drv_mac80211_init_device_config() {
hostapd_common_add_device_config
- config_add_string path phy macaddr
+ config_add_string path phy 'macaddr:macaddr'
config_add_string hwmode
config_add_int beacon_int chanbw frag rts
- config_add_int rxantenna txantenna antenna_gain txpower
- config_add_boolean noscan
+ config_add_int rxantenna txantenna antenna_gain txpower distance
+ config_add_boolean noscan ht_coex
config_add_array ht_capab
+ config_add_array channels
+ config_add_boolean \
+ rxldpc \
+ short_gi_80 \
+ short_gi_160 \
+ tx_stbc_2by1 \
+ su_beamformer \
+ su_beamformee \
+ mu_beamformer \
+ mu_beamformee \
+ vht_txop_ps \
+ htc_vht \
+ rx_antenna_pattern \
+ tx_antenna_pattern
+ config_add_int vht_max_a_mpdu_len_exp vht_max_mpdu vht_link_adapt vht160 rx_stbc tx_stbc
+ config_add_boolean \
+ ldpc \
+ greenfield \
+ short_gi_20 \
+ short_gi_40 \
+ max_amsdu \
+ dsss_cck_40
}
drv_mac80211_init_iface_config() {
hostapd_common_add_bss_config
- config_add_string macaddr ifname
+ config_add_string 'macaddr:macaddr' ifname
config_add_boolean wds powersave
config_add_int maxassoc
config_add_int max_listen_int
- config_add_int dtim_interval
+ config_add_int dtim_period
+ config_add_int start_disabled
# mesh
+ config_add_string mesh_id
config_add_int $MP_CONFIG_INT
config_add_boolean $MP_CONFIG_BOOL
config_add_string $MP_CONFIG_STRING
}
+mac80211_add_capabilities() {
+ local __var="$1"; shift
+ local __mask="$1"; shift
+ local __out= oifs
+
+ oifs="$IFS"
+ IFS=:
+ for capab in "$@"; do
+ set -- $capab
+
+ [ "$(($4))" -gt 0 ] || continue
+ [ "$(($__mask & $2))" -eq "$((${3:-$2}))" ] || continue
+ __out="$__out[$1]"
+ done
+ IFS="$oifs"
+
+ export -n -- "$__var=$__out"
+}
+
mac80211_hostapd_setup_base() {
local phy="$1"
json_select config
[ "$auto_channel" -gt 0 ] && channel=acs_survey
+ [ "$auto_channel" -gt 0 ] && json_get_values channel_list channels
+
+ json_get_vars noscan ht_coex
+ json_get_values ht_capab_list ht_capab
+
+ ieee80211n=1
+ ht_capab=
+ case "$htmode" in
+ VHT20|HT20) ;;
+ HT40*|VHT40|VHT80|VHT160)
+ case "$hwmode" in
+ a)
+ case "$(( ($channel / 4) % 2 ))" in
+ 1) ht_capab="[HT40+]";;
+ 0) ht_capab="[HT40-]";;
+ esac
+ ;;
+ *)
+ case "$htmode" in
+ HT40+) ht_capab="[HT40+]";;
+ HT40-) ht_capab="[HT40-]";;
+ *)
+ if [ "$channel" -lt 7 ]; then
+ ht_capab="[HT40+]"
+ else
+ ht_capab="[HT40-]"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ [ "$auto_channel" -gt 0 ] && ht_capab="[HT40+]"
+ ;;
+ *) ieee80211n= ;;
+ esac
- [ "$enable_ht" -gt 0 ] && {
- json_get_vars noscan htmode
- json_get_values ht_capab_list ht_capab
-
