config_get mode "$vif" mode
case "$mode" in
- adhoc|sta|ap)
+ adhoc|ahdemo|sta|ap|monitor)
append $mode "$vif"
;;
wds)
- config_get addr "$vif" bssid
config_get ssid "$vif" ssid
- [ -z "$addr" -a -n "$ssid" ] && {
- config_set "$vif" wds 1
- config_set "$vif" mode sta
- mode="sta"
- addr="$ssid"
- }
+ [ -z "$ssid" ] && continue
+
+ config_set "$vif" wds 1
+ config_set "$vif" mode sta
+ mode="sta"
+ addr="$ssid"
${addr:+append $mode "$vif"}
;;
*) echo "$device($vif): Invalid mode, ignored."; continue;;
case "${adhoc:+1}:${sta:+1}:${ap+1}" in
# valid mode combinations
1::) wds="";;
+ 1::1);;
:1:1)config_set "$device" nosbeacon 1;; # AP+STA, can't use beacon timers for STA
:1:);;
::1);;
*) echo "$device: Invalid mode combination in config"; return 1;;
esac
- config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${wds:+$wds }"
+ config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${ahdemo:+$ahdemo }${sta:+$sta }${wds:+$wds }${monitor:+$monitor}"
}
disable_atheros() (
local device="$1"
+ set_wifi_down "$device"
# kill all running hostapd and wpa_supplicant processes that
# are running on atheros vifs
for pid in `pidof hostapd wpa_supplicant`; do
)
enable_atheros() {
+ local device="$1"
config_get channel "$device" channel
config_get vifs "$device" vifs
-
- disable_atheros "$device"
+
+ [ auto = "$channel" ] && channel=0
+
local first=1
for vif in $vifs; do
nosbeacon=
config_get ifname "$vif" ifname
config_get enc "$vif" encryption
+ config_get eap_type "$vif" eap_type
config_get mode "$vif" mode
[ "$mode" = sta ] && config_get nosbeacon "$device" nosbeacon
[ "$first" = 1 ] && {
# only need to change freq band and channel on the first vif
- config_get agmode "$device" mode
+ config_get agmode "$device" agmode
+ [ -z "$agmode" ] && config_get agmode "$device" mode
+
pureg=0
case "$agmode" in
*b) agmode=11b;;
*bg) agmode=11g;;
*g) agmode=11g; pureg=1;;
+ *gdt) agmode=11gdt;;
*a) agmode=11a;;
- *) agmode=11g;;
+ *adt) agmode=11adt;;
+ *ast) agmode=11ast;;
+ *fh) agmode=fh;;
+ *) agmode=auto;;
esac
- iwconfig "$ifname" channel 0
iwpriv "$ifname" mode "$agmode"
iwpriv "$ifname" pureg "$pureg"
- iwconfig "$ifname" channel "$channel"
+ iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
}
-
- config_get hidden "$vif" hidden
- [ -z "$hidden" ] || iwpriv "$ifname" hide_ssid "$hidden"
+
+ config_get_bool hidden "$vif" hidden 0
+ iwpriv "$ifname" hide_ssid "$hidden"
+
+ config_get ff "$vif" ff
+ if [ -n "$ff" ]; then
+ iwpriv "$ifname" ff "$ff"
+ fi
config_get wds "$vif" wds
case "$wds" in
esac
iwpriv "$ifname" wds "$wds"
+ [ "$mode" = ap -a "$wds" = 1 ] && {
+ config_get_bool wdssep "$vif" wdssep 1
+ [ -n "$wdssep" ] && iwpriv "$ifname" wdssep "$wdssep"
+ }
+
wpa=
case "$enc" in
WEP|wep)
iwconfig "$ifname" enc "[$idx]" "${key:-off}"
done
config_get key "$vif" key
- iwconfig "$ifname" enc "${key:-1}"
+ key="${key:-1}"
+ case "$key" in
+ [1234]) iwconfig "$ifname" enc "[$key]";;
