPackage,usb-musb-hdrc))
-
-
-define KernelPackage/usb-musb-platformglue
- TITLE:=MUSB platform glue layer
- KCONFIG:= \
- CONFIG_USB_MUSB_TUSB6010=n \
- CONFIG_USB_MUSB_OMAP2PLUS=n \
- CONFIG_USB_MUSB_AM35X=n \
- CONFIG_USB_MUSB_DSPS \
- CONFIG_USB_MUSB_UX500=n
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-musb-hdrc +kmod-usb-phy-am335x
- FILES:= \
- $(LINUX_DIR)/drivers/usb/musb/musb_dsps.ko \
- $(LINUX_DIR)/drivers/usb/musb/musb_am335x.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-omap-control musb_dsps musb_am335x)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-musb-platformglue/description
- MUSB platform glue modules
-endef
-
-$(eval $(call KernelPackage,usb-musb-platformglue))
-
-
-define KernelPackage/usb-musb-tusb6010
- TITLE:=Support for TUSB 6010
- KCONFIG:=CONFIG_USB_MUSB_TUSB6010
- DEPENDS:=@TARGET_omap24xx
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-musb-tusb6010/description
- TUSB6010 support
-endef
-
-$(eval $(call KernelPackage,usb-musb-tusb6010))
-
-
define KernelPackage/usb-phy-nop
TITLE:=Support for USB NOP transceiver
KCONFIG:=CONFIG_NOP_USB_XCEIV
HIDDEN:=1
FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-generic.ko
- AUTOLOAD:=$(call AutoLoad,43,phy-generic)
+ AUTOLOAD:=$(call AutoLoad,21,phy-generic,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-phy-nop))
-define KernelPackage/usb-phy-am335x
- TITLE:=Support for AM335x USB PHY
- KCONFIG:= \
- CONFIG_AM335X_PHY_USB \
- CONFIG_AM335X_CONTROL_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop
- FILES:= \
- $(LINUX_DIR)/drivers/usb/phy/phy-am335x.ko \
- $(LINUX_DIR)/drivers/usb/phy/phy-am335x-control.ko
- AUTOLOAD:=$(call AutoLoad,44,phy-am335x)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-am335x/description
- Support for AM335x USB PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-am335x))
-
-
-define KernelPackage/usb-phy-omap-usb2
- TITLE:=Support for OMAP2 USB PHY
- KCONFIG:= \
- CONFIG_OMAP_USB2 \
- CONFIG_OMAP_CONTROL_PHY
- DEPENDS:=@TARGET_omap
- FILES:= \
- $(LINUX_DIR)/drivers/phy/phy-omap-usb2.ko \
- $(LINUX_DIR)/drivers/phy/phy-omap-control.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-omap-control phy-omap-usb2)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-omap-usb2/description
- Support for AM335x USB PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-omap-usb2))
-
-
-define KernelPackage/usb-phy-omap-usb3
- TITLE:=Support for OMAP USB3 PHY
- KCONFIG:=CONFIG_OMAP_USB3
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2
- FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-omap-usb3.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-omap-usb3)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-omap-usb3/description
- Support for OMAP USB3 PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-omap-usb3))
-
-
-define KernelPackage/usb-phy-twl4030
- TITLE:=Support for TWL4030 OTG PHY
- KCONFIG:=CONFIG_TWL4030_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
- FILES:=$(LINUX_DIR)/drivers/phy/phy-twl4030-usb.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-twl4030-usb)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-twl4030/description
- Support for TWL4030/TWL5030/TPS659x0 OTG PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-twl4030))
-
-
-define KernelPackage/usb-phy-twl6030
- TITLE:=Support for TWL6030 OTG PHY
- KCONFIG:=CONFIG_TWL6030_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
- FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-twl6030-usb.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-twl6030-usb)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-twl6030/description
- Support for TWL6030 OTG PHY
-endef
-
-$(eval $(call KernelPackage,usb-phy-twl6030))
-
-
define KernelPackage/usb-gadget
TITLE:=USB Gadget support
KCONFIG:=CONFIG_USB_GADGET
HIDDEN:=1
FILES:=\
$(LINUX_DIR)/drivers/usb/gadget/udc/udc-core.ko
- AUTOLOAD:=$(call AutoLoad,45,udc-core)
+ AUTOLOAD:=$(call AutoLoad,21,udc-core,1)
DEPENDS:=@USB_GADGET_SUPPORT
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-ohci-pci))
-define KernelPackage/usb2-fsl
- TITLE:=Support for Freescale USB2 controllers
- DEPENDS:=@TARGET_mpc85xx
- HIDDEN:=1
- KCONFIG:=CONFIG_USB_FSL_MPH_DR_OF
- FILES:=$(LINUX_DIR)/drivers/usb/host/fsl-mph-dr-of.ko
- AUTOLOAD:=$(call AutoLoad,39,fsl-mph-dr-of,1)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb2-fsl/description
- Kernel support for Freescale USB2 (EHCI) controllers
-endef
-
-$(eval $(call KernelPackage,usb2-fsl))
-
-
-define KernelPackage/usb2-omap
- TITLE:=Support for USB2 for OMAP
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-phy-am335x +kmod-usb2
- KCONFIG:=\
- CONFIG_MFD_OMAP_USB_HOST=y \
- CONFIG_USB_EHCI_HCD_OMAP
- FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-omap.ko
- AUTOLOAD:=$(call AutoLoad,39,ehci-omap)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb2-omap/description
- Kernel support for OMAP USB2 (EHCI) controllers
-endef
-
-$(eval $(call KernelPackage,usb2-omap))
-
define KernelPackage/usb-bcma
TITLE:=Support for BCMA USB controllers
DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx||TARGET_bcm53xx
endef
$(eval $(call KernelPackage,usb-ssb))
+define KernelPackage/usb-ehci
+ TITLE:=EHCI controller support
+ HIDDEN:=1
+ KCONFIG:= \
+ CONFIG_USB_EHCI_HCD
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,35,ehci-hcd,1)
+ $(call AddDepends/usb)
+endef
+$(eval $(call KernelPackage,usb-ehci))
+
define KernelPackage/usb2
TITLE:=Support for USB2 controllers
DEPENDS:=\
+TARGET_brcm47xx:kmod-usb-ssb \
+TARGET_bcm53xx:kmod-usb-bcma \
+TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
- +TARGET_mpc85xx:kmod-usb2-fsl
+ +kmod-usb-ehci
KCONFIG:=\
- CONFIG_USB_EHCI_HCD \
- CONFIG_USB_EHCI_ATH79=y \
+ CONFIG_USB_EHCI_HCD_PLATFORM \
CONFIG_USB_EHCI_BCM63XX=y \
CONFIG_USB_IMX21_HCD=y \
CONFIG_USB_EHCI_MXC=y \
CONFIG_USB_OCTEON_EHCI=y \
CONFIG_USB_EHCI_HCD_ORION=y \
- CONFIG_USB_EHCI_HCD_PLATFORM=y \
CONFIG_USB_EHCI_HCD_AT91=y \
CONFIG_USB_EHCI_FSL
FILES:= \
- $(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko \
$(LINUX_DIR)/drivers/usb/host/ehci-platform.ko
ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-orion.ko),)
FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-orion.ko
ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko),)
FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko
endif
- ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko),)
- FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko
- endif
- AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion ehci-atmel ehci-fsl,1)
+ AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion ehci-atmel,1)
$(call AddDepends/usb)
endef
define KernelPackage/usb-dwc2
TITLE:=DWC2 USB controller driver
- DEPENDS:=+(TARGET_brcm2708||TARGET_at91||TARGET_brcm63xx||TARGET_mxs||TARGET_imx6||TARGET_omap):kmod-usb-gadget
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget
KCONFIG:= \
CONFIG_USB_DWC2 \
CONFIG_USB_DWC2_PCI \
$(eval $(call KernelPackage,usb-serial-ch341))
