if PACKAGE_libopenssl
-config OPENSSL_WITH_EC
+comment "Build Options"
+
+config OPENSSL_OPTIMIZE_SPEED
+ bool
+ prompt "Enable optimization for speed instead of size"
+ select OPENSSL_WITH_ASM
+ help
+ Enabling this option increases code size (around 20%) and
+ performance. The increase in performance and size depends on the
+ target CPU. EC and AES seem to benefit the most, with EC speed
+ increased by 20%-50% (mipsel & x86).
+ AES-GCM is supposed to be 3x faster on x86. YMMV.
+
+config OPENSSL_WITH_ASM
bool
default y
- prompt "Enable elliptic curve support"
+ prompt "Compile with optimized assembly code"
+ depends on !arc
+ help
+ Disabling this option will reduce code size and performance.
+ The increase in performance and size depends on the target
+ CPU and on the algorithms being optimized. As of 1.1.0i*:
-config OPENSSL_WITH_EC2M
- bool
- depends on OPENSSL_WITH_EC
- prompt "Enable ec2m support"
+ Platform Pkg Inc. Algorithms where assembly is used - ~% Speed Increase
+ aarch64 174K BN, aes, sha1, sha256, sha512, nist256, poly1305
+ arm 152K BN, aes, sha1, sha256, sha512, nist256, poly1305
+ i386 183K BN+147%, aes+300%, rc4+55%, sha1+160%, sha256+114%, sha512+270%, nist256+282%, poly1305+292%
+ mipsel 1.5K BN+97%, aes+4%, sha1+94%, sha256+60%
+ mips64 3.7K BN, aes, sha1, sha256, sha512, poly1305
+ powerpc 20K BN, aes, sha1, sha256, sha512, poly1305
+ x86_64 228K BN+220%, aes+173%, rc4+38%, sha1+40%, sha256+64%, sha512+31%, nist256+354%, poly1305+228%
-config OPENSSL_WITH_SSL3
+ * Only most common algorithms shown. Your mileage may vary.
+ BN (bignum) performance was measured using RSA sign/verify.
+
+config OPENSSL_WITH_SSE2
bool
- default n
- prompt "Enable sslv3 support"
+ default y if !TARGET_x86_legacy && !TARGET_x86_geode
+ prompt "Enable use of x86 SSE2 instructions"
+ depends on OPENSSL_WITH_ASM && i386
+ help
+ Use of SSE2 instructions greatly increase performance (up to
+ 3x faster) with a minimum (~0.2%, or 23KB) increase in package
+ size, but it will bring no benefit if your hardware does not
+ support them, such as Geode GX and LX. In this case you may
+ save 23KB by saying yes here. AMD Geode NX, and Intel
+ Pentium 4 and above support SSE2.
config OPENSSL_WITH_DEPRECATED
bool
default y
- prompt "Include deprecated APIs"
+ prompt "Include deprecated APIs (See help for a list of packages that need this)"
+ help
+ Squid currently requires this.
config OPENSSL_NO_DEPRECATED
bool
default !OPENSSL_WITH_DEPRECATED
-config OPENSSL_WITH_DTLS
+config OPENSSL_WITH_ERROR_MESSAGES
bool
- default n
- prompt "Enable DTLS support"
+ prompt "Include error messages"
+ help
+ This option aids debugging, but increases package size and
+ memory usage.
-config OPENSSL_WITH_COMPRESSION
+comment "Protocol Support"
+
+config OPENSSL_WITH_DTLS
bool
- default n
- prompt "Enable compression support"
+ prompt "Enable DTLS support"
+ help
+ Datagram Transport Layer Security (DTLS) provides TLS-like security
+ for datagram-based (UDP, DCCP, CAPWAP, SCTP & SRTP) applications.
config OPENSSL_WITH_NPN
bool
default y
prompt "Enable NPN support"
+ help
+ NPN is a TLS extension, obsoleted and replaced with ALPN,
+ used to negotiate SPDY, and HTTP/2.
+
+config OPENSSL_WITH_SRP
+ bool
+ default y
+ prompt "Enable SRP support"
+ help
+ The Secure Remote Password protocol (SRP) is an augmented
+ password-authenticated key agreement (PAKE) protocol, specifically
+ designed to work around existing patents.
+
+config OPENSSL_WITH_CMS
+ bool
+ default y
+ prompt "Enable CMS (RFC 5652) support"
+ help
+ Cryptographic Message Syntax (CMS) is used to digitally sign,
+ digest, authenticate, or encrypt arbitrary message content.