+ *) iwconfig "$ifname" enc "$key";;
+ esac
+ ;;
+ PSK|psk|PSK2|psk2)
+ config_get key "$vif" key
;;
esac
case "$mode" in
- wds)
+ adhoc|ahdemo)
config_get addr "$vif" bssid
- iwpriv "$ifname" wds_add "$addr"
+ [ -z "$addr" ] || {
+ iwconfig "$ifname" ap "$addr"
+ }
+ ;;
+ esac
+ config_get ssid "$vif" ssid
+
+ config_get_bool bgscan "$vif" bgscan
+ [ -n "$bgscan" ] && iwpriv "$ifname" bgscan "$bgscan"
+
+ config_get_bool antdiv "$device" diversity
+ [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
+
+ config_get antrx "$device" rxantenna
+ [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
+
+ config_get anttx "$device" txantenna
+ [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
+
+ config_get distance "$device" distance
+ [ -n "$distance" ] && athctrl -i "$device" -d "$distance" >&-
+
+ config_get txpwr "$vif" txpower
+ [ -n "$txpwr" ] && iwconfig "$ifname" txpower "${txpwr%%.*}"
+
+ config_get rate "$vif" rate
+ [ -n "$rate" ] && iwconfig "$ifname" rate "${rate%%.*}"
+
+ config_get mcast_rate "$vif" mcast_rate
+ [ -n "$mcast_rate" ] && iwpriv "$ifname" mcast_rate "${mcast_rate%%.*}"
+
+ config_get frag "$vif" frag
+ [ -n "$frag" ] && iwconfig "$ifname" frag "${frag%%.*}"
+
+ config_get rts "$vif" rts
+ [ -n "$rts" ] && iwconfig "$ifname" rts "${rts%%.*}"
+
+ config_get_bool comp "$vif" compression
+ [ -n "$comp" ] && iwpriv "$ifname" compression "$comp"
+
+ config_get_bool minrate "$vif" minrate
+ [ -n "$minrate" ] && iwpriv "$ifname" minrate "$minrate"
+
+ config_get_bool maxrate "$vif" maxrate
+ [ -n "$maxrate" ] && iwpriv "$ifname" maxrate "$maxrate"
+
+ config_get_bool burst "$vif" bursting
+ [ -n "$burst" ] && iwpriv "$ifname" burst "$burst"
+
+ config_get_bool wmm "$vif" wmm
+ [ -n "$wmm" ] && iwpriv "$ifname" wmm "$wmm"
+
+ config_get_bool xr "$vif" xr
+ [ -n "$xr" ] && iwpriv "$ifname" xr "$xr"
+
+ config_get_bool ar "$vif" ar
+ [ -n "$ar" ] && iwpriv "$ifname" ar "$ar"
+
+ config_get_bool turbo "$vif" turbo
+ [ -n "$turbo" ] && iwpriv "$ifname" turbo "$turbo"
+
+ config_get_bool doth "$vif" doth 0
+ [ -n "$doth" ] && iwpriv "$ifname" doth "$doth"
+
+ config_get maclist "$vif" maclist
+ [ -n "$maclist" ] && {
+ # flush MAC list
+ iwpriv "$ifname" maccmd 3
+ for mac in $maclist; do
+ iwpriv "$ifname" addmac "$mac"
+ done
+ }
+
+ config_get macpolicy "$vif" macpolicy
+ case "$macpolicy" in
+ allow)
+ iwpriv "$ifname" maccmd 1
+ ;;
+ deny)
+ iwpriv "$ifname" maccmd 2
;;
*)
- config_get ssid "$vif" ssid
+ # default deny policy if mac list exists
+ [ -n "$maclist" ] && iwpriv "$ifname" maccmd 2
;;
esac
+
ifconfig "$ifname" up
-
local net_cfg bridge
net_cfg="$(find_net_config "$vif")"
[ -z "$net_cfg" ] || {
start_net "$ifname" "$net_cfg"
}
iwconfig "$ifname" essid "$ssid"
+ set_wifi_up "$vif" "$ifname"
case "$mode" in
ap)
- hostapd_setup_vif "$vif" madwifi || {
- echo "enable_atheros($device): Failed to set up wpa for interface $ifname" >&2