+ [ -n "$ieee80211n" ] && {
append base_cfg "ieee80211n=1" "$N"
- ht_capab=
- [ -n "$htmode" ] && ht_capab="[$htmode]"
- for cap in $ht_capab_list; do
- ht_capab="$ht_capab[$cap]"
+ set_default ht_coex 0
+ append base_cfg "ht_coex=$ht_coex" "$N"
+
+ json_get_vars \
+ ldpc:1 \
+ greenfield:0 \
+ short_gi_20:1 \
+ short_gi_40:1 \
+ tx_stbc:1 \
+ rx_stbc:3 \
+ max_amsdu:1 \
+ dsss_cck_40:1
+
+ ht_cap_mask=0
+ for cap in $(iw phy "$phy" info | grep 'Capabilities:' | cut -d: -f2); do
+ ht_cap_mask="$(($ht_cap_mask | $cap))"
done
+ cap_rx_stbc=$((($ht_cap_mask >> 8) & 3))
+ [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
+ ht_cap_mask="$(( ($ht_cap_mask & ~(0x300)) | ($cap_rx_stbc << 8) ))"
+
+ mac80211_add_capabilities ht_capab_flags $ht_cap_mask \
+ LDPC:0x1::$ldpc \
+ GF:0x10::$greenfield \
+ SHORT-GI-20:0x20::$short_gi_20 \
+ SHORT-GI-40:0x40::$short_gi_40 \
+ TX-STBC:0x80::$tx_stbc \
+ RX-STBC1:0x300:0x100:1 \
+ RX-STBC12:0x300:0x200:1 \
+ RX-STBC123:0x300:0x300:1 \
+ MAX-AMSDU-7935:0x800::$max_amsdu \
+ DSSS_CCK-40:0x1000::$dsss_cck_40
+
+ ht_capab="$ht_capab$ht_capab_flags"
[ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
}
+ # 802.11ac
+ enable_ac=0
+ idx="$channel"
+ case "$htmode" in
+ VHT20) enable_ac=1;;
+ VHT40)
+ case "$(( ($channel / 4) % 2 ))" in
+ 1) idx=$(($channel + 2));;
+ 0) idx=$(($channel - 2));;
+ esac
+ enable_ac=1
+ append base_cfg "vht_oper_chwidth=0" "$N"
+ append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
+ ;;
+ VHT80)
+ case "$(( ($channel / 4) % 4 ))" in
+ 1) idx=$(($channel + 6));;
+ 2) idx=$(($channel + 2));;
+ 3) idx=$(($channel - 2));;
+ 0) idx=$(($channel - 6));;
+ esac
+ enable_ac=1
+ append base_cfg "vht_oper_chwidth=1" "$N"
+ append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
+ ;;
+ VHT160)
+ case "$channel" in
+ 36|40|44|48|52|56|60|64) idx=50;;
+ 100|104|108|112|116|120|124|128) idx=114;;
+ esac
+ enable_ac=1
+ append base_cfg "vht_oper_chwidth=2" "$N"
+ append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
+ ;;
+ esac
+
+ if [ "$enable_ac" != "0" ]; then
+ json_get_vars \
+ rxldpc:1 \
+ short_gi_80:1 \
+ short_gi_160:1 \
+ tx_stbc_2by1:1 \
+ su_beamformer:1 \
+ su_beamformee:1 \
+ mu_beamformer:1 \
+ mu_beamformee:1 \
+ vht_txop_ps:1 \
+ htc_vht:1 \
+ rx_antenna_pattern:1 \
+ tx_antenna_pattern:1 \
+ vht_max_a_mpdu_len_exp:7 \
+ vht_max_mpdu:11454 \
+ rx_stbc:4 \
+ vht_link_adapt:3 \
+ vht160:2
+
+ append base_cfg "ieee80211ac=1" "$N"
+ vht_cap=0
+ for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do
+ vht_cap="$(($vht_cap | $cap))"
+ done
+