+define KernelPackage/usb-serial-edgeport
+ TITLE:=Support for Digi Edgeport devices
+ KCONFIG:=CONFIG_USB_SERIAL_EDGEPORT
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/io_edgeport.ko
+ AUTOLOAD:=$(call AutoProbe,io_edgeport)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-edgeport/description
+ Kernel support for Inside Out Networks (Digi)
+ Edgeport/4
+ Rapidport/4
+ Edgeport/4t
+ Edgeport/2
+ Edgeport/4i
+ Edgeport/2i
+ Edgeport/421
+ Edgeport/21
+ Edgeport/8
+ Edgeport/8 Dual
+ Edgeport/2D8
+ Edgeport/4D8
+ Edgeport/8i
+ Edgeport/2 DIN
+ Edgeport/4 DIN
+ Edgeport/16 Dual
+endef
+
+define KernelPackage/usb-serial-edgeport/install
+ $(INSTALL_DIR) $(1)/lib/firmware/edgeport
+ $(INSTALL_DATA) $(LINUX_DIR)/firmware/edgeport/boot.fw $(1)/lib/firmware/edgeport/
+ $(INSTALL_DATA) $(LINUX_DIR)/firmware/edgeport/boot2.fw $(1)/lib/firmware/edgeport/
+ $(INSTALL_DATA) $(LINUX_DIR)/firmware/edgeport/down.fw $(1)/lib/firmware/edgeport/
+ $(INSTALL_DATA) $(LINUX_DIR)/firmware/edgeport/down2.fw $(1)/lib/firmware/edgeport/
+endef
+
+$(eval $(call KernelPackage,usb-serial-edgeport))
+
+
define KernelPackage/usb-serial-ftdi
TITLE:=Support for FTDI devices
KCONFIG:=CONFIG_USB_SERIAL_FTDI_SIO
$(eval $(call KernelPackage,usb-storage-extras))
+define KernelPackage/usb-storage-uas
+ SUBMENU:=$(USB_MENU)
+ TITLE:=USB Attached SCSI (UASP) support
+ DEPENDS:=+kmod-usb-storage
+ KCONFIG:=CONFIG_USB_UAS
+ FILES:=$(LINUX_DIR)/drivers/usb/storage/uas.ko
+ AUTOLOAD:=$(call AutoProbe,uas)
+endef
+
+define KernelPackage/usb-storage-uas/description
+ Say Y here if you want to include support for
+ USB Attached SCSI (UAS/UASP), a higher
+ performance protocol available on many
+ newer USB 3.0 storage devices
+endef
+
+$(eval $(call KernelPackage,usb-storage-uas))
+
+
define KernelPackage/usb-atm
TITLE:=Support for ATM on USB bus
DEPENDS:=+kmod-atm
$(eval $(call KernelPackage,usb-net-kalmia))
+define KernelPackage/usb-net-pl
+ TITLE:=Prolific PL-2301/2302/25A1 based cables
+ KCONFIG:=CONFIG_USB_NET_PLUSB
+ FILES:=$(LINUX_DIR)/drivers/net/usb/plusb.ko
+ AUTOLOAD:=$(call AutoProbe,plusb)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-pl/description
+ Kernel support for Prolific PL-2301/2302/25A1 based cables
+endef
+
+$(eval $(call KernelPackage,usb-net-pl))
define KernelPackage/usb-hid
TITLE:=Support for USB Human Input Devices
$(eval $(call KernelPackage,usbip-server))
+define KernelPackage/usb-chipidea
+ TITLE:=Host and device support for Chipidea controllers
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ar71xx +kmod-usb-ehci +kmod-usb-phy-nop
+ KCONFIG:= \
+ CONFIG_EXTCON \
+ CONFIG_USB_CHIPIDEA \
+ CONFIG_USB_CHIPIDEA_HOST=y \
+ CONFIG_USB_CHIPIDEA_UDC=y \
+ CONFIG_USB_CHIPIDEA_DEBUG=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/extcon/extcon.ko@lt4.9 \
+ $(LINUX_DIR)/drivers/extcon/extcon-core.ko@ge4.9 \
+ $(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko
+ AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-chipidea/description
+ Kernel support for USB Chipidea controllers
+endef
+
+$(eval $(call KernelPackage,usb-chipidea))
+
define KernelPackage/usbmon
TITLE:=USB traffic monitor
KCONFIG:=CONFIG_USB_MON
TITLE:=Support for USB3 controllers
DEPENDS:= \
+TARGET_bcm53xx:kmod-usb-bcma \
- +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
- +TARGET_omap:kmod-usb-phy-omap-usb3
+ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3
KCONFIG:= \
CONFIG_USB_XHCI_HCD \
CONFIG_USB_XHCI_PCI \
projects / openwrt / openwrt.git / blobdiff