setup_interface () {
local device="$1"
+ local prefsig=""
+ local addrsig=""
+
+ # Apply IPv6 / ND configuration
+ HOPLIMIT=$(cat /proc/sys/net/ipv6/conf/$device/hop_limit)
+ [ -n "$RA_HOPLIMIT" -a -n "$HOPLIMIT" ] && [ "$RA_HOPLIMIT" -gt "$HOPLIMIT" ] && echo "$RA_HOPLIMIT" > /proc/sys/net/ipv6/conf/$device/hop_limit
+ [ -n "$RA_MTU" ] && [ "$RA_MTU" -ge 1280 ] && echo "$RA_MTU" > /proc/sys/net/ipv6/conf/$device/mtu 2>/dev/null
+ [ -n "$RA_REACHABLE" ] && [ "$RA_REACHABLE" -gt 0 ] && echo "$RA_REACHABLE" > /proc/sys/net/ipv6/neigh/$device/base_reachable_time_ms
+ [ -n "$RA_RETRANSMIT" ] && [ "$RA_RETRANSMIT" -gt 0 ] && echo "$RA_RETRANSMIT" > /proc/sys/net/ipv6/neigh/$device/retrans_time_ms
+
proto_init_update "*" 1
# Merge RA-DNS
proto_add_dns_server "$dns"
done
+ for radomain in $RA_DOMAINS; do
+ local duplicate=0
+ for domain in $DOMAINS; do
+ [ "$radomain" = "$domain" ] && duplicate=1
+ done
+ [ "$duplicate" = 0 ] && DOMAINS="$DOMAINS $radomain"
+ done
+
for domain in $DOMAINS; do
proto_add_dns_search "$domain"
done
for prefix in $PREFIXES; do
proto_add_ipv6_prefix "$prefix"
+ prefsig="$prefsig ${prefix%%,*}"
+ local entry="${prefix#*/}"
+ entry="${entry#*,}"
+ entry="${entry#*,}"
+ local valid="${entry%%,*}"
+
+ if [ -z "$RA_ADDRESSES" -a -z "$RA_ROUTES" -a \
+ -z "$RA_DNS" -a "$FAKE_ROUTES" = 1 ]; then
+ RA_ROUTES="::/0,$SERVER,$valid,4096"
+ fi
done
- [ -n "$USERPREFIX" ] && proto_add_ipv6_prefix "$USERPREFIX"
+ for prefix in $USERPREFIX; do
+ proto_add_ipv6_prefix "$prefix"
+ done
# Merge addresses
for entry in $RA_ADDRESSES; do
entry="${entry#*,}"
local valid="${entry%%,*}"
- proto_add_ipv6_address "$addr" "$mask" "$preferred" "$valid"
+ proto_add_ipv6_address "$addr" "$mask" "$preferred" "$valid" 1
+ addrsig="$addrsig $addr/$mask"
+
+ if [ -z "$RA_ADDRESSES" -a -z "$RA_ROUTES" -a \
+ -z "$RA_DNS" -a "$FAKE_ROUTES" = 1 ]; then
+ RA_ROUTES="::/0,$SERVER,$valid,4096"
+ fi
+
+ # RFC 7278
+ if [ "$mask" -eq 64 -a -z "$PREFIXES" -a -n "$EXTENDPREFIX" ]; then
+ proto_add_ipv6_prefix "$addr/$mask,$preferred,$valid"
+
+ local raroutes=""
+ for route in $RA_ROUTES; do
+ local prefix="${route%%/*}"
+ local entry="${route#*/}"
+ local pmask="${entry%%,*}"
+ entry="${entry#*,}"
+ local gw="${entry%%,*}"
+
+ [ -z "$gw" -a "$mask" = "$pmask" ] && {
+ case "$addr" in
+ "${prefix%*::}"*) continue;;
+ esac
+ }
+ raroutes="$raroutes $route"
+ done
+ RA_ROUTES="$raroutes"
+ fi
done
for entry in $RA_ROUTES; do
+ local duplicate=$NOSOURCEFILTER
local addr="${entry%%/*}"
entry="${entry#*/}"
local mask="${entry%%,*}"
entry="${entry#*,}"
local metric="${entry%%,*}"
- if [ -z "$SOURCE_ROUTING" -o -z "$gw" ]; then
+ for xentry in $RA_ROUTES; do
+ local xprefix="${xentry%%,*}"
+ xentry="${xentry#*,}"
+ local xgw="${xentry%%,*}"
+
+ [ -n "$gw" -a -z "$xgw" -a "$addr/$mask" = "$xprefix" ] && duplicate=1
+ done
+
+ if [ -z "$gw" -o "$duplicate" = 1 ]; then
proto_add_ipv6_route "$addr" "$mask" "$gw" "$metric" "$valid"
else
- proto_add_ipv6_route "$addr" "$mask" "$gw" "$metric" "$valid" "::/128"
for prefix in $PREFIXES $ADDRESSES; do
local paddr="${prefix%%,*}"
proto_add_ipv6_route "$addr" "$mask" "$gw" "$metric" "$valid" "$paddr"
fi
done
+ proto_add_data
+ [ -n "$CER" ] && json_add_string cer "$CER"