+ cap_rx_stbc=$((($vht_cap >> 8) & 7))
+ [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
+ vht_cap="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))"
+
+ mac80211_add_capabilities vht_capab $vht_cap \
+ RXLDPC:0x10::$rxldpc \
+ SHORT-GI-80:0x20::$short_gi_80 \
+ SHORT-GI-160:0x40::$short_gi_160 \
+ TX-STBC-2BY1:0x80::$tx_stbc_2by1 \
+ SU-BEAMFORMER:0x800::$su_beamformer \
+ SU-BEAMFORMEE:0x1000::$su_beamformee \
+ MU-BEAMFORMER:0x80000::$mu_beamformer \
+ MU-BEAMFORMEE:0x100000::$mu_beamformee \
+ VHT-TXOP-PS:0x200000::$vht_txop_ps \
+ HTC-VHT:0x400000::$htc_vht \
+ RX-ANTENNA-PATTERN:0x10000000::$rx_antenna_pattern \
+ TX-ANTENNA-PATTERN:0x20000000::$tx_antenna_pattern \
+ RX-STBC-1:0x700:0x100:1 \
+ RX-STBC-12:0x700:0x200:1 \
+ RX-STBC-123:0x700:0x300:1 \
+ RX-STBC-1234:0x700:0x400:1 \
+
+ # supported Channel widths
+ vht160_hw=0
+ [ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \
+ vht160_hw=1
+ [ "$(($vht_cap & 12))" -eq 8 -a 2 -le "$vht160" ] && \
+ vht160_hw=2
+ [ "$vht160_hw" = 1 ] && vht_capab="$vht_capab[VHT160]"
+ [ "$vht160_hw" = 2 ] && vht_capab="$vht_capab[VHT160-80PLUS80]"
+
+ # maximum MPDU length
+ vht_max_mpdu_hw=3895
+ [ "$(($vht_cap & 3))" -ge 1 -a 7991 -le "$vht_max_mpdu" ] && \
+ vht_max_mpdu_hw=7991
+ [ "$(($vht_cap & 3))" -ge 2 -a 11454 -le "$vht_max_mpdu" ] && \
+ vht_max_mpdu_hw=11454
+ [ "$vht_max_mpdu_hw" != 3895 ] && \
+ vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]"
+
+ # maximum A-MPDU length exponent
+ vht_max_a_mpdu_len_exp_hw=0
+ [ "$(($vht_cap & 58720256))" -ge 8388608 -a 1 -le "$vht_max_a_mpdu_len_exp" ] && \
+ vht_max_a_mpdu_len_exp_hw=1
+ [ "$(($vht_cap & 58720256))" -ge 16777216 -a 2 -le "$vht_max_a_mpdu_len_exp" ] && \
+ vht_max_a_mpdu_len_exp_hw=2
+ [ "$(($vht_cap & 58720256))" -ge 25165824 -a 3 -le "$vht_max_a_mpdu_len_exp" ] && \
+ vht_max_a_mpdu_len_exp_hw=3
+ [ "$(($vht_cap & 58720256))" -ge 33554432 -a 4 -le "$vht_max_a_mpdu_len_exp" ] && \
+ vht_max_a_mpdu_len_exp_hw=4
+ [ "$(($vht_cap & 58720256))" -ge 41943040 -a 5 -le "$vht_max_a_mpdu_len_exp" ] && \
+ vht_max_a_mpdu_len_exp_hw=5
+ [ "$(($vht_cap & 58720256))" -ge 50331648 -a 6 -le "$vht_max_a_mpdu_len_exp" ] && \
+ vht_max_a_mpdu_len_exp_hw=6
+ [ "$(($vht_cap & 58720256))" -ge 58720256 -a 7 -le "$vht_max_a_mpdu_len_exp" ] && \
+ vht_max_a_mpdu_len_exp_hw=7
+ vht_capab="$vht_capab[MAX-A-MPDU-LEN-EXP$vht_max_a_mpdu_len_exp_hw]"
+
+ # whether or not the STA supports link adaptation using VHT variant
+ vht_link_adapt_hw=0
+ [ "$(($vht_cap & 201326592))" -ge 134217728 -a 2 -le "$vht_link_adapt" ] && \
+ vht_link_adapt_hw=2
