$(eval $(call KernelPackage,usb-ledtrig-usbport))
-define KernelPackage/usb-musb-hdrc
- TITLE:=Support for Mentor Graphics silicon dual role USB
- KCONFIG:= \
- CONFIG_USB_MUSB_HDRC \
- CONFIG_USB_INVENTRA_DMA=n \
- CONFIG_USB_TI_CPPI41_DMA=n \
- CONFIG_MUSB_PIO_ONLY=y \
- CONFIG_USB_MUSB_DUAL_ROLE=y \
- CONFIG_USB_MUSB_GADGET=n \
- CONFIG_USB_MUSB_HOST=n \
- CONFIG_USB_MUSB_DEBUG=y
- DEPENDS:= \
- @TARGET_omap24xx +kmod-usb-gadget +kmod-usb-musb-tusb6010
- FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
- AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
+define KernelPackage/usb-phy-nop
+ TITLE:=Support for USB NOP transceiver
+ KCONFIG:=CONFIG_NOP_USB_XCEIV
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-generic.ko
+ AUTOLOAD:=$(call AutoLoad,21,phy-generic,1)
$(call AddDepends/usb)
endef
-define KernelPackage/usb-musb-hdrc/description
- Kernel support for Mentor Graphics silicon dual role USB device.
+define KernelPackage/usb-phy-nop/description
+ Support for USB NOP transceiver
endef
-$(eval $(call KernelPackage,usb-musb-hdrc))
+$(eval $(call KernelPackage,usb-phy-nop))
-define KernelPackage/usb-musb-tusb6010
- TITLE:=Support for TUSB 6010
- KCONFIG:=CONFIG_USB_MUSB_TUSB6010
- DEPENDS:=@TARGET_omap24xx
+define KernelPackage/usb-phy-qcom-dwc3
+ TITLE:=DWC3 USB QCOM PHY driver
+ DEPENDS:=@TARGET_ipq40xx||@TARGET_ipq806x +kmod-usb-dwc3-of-simple
+ KCONFIG:= CONFIG_PHY_QCOM_DWC3
+ FILES:= \
+ $(LINUX_DIR)/drivers/phy/phy-qcom-dwc3.ko@lt4.13 \
+ $(LINUX_DIR)/drivers/phy/qualcomm/phy-qcom-dwc3.ko@ge4.13
+ AUTOLOAD:=$(call AutoLoad,45,phy-qcom-dwc3,1)
$(call AddDepends/usb)
endef
-define KernelPackage/usb-musb-tusb6010/description
- TUSB6010 support
+define KernelPackage/usb-phy-qcom-dwc3/description
+ This driver provides support for the integrated DesignWare
+ USB3 IP Core within the QCOM SoCs.
endef
-$(eval $(call KernelPackage,usb-musb-tusb6010))
+$(eval $(call KernelPackage,usb-phy-qcom-dwc3))
-define KernelPackage/usb-phy-nop
- TITLE:=Support for USB NOP transceiver
- KCONFIG:=CONFIG_NOP_USB_XCEIV
+define KernelPackage/phy-ath79-usb
+ TITLE:=Support for ATH79 USB PHY
+ KCONFIG:=CONFIG_PHY_AR7100_USB \
+ CONFIG_PHY_AR7200_USB
+ DEPENDS:=@TARGET_ath79
HIDDEN:=1
- FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-generic.ko
- AUTOLOAD:=$(call AutoLoad,43,phy-generic)
+ FILES:=$(LINUX_DIR)/drivers/phy/phy-ar7100-usb.ko \
+ $(LINUX_DIR)/drivers/phy/phy-ar7200-usb.ko
+ AUTOLOAD:=$(call AutoLoad,21,phy-ar7100-usb phy-ar7200-usb,1)
$(call AddDepends/usb)
endef
-define KernelPackage/usb-phy-nop/description
- Support for USB NOP transceiver
+define KernelPackage/phy-ath79-usb/description
+ Support for ATH79 USB transceiver
endef
-$(eval $(call KernelPackage,usb-phy-nop))
+$(eval $(call KernelPackage,phy-ath79-usb))
define KernelPackage/usb-gadget
HIDDEN:=1
FILES:=\
$(LINUX_DIR)/drivers/usb/gadget/udc/udc-core.ko
- AUTOLOAD:=$(call AutoLoad,45,udc-core)
+ AUTOLOAD:=$(call AutoLoad,21,udc-core,1)
DEPENDS:=@USB_GADGET_SUPPORT
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-lib-composite))
+define KernelPackage/usb-gadget-hid
+ TITLE:=USB HID Gadget Support
+ KCONFIG:=CONFIG_USB_G_HID
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_hid.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_hid.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_hid)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-hid/description
+ Kernel support for USB HID Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-gadget-hid))
+
define KernelPackage/usb-gadget-ehci-debug
TITLE:=USB EHCI debug port Gadget support
KCONFIG:=\
CONFIG_USB_G_DBGP_PRINTK=n
DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite +kmod-usb-gadget-serial
FILES:=$(LINUX_DIR)/drivers/usb/gadget/legacy/g_dbgp.ko
- AUTOLOAD:=$(call AutoLoad,52,g_dbgp)
$(call AddDepends/usb)
endef
$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm_subset.ko \
$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_rndis.ko \
$(LINUX_DIR)/drivers/usb/gadget/legacy/g_ether.ko
- AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm g_ether)
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm)
$(call AddDepends/usb)
endef
$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_obex.ko \
$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_serial.ko \
$(LINUX_DIR)/drivers/usb/gadget/legacy/g_serial.ko
- AUTOLOAD:=$(call AutoLoad,52,usb_f_acm g_serial)
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_acm)
$(call AddDepends/usb)
endef
FILES:= \
$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_mass_storage.ko \
$(LINUX_DIR)/drivers/usb/gadget/legacy/g_mass_storage.ko
- AUTOLOAD:=$(call AutoLoad,52,usb_f_mass_storage g_mass_storage)
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_mass_storage)
$(call AddDepends/usb)
endef
define KernelPackage/usb-uhci
TITLE:=Support for UHCI controllers
KCONFIG:= \
+ CONFIG_USB_PCI=y \
CONFIG_USB_UHCI_ALT \
CONFIG_USB_UHCI_HCD
FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko
define KernelPackage/usb-ohci-pci
TITLE:=Support for PCI OHCI controllers
DEPENDS:=@PCI_SUPPORT +kmod-usb-ohci
- KCONFIG:=CONFIG_USB_OHCI_HCD_PCI
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_OHCI_HCD_PCI
FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-pci.ko
AUTOLOAD:=$(call AutoLoad,51,ohci-pci,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-bcma))
+define KernelPackage/usb-fotg210
+ TITLE:=Support for FOTG210 USB host controllers
+ DEPENDS:=@USB_SUPPORT @TARGET_gemini
+ KCONFIG:=CONFIG_USB_FOTG210_HCD
+ FILES:= \
+ $(if $(CONFIG_USB_FOTG210_HCD),$(LINUX_DIR)/drivers/usb/host/fotg210-hcd.ko)
+ AUTOLOAD:=$(call AutoLoad,50,fotg210-hcd,1)
+ $(call AddDepends/usb)
+endef
+$(eval $(call KernelPackage,usb-fotg210))
+
define KernelPackage/usb-ssb
TITLE:=Support for SSB USB controllers
DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
endef
$(eval $(call KernelPackage,usb-ssb))
+define KernelPackage/usb-ehci
+ TITLE:=EHCI controller support
+ HIDDEN:=1
+ KCONFIG:= \
+ CONFIG_USB_EHCI_HCD
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,35,ehci-hcd,1)
+ $(call AddDepends/usb)
+endef
+$(eval $(call KernelPackage,usb-ehci))
+
define KernelPackage/usb2
TITLE:=Support for USB2 controllers
DEPENDS:=\
+TARGET_brcm47xx:kmod-usb-bcma \
+TARGET_brcm47xx:kmod-usb-ssb \
+TARGET_bcm53xx:kmod-usb-bcma \
- +TARGET_bcm53xx:kmod-phy-bcm-ns-usb2
+ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
+ +TARGET_ath79:kmod-phy-ath79-usb \
+ +kmod-usb-ehci
KCONFIG:=\
- CONFIG_USB_EHCI_HCD \
- CONFIG_USB_EHCI_ATH79=y \
+ CONFIG_USB_EHCI_HCD_PLATFORM \
CONFIG_USB_EHCI_BCM63XX=y \
CONFIG_USB_IMX21_HCD=y \
CONFIG_USB_EHCI_MXC=y \
CONFIG_USB_OCTEON_EHCI=y \
CONFIG_USB_EHCI_HCD_ORION=y \
- CONFIG_USB_EHCI_HCD_PLATFORM=y \
CONFIG_USB_EHCI_HCD_AT91=y \
CONFIG_USB_EHCI_FSL
FILES:= \
- $(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko \
$(LINUX_DIR)/drivers/usb/host/ehci-platform.ko
ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-orion.ko),)
FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-orion.ko
define KernelPackage/usb2-pci
TITLE:=Support for PCI USB2 controllers
DEPENDS:=@PCI_SUPPORT +kmod-usb2
- KCONFIG:=CONFIG_USB_EHCI_PCI
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_EHCI_PCI
FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-pci.ko
AUTOLOAD:=$(call AutoLoad,42,ehci-pci,1)
$(call AddDepends/usb)
TITLE:=DWC2 USB controller driver
DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget
KCONFIG:= \
+ CONFIG_USB_PCI=y \
CONFIG_USB_DWC2 \
CONFIG_USB_DWC2_PCI \
CONFIG_USB_DWC2_PLATFORM \
$(eval $(call KernelPackage,usb-dwc3))
+define KernelPackage/usb-dwc3-of-simple
+ TITLE:=DWC3 USB simple OF driver
+ DEPENDS:=@!LINUX_4_19 @TARGET_ipq40xx||@TARGET_ipq806x +kmod-usb-dwc3
+ KCONFIG:= CONFIG_USB_DWC3_OF_SIMPLE
+ FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-of-simple.ko
+ AUTOLOAD:=$(call AutoLoad,53,dwc3-of-simple,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-of-simple/description
+ This driver provides generic platform glue for the integrated DesignWare
+ USB3 IP Core.
