. /lib/functions/network.sh
+. /lib/functions.sh
wpa_supplicant_add_rate() {
local var="$1"
;;
eap192)
append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+ [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
;;
eap-eap192)
append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
append wpa_key_mgmt "OWE"
;;
esac
+
+ [ "$auth_osen" = "1" ] && append wpa_key_mgmt "OSEN"
}
hostapd_add_log_config() {
config_add_string country
config_add_boolean country_ie doth
+ config_add_boolean spectrum_mgmt_required
+ config_add_int local_pwr_constraint
config_add_string require_mode
config_add_boolean legacy_rates
local base="${config%%.conf}"
local base_cfg=
- json_get_vars country country_ie beacon_int:100 doth require_mode legacy_rates acs_chan_bias
+ json_get_vars country country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
+ acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode
hostapd_set_log_options base_cfg
set_default country_ie 1
+ set_default spectrum_mgmt_required 0
set_default doth 1
set_default legacy_rates 1
+ set_default airtime_mode 0
[ "$hwmode" = "b" ] && legacy_rates=1
[ -n "$country" ] && {
append base_cfg "country_code=$country" "$N"
- [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
+ [ "$country_ie" -gt 0 ] && {
+ append base_cfg "ieee80211d=1" "$N"
+ [ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N"
+ [ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N"
+ }
[ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
}
[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
append base_cfg "beacon_int=$beacon_int" "$N"
+ append base_cfg "dtim_period=$dtim_period" "$N"
+ [ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
json_get_values opts hostapd_options
for val in $opts; do
config_add_int \
wep_rekey eap_reauth_period \
wpa_group_rekey wpa_pair_rekey wpa_master_rekey
+ config_add_boolean wpa_strict_rekey
config_add_boolean wpa_disable_eapol_key_retries
config_add_boolean tdls_prohibit
config_add_int eapol_version
config_add_string 'auth_server:host' 'server:host'
- config_add_string auth_secret
+ config_add_string auth_secret key
config_add_int 'auth_port:port' 'port:port'
config_add_string acct_server
config_add_string radius_client_addr
config_add_string iapp_interface
config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
+ config_add_boolean ca_cert_usesystem ca_cert2_usesystem
+ config_add_string subject_match subject_match2
+ config_add_array altsubject_match altsubject_match2
+ config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2
config_add_string ieee80211w_mgmt_cipher
config_add_int dynamic_vlan vlan_naming
config_add_int mcast_rate
config_add_array basic_rate
config_add_array supported_rates
-
+
config_add_boolean sae_require_mfp
-
+
config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string'
+
+ config_add_boolean hs20 disable_dgaf osen
+ config_add_int anqp_domain_id
+ config_add_int hs20_deauth_req_timeout
+ config_add_array hs20_oper_friendly_name
+ config_add_array osu_provider
+ config_add_array operator_icon
+ config_add_array hs20_conn_capab
+ config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
+
+ config_add_int airtime_bss_weight airtime_bss_limit
+}
+
+hostapd_set_vlan_file() {
+ local ifname="$1"
+ local vlan="$2"
+ json_get_vars name vid
+ echo "${vid} ${ifname}-${name}" >> /var/run/hostapd-${ifname}.vlan
+ wireless_add_vlan "${vlan}" "${ifname}-${name}"
+}
+
+hostapd_set_vlan() {
+ local ifname="$1"
+
+ rm -f /var/run/hostapd-${ifname}.vlan
+ for_each_vlan hostapd_set_vlan_file ${ifname}
+}
+
+hostapd_set_psk_file() {
+ local ifname="$1"
+ local vlan="$2"
+ local vlan_id=""
+
+ json_get_vars mac vid key
+ set_default mac "00:00:00:00:00:00"
+ [ -n "$vid" ] && vlan_id="vlanid=$vid "
+ echo "${vlan_id} ${mac} ${key}" >> /var/run/hostapd-${ifname}.psk
+}
+
+hostapd_set_psk() {
+ local ifname="$1"
+
+ rm -f /var/run/hostapd-${ifname}.psk
+ for_each_station hostapd_set_psk_file ${ifname}
+}
+
+append_hs20_oper_friendly_name() {
+ append bss_conf "hs20_oper_friendly_name=$1" "$N"
+}
+