+ [ "$(($vht_cap & 201326592))" -ge 201326592 -a 3 -le "$vht_link_adapt" ] && \
+ vht_link_adapt_hw=3
+ [ "$vht_link_adapt_hw" != 0 ] && \
+ vht_capab="$vht_capab[VHT-LINK-ADAPT-$vht_link_adapt_hw]"
+
+ [ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N"
+ fi
+
hostapd_prepare_device_config "$hostapd_conf_file" nl80211
cat >> "$hostapd_conf_file" <<EOF
${channel:+channel=$channel}
+${channel_list:+chanlist=$channel_list}
${noscan:+noscan=$noscan}
$base_cfg
append hostapd_cfg "$type=$ifname" "$N"
hostapd_set_bss_options hostapd_cfg "$vif" || return 1
- json_get_vars wds dtim_period max_listen_int
+ json_get_vars wds dtim_period max_listen_int start_disabled
+
+ set_default wds 0
+ set_default start_disabled 0
[ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
- [ "$staidx" -gt 0 ] && append hostapd_cfg "start_disabled=1" "$N"
+ [ "$staidx" -gt 0 -o "$start_disabled" -eq 1 ] && append hostapd_cfg "start_disabled=1" "$N"
cat >> /var/run/hostapd-$phy.conf <<EOF
$hostapd_cfg
EOF
}
+mac80211_get_addr() {
+ local phy="$1"
+ local idx="$(($2 + 1))"
+
+ head -n $(($macidx + 1)) /sys/class/ieee80211/${phy}/addresses | tail -n1
+}
+
mac80211_generate_mac() {
local phy="$1"
local id="${macidx:-0}"
local ref="$(cat /sys/class/ieee80211/${phy}/macaddress)"
local mask="$(cat /sys/class/ieee80211/${phy}/address_mask)"
- [ "$mask" = "00:00:00:00:00:00" ] && mask="ff:ff:ff:ff:ff:ff";
+ [ "$mask" = "00:00:00:00:00:00" ] && {
+ mask="ff:ff:ff:ff:ff:ff";
+
+ [ "$(wc -l < /sys/class/ieee80211/${phy}/addresses)" -gt 1 ] && {
+ addr="$(mac80211_get_addr "$phy" "$id")"
+ [ -n "$addr" ] && {
+ echo "$addr"
+ return
+ }
+ }
+ }
+
local oIFS="$IFS"; IFS=":"; set -- $mask; IFS="$oIFS"
local mask1=$1
find_phy() {
[ -n "$phy" -a -d /sys/class/ieee80211/$phy ] && return 0
- [ -n "$path" -a -d "/sys/devices/$path/ieee80211" ] && {
- phy="$(ls /sys/devices/$path/ieee80211 | grep -m 1 phy)"
- [ -n "$phy" ] && return 0
+ [ -n "$path" ] && {
+ for phy in $(ls /sys/class/ieee80211 2>/dev/null); do
+ case "$(readlink -f /sys/class/ieee80211/$phy/device)" in
+ *$path) return 0;;
+ esac
+ done
}
[ -n "$macaddr" ] && {
for phy in $(ls /sys/class/ieee80211 2>/dev/null); do
has_ap=1
}
+mac80211_iw_interface_add() {
+ local phy="$1"
+ local ifname="$2"
+ local type="$3"
+ local wdsflag="$4"
+ local rc
+
+ iw phy "$phy" interface add "$ifname" type "$type" $wdsflag
+ rc="$?"
+
+ [ "$rc" = 233 ] && {
+ # Device might have just been deleted, give the kernel some time to finish cleaning it up
+ sleep 1
+
+ iw phy "$phy" interface add "$ifname" type "$type" $wdsflag
+ rc="$?"