+endef
+
+
+$(eval $(call KernelPackage,usb-dwc3-of-simple))
+
+
+define KernelPackage/usb-dwc3-qcom
+ TITLE:=DWC3 Qualcomm USB driver
+ DEPENDS:=@LINUX_4_19 @TARGET_ipq40xx||@TARGET_ipq806x +kmod-usb-dwc3
+ KCONFIG:= CONFIG_USB_DWC3_QCOM
+ FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
+ AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-qcom/description
+ Some Qualcomm SoCs use DesignWare Core IP for USB2/3 functionality.
+ This driver also handles Qscratch wrapper which is needed for
+ peripheral mode support.
+endef
+
+
+$(eval $(call KernelPackage,usb-dwc3-qcom))
+
+
define KernelPackage/usb-acm
TITLE:=Support for modems/isdn controllers
KCONFIG:=CONFIG_USB_ACM
$(eval $(call KernelPackage,usb-serial-ch341))
+define KernelPackage/usb-serial-edgeport
+ TITLE:=Support for Digi Edgeport devices
+ KCONFIG:=CONFIG_USB_SERIAL_EDGEPORT
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/io_edgeport.ko
+ AUTOLOAD:=$(call AutoProbe,io_edgeport)
+ $(call AddDepends/usb-serial)
+ DEPENDS+=+edgeport-firmware
+endef
+
+define KernelPackage/usb-serial-edgeport/description
+ Kernel support for Inside Out Networks (Digi)
+ Edgeport/4
+ Rapidport/4
+ Edgeport/4t
+ Edgeport/2
+ Edgeport/4i
+ Edgeport/2i
+ Edgeport/421
+ Edgeport/21
+ Edgeport/8
+ Edgeport/8 Dual
+ Edgeport/2D8
+ Edgeport/4D8
+ Edgeport/8i
+ Edgeport/2 DIN
+ Edgeport/4 DIN
+ Edgeport/16 Dual
+endef
+
+$(eval $(call KernelPackage,usb-serial-edgeport))
+
+
define KernelPackage/usb-serial-ftdi
TITLE:=Support for FTDI devices
KCONFIG:=CONFIG_USB_SERIAL_FTDI_SIO
$(eval $(call KernelPackage,usb-serial-mos7720))
+define KernelPackage/usb-serial-mos7840
+ TITLE:=Support for Moschip MOS7840 devices
+ KCONFIG:=CONFIG_USB_SERIAL_MOS7840
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7840.ko
+ AUTOLOAD:=$(call AutoProbe,mos7840)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-mos7840/description
+ Kernel support for Moschip MOS7840 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-mos7840))
+
+
define KernelPackage/usb-serial-pl2303
TITLE:=Support for Prolific PL2303 devices
KCONFIG:=CONFIG_USB_SERIAL_PL2303
$(eval $(call KernelPackage,usb-storage-extras))
+define KernelPackage/usb-storage-uas
+ SUBMENU:=$(USB_MENU)
+ TITLE:=USB Attached SCSI (UASP) support
+ DEPENDS:=+kmod-usb-storage
+ KCONFIG:=CONFIG_USB_UAS
+ FILES:=$(LINUX_DIR)/drivers/usb/storage/uas.ko
+ AUTOLOAD:=$(call AutoProbe,uas,1)
+endef
+
+define KernelPackage/usb-storage-uas/description
+ Say Y here if you want to include support for
+ USB Attached SCSI (UAS/UASP), a higher
+ performance protocol available on many
+ newer USB 3.0 storage devices
+endef
+
+$(eval $(call KernelPackage,usb-storage-uas))
+
+
define KernelPackage/usb-atm
TITLE:=Support for ATM on USB bus
DEPENDS:=+kmod-atm
$(eval $(call KernelPackage,usb-net-kalmia))
+define KernelPackage/usb-net-pl
+ TITLE:=Prolific PL-2301/2302/25A1 based cables
+ KCONFIG:=CONFIG_USB_NET_PLUSB