+append_osu_provider_service_desc() {
+ append bss_conf "osu_service_desc=$1" "$N"
+}
+
+append_hs20_icon() {
+ local width height lang type path
+ config_get width "$1" width
+ config_get height "$1" height
+ config_get lang "$1" lang
+ config_get type "$1" type
+ config_get path "$1" path
+
+ append bss_conf "hs20_icon=$width:$height:$lang:$type:$1:$path" "$N"
+}
+
+append_hs20_icons() {
+ config_load wireless
+ config_foreach append_hs20_icon hs20-icon
+}
+
+append_operator_icon() {
+ append bss_conf "operator_icon=$1" "$N"
+}
+
+append_osu_icon() {
+ append bss_conf "osu_icon=$1" "$N"
+}
+
+append_osu_provider() {
+ local cfgtype osu_server_uri osu_friendly_name osu_nai osu_nai2 osu_method_list
+
+ config_load wireless
+ config_get cfgtype "$1" TYPE
+ [ "$cfgtype" != "osu-provider" ] && return
+
+ append bss_conf "# provider $1" "$N"
+ config_get osu_server_uri "$1" osu_server_uri
+ config_get osu_nai "$1" osu_nai
+ config_get osu_nai2 "$1" osu_nai2
+ config_get osu_method_list "$1" osu_method
+
+ append bss_conf "osu_server_uri=$osu_server_uri" "$N"
+ append bss_conf "osu_nai=$osu_nai" "$N"
+ append bss_conf "osu_nai2=$osu_nai2" "$N"
+ append bss_conf "osu_method_list=$osu_method_list" "$N"
+
+ config_list_foreach "$1" osu_service_desc append_osu_provider_service_desc
+ config_list_foreach "$1" osu_icon append_osu_icon
+
+ append bss_conf "$N"
+}
+
+append_hs20_conn_capab() {
+ [ -n "$1" ] && append bss_conf "hs20_conn_capab=$1" "$N"
}
hostapd_set_bss_options() {
wireless_vif_parse_encryption
- local bss_conf
+ local bss_conf bss_md5sum
local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
json_get_vars \
- wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
+ wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_strict_rekey \
wpa_disable_eapol_key_retries tdls_prohibit \
maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
acct_server acct_secret acct_port acct_interval \
bss_load_update_period chan_util_avg_period sae_require_mfp \
- multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key
+ multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key \
+ airtime_bss_weight airtime_bss_limit
set_default isolate 0
set_default maxassoc 0
set_default chan_util_avg_period 600
set_default utf8_ssid 1
set_default multi_ap 0
+ set_default airtime_bss_weight 0
+ set_default airtime_bss_limit 0
append bss_conf "ctrl_interface=/var/run/hostapd"
if [ "$isolate" -gt 0 ]; then
append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
fi
+ [ "$airtime_bss_weight" -gt 0 ] && append bss_conf "airtime_bss_weight=$airtime_bss_weight" "$N"
+ [ "$airtime_bss_limit" -gt 0 ] && append bss_conf "airtime_bss_limit=$airtime_bss_limit" "$N"
+
append bss_conf "bss_load_update_period=$bss_load_update_period" "$N"
append bss_conf "chan_util_avg_period=$chan_util_avg_period" "$N"
append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
[ -n "$wpa_group_rekey" ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
[ -n "$wpa_pair_rekey" ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
[ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N"
+ [ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
}
[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
;;
psk|sae|psk-sae)
json_get_vars key wpa_psk_file
- if [ ${#key} -lt 8 ]; then
- wireless_setup_vif_failed INVALID_WPA_PSK
- return 1
- elif [ ${#key} -eq 64 ]; then
+ if [ ${#key} -eq 64 ]; then
append bss_conf "wpa_psk=$key" "$N"
- else
+ elif [ ${#key} -ge 8 ] && [ ${#key} -le 63 ]; then
append bss_conf "wpa_passphrase=$key" "$N"
+ elif [ -n "$key" ] || [ -z "$wpa_psk_file" ]; then
+ wireless_setup_vif_failed INVALID_WPA_PSK
+ return 1
fi
+ [ -z "$wpa_psk_file" ] && set_default wpa_psk_file /var/run/hostapd-$ifname.psk
[ -n "$wpa_psk_file" ] && {
[ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
}
[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
+ set_default dynamic_vlan 0
+ vlan_possible=1
wps_possible=1
;;
eap|eap192|eap-eap192)
append bss_conf "bss_transition=$bss_transition" "$N"
fi
- json_get_vars ieee80211k