+ }
+
+ [ "$rc" = 233 ] && {
+ # Device might not support virtual interfaces, so the interface never got deleted in the first place.
+ # Check if the interface already exists, and avoid failing in this case.
+ ip link show dev "$ifname" >/dev/null 2>/dev/null && rc=0
+ }
+
+ [ "$rc" != 0 ] && wireless_setup_failed INTERFACE_CREATION_FAILED
+ return $rc
+}
+
mac80211_prepare_vif() {
json_select config
# It is far easier to delete and create the desired interface
case "$mode" in
adhoc)
- iw phy "$phy" interface add "$ifname" type adhoc
+ mac80211_iw_interface_add "$phy" "$ifname" adhoc || return
;;
ap)
# Hostapd will handle recreating the interface and
mac80211_hostapd_setup_bss "$phy" "$ifname" "$macaddr" "$type" || return
[ -n "$hostapd_ctrl" ] || {
- iw phy "$phy" interface add "$ifname" type managed
+ mac80211_iw_interface_add "$phy" "$ifname" __ap || return
hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd/$ifname}"
}
;;
mesh)
- json_get_vars key mesh_id
- if [ -n "$key" ]; then
- iw phy "$phy" interface add "$ifname" type mp
- else
- iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
- fi
+ mac80211_iw_interface_add "$phy" "$ifname" mp || return
;;
monitor)
- iw phy "$phy" interface add "$ifname" type monitor
+ mac80211_iw_interface_add "$phy" "$ifname" monitor || return
;;
sta)
local wdsflag=
staidx="$(($staidx + 1))"
[ "$wds" -gt 0 ] && wdsflag="4addr on"
- iw phy "$phy" interface add "$ifname" type managed $wdsflag
+ mac80211_iw_interface_add "$phy" "$ifname" managed "$wdsflag" || return
[ "$powersave" -gt 0 ] && powersave="on" || powersave="off"
iw "$ifname" set power_save "$powersave"
;;
# All interfaces must have unique mac addresses
# which can either be explicitly set in the device
# section, or automatically generated
- ifconfig "$ifname" hw ether "$macaddr"
+ ip link set dev "$ifname" address "$macaddr"
fi
json_select ..
wpa_supplicant_run "$ifname" ${hostapd_ctrl:+-H $hostapd_ctrl}
}
+mac80211_setup_adhoc_htmode() {
+ case "$htmode" in
+ VHT20|HT20) ibss_htmode=HT20;;
+ HT40*|VHT40|VHT160)
+ case "$hwmode" in
+ a)
+ case "$(( ($channel / 4) % 2 ))" in
+ 1) ibss_htmode="HT40+" ;;
+ 0) ibss_htmode="HT40-";;
+ esac
+ ;;
+ *)
+ case "$htmode" in
+ HT40+) ibss_htmode="HT40+";;
+ HT40-) ibss_htmode="HT40-";;
+ *)
+ if [ "$channel" -lt 7 ]; then
+ ibss_htmode="HT40+"
+ else
+ ibss_htmode="HT40-"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ [ "$auto_channel" -gt 0 ] && ibss_htmode="HT40+"
+ ;;
+ VHT80)
+ ibss_htmode="80MHZ"
+ ;;
+ NONE|NOHT)
+ ibss_htmode="NOHT"
+ ;;
+ *) ibss_htmode="" ;;
+ esac
+
+}
+
mac80211_setup_adhoc() {
- json_get_vars bssid ssid basic_rate key
+ json_get_vars bssid ssid key mcast_rate
keyspec=
- [ "$auth_type" == "wep" ] && {
+ [ "$auth_type" = "wep" ] && {
set_default key 1
case "$key" in
[1234])
}
brstr=
- for br in $basic_rate; do
- hostapd_add_rate brstr "$br"
+ for br in $basic_rate_list; do
+ wpa_supplicant_add_rate brstr "$br"
done
mcval=
- [ -n "$mcast_rate" ] && hostapd_add_rate mcval "$mcast_rate"
+ [ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
- iw dev "$ifname" ibss join "$ssid" $freq $htmode fixed-freq $bssid \
- ${beacon_int:+beacon-interval $beacon_int} \
+ iw dev "$ifname" ibss join "$ssid" $freq $ibss_htmode fixed-freq $bssid \
+ beacon-interval $beacon_int \
${brstr:+basic-rates $brstr} \
${mcval:+mcast-rate $mcval} \
${keyspec:+keys $keyspec}
mac80211_setup_vif() {
local name="$1"
+ local failed
json_select data
json_get_vars ifname
json_get_vars mode
json_get_var vif_txpower txpower
- ifconfig "$ifname" up || {
+ ip link set dev "$ifname" up || {
wireless_setup_vif_failed IFUP_ERROR
json_select ..