+ FILES:=$(LINUX_DIR)/drivers/net/usb/plusb.ko
+ AUTOLOAD:=$(call AutoProbe,plusb)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-pl/description
+ Kernel support for Prolific PL-2301/2302/25A1 based cables
+endef
+
+$(eval $(call KernelPackage,usb-net-pl))
define KernelPackage/usb-hid
TITLE:=Support for USB Human Input Devices
$(eval $(call KernelPackage,usbip-server))
+define KernelPackage/usb-chipidea
+ TITLE:=Host and device support for Chipidea controllers
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ar71xx||TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop
+ KCONFIG:= \
+ CONFIG_EXTCON \
+ CONFIG_USB_CHIPIDEA \
+ CONFIG_USB_CHIPIDEA_HOST=y \
+ CONFIG_USB_CHIPIDEA_UDC=y \
+ CONFIG_USB_CHIPIDEA_DEBUG=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/extcon/extcon.ko@lt4.9 \
+ $(LINUX_DIR)/drivers/extcon/extcon-core.ko@ge4.9 \
+ $(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
+ $(LINUX_DIR)/drivers/usb/common/ulpi.ko@ge4.18
+ AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-chipidea/description
+ Kernel support for USB Chipidea controllers
+endef
+
+$(eval $(call KernelPackage,usb-chipidea))
+
+
+define KernelPackage/usb-chipidea2
+ TITLE:=Host and device support for Chipidea2 controllers
+ DEPENDS:=+kmod-usb-chipidea
+ KCONFIG:= \
+ CONFIG_EXTCON \
+ CONFIG_USB_CHIPIDEA \
+ CONFIG_USB_CHIPIDEA_HOST=y \
+ CONFIG_USB_CHIPIDEA_UDC=y \
+ CONFIG_USB_CHIPIDEA_DEBUG=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/extcon/extcon.ko@lt4.9 \
+ $(LINUX_DIR)/drivers/extcon/extcon-core.ko@ge4.9 \
+ $(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc_usb2.ko
+ AUTOLOAD:=$(call AutoLoad,39,ci_hdrc_usb2,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-chipidea2/description
+ Kernel support for USB Chipidea controllers
+endef
+
+$(eval $(call KernelPackage,usb-chipidea2))
+
+
define KernelPackage/usbmon
TITLE:=USB traffic monitor
KCONFIG:=CONFIG_USB_MON
+TARGET_bcm53xx:kmod-usb-bcma \
+TARGET_bcm53xx:kmod-phy-bcm-ns-usb3
KCONFIG:= \
+ CONFIG_USB_PCI=y \
CONFIG_USB_XHCI_HCD \
CONFIG_USB_XHCI_PCI \
CONFIG_USB_XHCI_PLATFORM \
define KernelPackage/usb-net2280
TITLE:=Support for NetChip 228x PCI USB peripheral controller
- KCONFIG:= CONFIG_USB_NET2280
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_NET2280
DEPENDS:=@PCI_SUPPORT +kmod-usb-gadget
FILES:=$(LINUX_DIR)/drivers/usb/gadget/udc/net2280.ko
AUTOLOAD:=$(call AutoLoad,46,net2280)
$(eval $(call KernelPackage,usb-net2280))
+define KernelPackage/chaoskey
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Chaoskey hardware RNG support
+ DEPENDS:=+kmod-random-core
+ KCONFIG:=CONFIG_USB_CHAOSKEY
+ FILES:=$(LINUX_DIR)/drivers/usb/misc/chaoskey.ko
+ AUTOLOAD:=$(call AutoProbe,chaoskey)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/chaoskey/description
+ Kernel module for chaoskey, USB attached true random number generator
+endef
+
+$(eval $(call KernelPackage,chaoskey))
+
projects / openwrt / openwrt.git / blobdiff