- # make sure this wifi interface won't accidentally stay open without encryption
- ifconfig "$ifname" down
- wlanconfig "$ifname" destroy
- continue
- }
+ config_get_bool isolate "$vif" isolate 0
+ iwpriv "$ifname" ap_bridge "$((isolate^1))"
+
+ if eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
+ hostapd_setup_vif "$vif" madwifi || {
+ echo "enable_atheros($device): Failed to set up wpa for interface $ifname" >&2
+ # make sure this wifi interface won't accidentally stay open without encryption
+ ifconfig "$ifname" down
+ wlanconfig "$ifname" destroy
+ continue
+ }
+ fi
;;
wds|sta)
- # FIXME: implement wpa_supplicant calls here
+ config_get_bool usepassphrase "$vif" passphrase 1
+ case "$enc" in
+ PSK|psk|PSK2|psk2)
+ case "$enc" in
+ PSK|psk)
+ proto='proto=WPA'
+ if [ "$usepassphrase" = "1" ]; then
+ passphrase="psk=\"${key}\""
+ else
+ passphrase="psk=${key}"
+ fi
+ ;;
+ PSK2|psk2)
+ proto='proto=RSN'
+ if [ "$usepassphrase" = "1" ]; then
+ passphrase="psk=\"${key}\""
+ else
+ passphrase="psk=${key}"
+ fi
+ ;;
+ esac
+ cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
+network={
+ scan_ssid=1
+ ssid="$ssid"
+ key_mgmt=WPA-PSK
+ $proto
+ $passphrase
+}
+EOF
+ ;;
+ WPA|wpa|WPA2|wpa2i|8021x|8021X)
+ config_get ca_cert "$vif" ca_cert
+ eap_type=$(echo $eap_type | tr 'a-z' 'A-Z')
+ case "$eap_type" in
+ tls|TLS)
+ proto='proto=WPA2'
+ pairwise='pairwise=CCMP'
+ group='group=CCMP'
+ config_get priv_key "$vif" priv_key
+ config_get priv_key_pwd "$vif" priv_key_pwd
+ priv_key="private_key=\"$priv_key\""
+ priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
+ ;;
+ peap|PEAP|ttls|TTLS)
+ proto='proto=WPA2'
+ config_get auth "$vif" auth
+ config_get identity "$vif" identity
+ config_get password "$vif" password
+ phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
+ identity="identity=\"$identity\""
+ password="password=\"$password\""
+ ;;
+ esac
+ cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
+network={
+ scan_ssid=1
+ ssid="$ssid"
+ key_mgmt=WPA-EAP
+ $proto
+ $pairwise
+ $group
+ eap=$eap_type
+ ca_cert="$ca_cert"
+ $priv_key
+ $priv_key_pwd
+ $phase2
+ $identity
+ $password
+}
+EOF
+ ;;
+ esac
+ [ -z "$proto" ] || wpa_supplicant ${bridge:+ -b $bridge} -B -D madwifi -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
;;
esac
first=0
detect_atheros() {
cd /proc/sys/dev
[ -d ath ] || return
- for dev in wifi*; do
+ for dev in $(ls -d wifi* 2>&-); do
config_get type "$dev" type
[ "$type" = atheros ] && return
cat <<EOF
config wifi-device $dev
option type atheros
- option channel 5
+ option channel auto
+
+ # REMOVE THIS LINE TO ENABLE WIFI:
+ option disabled 1
config wifi-iface
- option device $dev
-# option network lan
- option mode ap
- option ssid OpenWrt
- option hidden 0
+ option device $dev
+ option network lan
+ option mode ap
+ option ssid OpenWrt
option encryption none
-
EOF
done
}
-
projects / openwrt / openwrt.git / blobdiff