return
case "$mode" in
mesh)
+ # authsae or wpa_supplicant
+ json_get_vars key
+ if [ -n "$key" ]; then
+ if [ -e "/lib/wifi/authsae.sh" ]; then
+ . /lib/wifi/authsae.sh
+ authsae_start_interface || failed=1
+ else
+ wireless_vif_parse_encryption
+ mac80211_setup_supplicant || failed=1
+ fi
+ else
+ json_get_vars mesh_id mcast_rate
+
+ mcval=
+ [ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
+
+ case "$htmode" in
+ VHT20|HT20) mesh_htmode=HT20;;
+ HT40*|VHT40)
+ case "$hwmode" in
+ a)
+ case "$(( ($channel / 4) % 2 ))" in
+ 1) mesh_htmode="HT40+" ;;
+ 0) mesh_htmode="HT40-";;
+ esac
+ ;;
+ *)
+ case "$htmode" in
+ HT40+) mesh_htmode="HT40+";;
+ HT40-) mesh_htmode="HT40-";;
+ *)
+ if [ "$channel" -lt 7 ]; then
+ mesh_htmode="HT40+"
+ else
+ mesh_htmode="HT40-"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ VHT80)
+ mesh_htmode="80Mhz"
+ ;;
+ VHT160)
+ mesh_htmode="160Mhz"
+ ;;
+ *) mesh_htmode="NOHT" ;;
+ esac
+
+ freq="$(get_freq "$phy" "$channel")"
+ iw dev "$ifname" mesh join "$mesh_id" freq $freq $mesh_htmode \
+ ${mcval:+mcast-rate $mcval} \
+ beacon-interval $beacon_int
+ fi
+
for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do
json_get_var mp_val "$var"
[ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$var" "$mp_val"
done
- # todo: authsae
;;
adhoc)
wireless_vif_parse_encryption
+ mac80211_setup_adhoc_htmode
if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
mac80211_setup_supplicant || failed=1
else
local phy="$1"
for wdev in $(list_phy_interfaces "$phy"); do
- ifconfig "$wdev" down 2>/dev/null
+ ip link set dev "$wdev" down 2>/dev/null
iw dev "$wdev" del
done
}
country chanbw distance \
txpower antenna_gain \
rxantenna txantenna \
- frag rts beacon_int
+ frag rts beacon_int:100 htmode
+ json_get_values basic_rate_list basic_rate
json_select ..
find_phy || {
for_each_interface "ap" mac80211_prepare_vif
[ -n "$hostapd_ctrl" ] && {
- /usr/sbin/hostapd -P /var/run/wifi-$phy.pid -B "$hostapd_conf_file"
+ /usr/sbin/hostapd -s -P /var/run/wifi-$phy.pid -B "$hostapd_conf_file"
ret="$?"
wireless_add_process "$(cat /var/run/wifi-$phy.pid)" "/usr/sbin/hostapd" 1
[ "$ret" != 0 ] && {
projects / openwrt / openwrt.git / blobdiff