+ [ -n "$PASSTHRU" ] && json_add_string passthru "$PASSTHRU"
+ [ -n "$ZONE" ] && json_add_string zone "$ZONE"
+ proto_close_data
+
proto_send_update "$INTERFACE"
- if [ -n "$AFTR_IP " -a -n "$IFACE_DSLITE" ]; then
+ MAPTYPE=""
+ MAPRULE=""
+
+ if [ -n "$MAPE" -a -f /lib/netifd/proto/map.sh ]; then
+ MAPTYPE="map-e"
+ MAPRULE="$MAPE"
+ elif [ -n "$MAPT" -a -f /lib/netifd/proto/map.sh -a -f /proc/net/nat46/control ]; then
+ MAPTYPE="map-t"
+ MAPRULE="$MAPT"
+ elif [ -n "$LW4O6" -a -f /lib/netifd/proto/map.sh ]; then
+ MAPTYPE="lw4o6"
+ MAPRULE="$LW4O6"
+ fi
+
+ [ -n "$ZONE" ] || ZONE=$(fw3 -q network $INTERFACE 2>/dev/null)
+
+ if [ "$IFACE_MAP" != 0 -a -n "$MAPTYPE" -a -n "$MAPRULE" ]; then
+ [ -z "$IFACE_MAP" -o "$IFACE_MAP" = 1 ] && IFACE_MAP=${INTERFACE}_4
+ json_init
+ json_add_string name "$IFACE_MAP"
+ json_add_string ifname "@$INTERFACE"
+ json_add_string proto map
+ json_add_string type "$MAPTYPE"
+ json_add_string _prefsig "$prefsig"
+ [ "$MAPTYPE" = lw4o6 ] && json_add_string _addrsig "$addrsig"
+ json_add_string rule "$MAPRULE"
+ json_add_string tunlink "$INTERFACE"
+ [ -n "$ZONE_MAP" ] || ZONE_MAP=$ZONE
+ [ -n "$ZONE_MAP" ] && json_add_string zone "$ZONE_MAP"
+ [ -n "$ENCAPLIMIT_MAP" ] && json_add_string encaplimit "$ENCAPLIMIT_MAP"
+ [ -n "$IFACE_MAP_DELEGATE" ] && json_add_boolean delegate "$IFACE_MAP_DELEGATE"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ elif [ -n "$AFTR" -a "$IFACE_DSLITE" != 0 -a -f /lib/netifd/proto/dslite.sh ]; then
+ [ -z "$IFACE_DSLITE" -o "$IFACE_DSLITE" = 1 ] && IFACE_DSLITE=${INTERFACE}_4
json_init
json_add_string name "$IFACE_DSLITE"
json_add_string ifname "@$INTERFACE"
json_add_string proto "dslite"
- json_add_string peeraddr "$AFTR_IP"
+ json_add_string peeraddr "$AFTR"
json_add_string tunlink "$INTERFACE"
+ [ -n "$ZONE_DSLITE" ] || ZONE_DSLITE=$ZONE
+ [ -n "$ZONE_DSLITE" ] && json_add_string zone "$ZONE_DSLITE"
+ [ -n "$ENCAPLIMIT_DSLITE" ] && json_add_string encaplimit "$ENCAPLIMIT_DSLITE"
+ [ -n "$IFACE_DSLITE_DELEGATE" ] && json_add_boolean delegate "$IFACE_DSLITE_DELEGATE"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ elif [ "$IFACE_464XLAT" != 0 -a -f /lib/netifd/proto/464xlat.sh ]; then
+ [ -z "$IFACE_464XLAT" -o "$IFACE_464XLAT" = 1 ] && IFACE_464XLAT=${INTERFACE}_4
+ json_init
+ json_add_string name "$IFACE_464XLAT"
+ json_add_string ifname "@$INTERFACE"
+ json_add_string proto "464xlat"
+ json_add_string tunlink "$INTERFACE"
+ json_add_string _addrsig "$addrsig"
+ [ -n "$ZONE_464XLAT" ] || ZONE_464XLAT=$ZONE
+ [ -n "$ZONE_464XLAT" ] && json_add_string zone "$ZONE_464XLAT"
+ [ -n "$IFACE_464XLAT_DELEGATE" ] && json_add_boolean delegate "$IFACE_464XLAT_DELEGATE"
json_close_object
ubus call network add_dynamic "$(json_dump)"
fi
teardown_interface "$1"
setup_interface "$1"
;;
- informed|updated|rebound|ra-updated)
+ informed|updated|rebound)
setup_interface "$1"
;;
+ ra-updated)
+ [ -n "$ADDRESSES$RA_ADDRESSES$PREFIXES$USERPREFIX" ] && setup_interface "$1"
+ ;;
started|stopped|unbound)
teardown_interface "$1"
;;
esac
# user rules
-[ -f /etc/odhcp6c.user ] && . /etc/odhcp6c.user
+[ -f /etc/odhcp6c.user ] && . /etc/odhcp6c.user "$@"
exit 0
projects / openwrt / openwrt.git / blobdiff