+
+comment "Algorithm Selection"
+
+config OPENSSL_WITH_EC
+ bool
+ default y
+ prompt "Enable elliptic curve support"
+ help
+ Elliptic-curve cryptography (ECC) is an approach to public-key
+ cryptography based on the algebraic structure of elliptic curves
+ over finite fields. ECC requires smaller keys compared to non-ECC
+ cryptography to provide equivalent security.
+
+config OPENSSL_WITH_EC2M
+ bool
+ depends on OPENSSL_WITH_EC
+ prompt "Enable ec2m support"
+ help
+ This option enables the more efficient, yet less common, binary
+ field elliptic curves.
config OPENSSL_WITH_PSK
bool
default y
prompt "Enable PSK support"
+ help
+ Build support for Pre-Shared Key based cipher suites.
-config OPENSSL_WITH_SRP
+comment "Less commonly used build options"
+
+config OPENSSL_WITH_CAMELLIA
bool
- default y
- prompt "Enable SRP support"
+ prompt "Enable Camellia cipher support"
+ help
+ Camellia is a bock cipher with security levels and processing
+ abilities comparable to AES.
-config OPENSSL_ENGINE_DIGEST
+config OPENSSL_WITH_IDEA
bool
- depends on OPENSSL_ENGINE_CRYPTO
- prompt "Digests acceleration support"
+ prompt "Enable IDEA cipher support"
+ help
+ IDEA is a block cipher with 128-bit keys.
-config OPENSSL_HARDWARE_SUPPORT
+config OPENSSL_WITH_SEED
bool
- default n
- prompt "Enable hardware support"
+ prompt "Enable SEED cipher support"
+ help
+ SEED is a block cipher with 128-bit keys broadly used in
+ South Korea, but seldom found elsewhere.
-config OPENSSL_OPTIMIZE_SPEED
+config OPENSSL_WITH_MDC2
bool
- default n
- prompt "Enable optimization for speed instead of size"
+ prompt "Enable MDC2 digest support"
-endif
+config OPENSSL_WITH_WHIRLPOOL
+ bool
+ prompt "Enable Whirlpool digest support"
+
+config OPENSSL_WITH_COMPRESSION
+ bool
+ prompt "Enable compression support"
+ help
+ TLS compression is not recommended, as it is deemed insecure.
+ The CRIME attack exploits this weakness.
+ Even with this option turned on, it is disabled by default, and the
+ application must explicitly turn it on.
+
+config OPENSSL_WITH_RFC3779
+ bool
+ prompt "Enable RFC3779 support (BGP)"
+ help
+ RFC 3779 defines two X.509 v3 certificate extensions. The first
+ binds a list of IP address blocks, or prefixes, to the subject of a
+ certificate. The second binds a list of autonomous system
+ identifiers to the subject of a certificate. These extensions may be
+ used to convey the authorization of the subject to use the IP
+ addresses and autonomous system identifiers contained in the
+ extensions.
+
+comment "Engine/Hardware Support"
+
+config OPENSSL_ENGINE
+ bool "Enable engine support"
+ help
+ This enables alternative cryptography implementations,
+ most commonly for interfacing with external crypto devices,
+ or supporting new/alternative ciphers and digests.
config OPENSSL_ENGINE_CRYPTO
bool
- select OPENSSL_HARDWARE_SUPPORT
- prompt "Crypto acceleration support" if PACKAGE_libopenssl
+ select OPENSSL_ENGINE
+ select PACKAGE_kmod-cryptodev
+ prompt "Acceleration support through /dev/crypto"
+ help
+ This enables use of hardware acceleration through OpenBSD
+ Cryptodev API (/dev/crypto) interface.
+ You must install kmod-cryptodev (under Kernel modules, Cryptographic
+ API modules) for /dev/crypto to show up and use hardware
+ acceleration; otherwise it falls back to software.
+
+config OPENSSL_ENGINE_DIGEST
+ bool
+ depends on OPENSSL_ENGINE_CRYPTO
+ prompt "/dev/crypto digest (md5/sha1) acceleration support"
+
+config OPENSSL_WITH_GOST
+ bool
+ prompt "Prepare library for GOST engine"
+ depends on OPENSSL_ENGINE
+ help
+ This option prepares the library to accept engine support
+ for Russian GOST crypto algorithms.
+
+endif
+
projects / openwrt / openwrt.git / blobdiff