+ json_get_vars ieee80211k rrm_neighbor_report rrm_beacon_report
set_default ieee80211k 0
if [ "$ieee80211k" -eq "1" ]; then
- json_get_vars rrm_neighbor_report rrm_beacon_report
-
set_default rrm_neighbor_report 1
set_default rrm_beacon_report 1
- append bss_conf "rrm_neighbor_report=$rrm_neighbor_report" "$N"
- append bss_conf "rrm_beacon_report=$rrm_beacon_report" "$N"
fi
+ [ "$rrm_neighbor_report" -eq "1" ] && append bss_conf "rrm_neighbor_report=1" "$N"
+ [ "$rrm_beacon_report" -eq "1" ] && append bss_conf "rrm_beacon_report=1" "$N"
+
if [ "$wpa" -ge "1" ]; then
json_get_vars ieee80211r
set_default ieee80211r 0
json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
- set_default ft_psk_generate_local 1
set_default ft_over_ds 1
set_default reassociation_deadline 1000
+ case "$auth_type" in
+ psk|sae|psk-sae)
+ set_default ft_psk_generate_local 1
+ ;;
+ *)
+ set_default ft_psk_generate_local 0
+ ;;
+ esac
+
append bss_conf "mobility_domain=$mobility_domain" "$N"
append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
append bss_conf "ft_over_ds=$ft_over_ds" "$N"
[ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file
set_default vlan_naming 1
+ [ -z "$vlan_file" ] && set_default vlan_file /var/run/hostapd-$ifname.vlan
append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
append bss_conf "vlan_naming=$vlan_naming" "$N"
[ -n "$vlan_bridge" ] && \
}
}
+ local hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
+ osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
+ json_get_vars hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
+ osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
+
+ set_default hs20 0
+ set_default disable_dgaf $hs20
+ set_default osen 0
+ set_default anqp_domain_id 0
+ set_default hs20_deauth_req_timeout 60
+ if [ "$hs20" = "1" ]; then
+ append bss_conf "hs20=1" "$N"
+ append_hs20_icons
+ append bss_conf "disable_dgaf=$disable_dgaf" "$N"
+ append bss_conf "osen=$osen" "$N"
+ append bss_conf "anqp_domain_id=$anqp_domain_id" "$N"
+ append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
+ [ -n "$osu_ssid" ] && append bss_conf "osu_ssid=$osu_ssid" "$N"
+ [ -n "$hs20_wan_metrics" ] && append bss_conf "hs20_wan_metrics=$hs20_wan_metrics" "$N"
+ [ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N"
+ [ -n "$hs20_t_c_filename" ] && append bss_conf "hs20_t_c_filename=$hs20_t_c_filename" "$N"
+ [ -n "$hs20_t_c_timestamp" ] && append bss_conf "hs20_t_c_timestamp=$hs20_t_c_timestamp" "$N"
+ json_for_each_item append_hs20_conn_capab hs20_conn_capab
+ json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name
+ json_for_each_item append_osu_provider osu_provider
+ json_for_each_item append_operator_icon operator_icon
+ fi
+
+ bss_md5sum=$(echo $bss_conf | md5sum | cut -d" " -f1)
+ append bss_conf "config_id=$bss_md5sum" "$N"
+
append "$var" "$bss_conf" "$N"
return 0
}
local ap_scan=
_w_mode="$mode"
- _w_modestr=
- [[ "$mode" = adhoc ]] && {
+ [ "$mode" = adhoc ] && {
ap_scan="ap_scan=2"
-
- _w_modestr="mode=1"
}
local country_str=
fi
wpa_supplicant_teardown_interface "$ifname"
cat > "$_config" <<EOF
+${scan_list:+freq_list=$scan_list}
$ap_scan
$country_str
EOF
case "$htmode" in
VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
- *) append network_data "max_oper_chwidth=0" "$N$T";;
+ VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";;
+ *) append network_data "disable_vht=1" "$N$T";;
esac
}
local scan_ssid="scan_ssid=1"
local freq wpa_key_mgmt
- [[ "$_w_mode" = "adhoc" ]] && {
+ [ "$_w_mode" = "adhoc" ] && {
append network_data "mode=1" "$N$T"
[ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
+ [ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
scan_ssid="scan_ssid=0"
[ "$_w_driver" = "nl80211" ] || append wpa_key_mgmt "WPA-NONE"
}
- [[ "$_w_mode" = "mesh" ]] && {
+ [ "$_w_mode" = "mesh" ] && {
json_get_vars mesh_id mesh_fwding mesh_rssi_threshold
[ -n "$mesh_id" ] && ssid="${mesh_id}"
scan_ssid=""
}
- [ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ] && append network_data "$_w_modestr" "$N$T"
-
[ "$multi_ap" = 1 -a "$_w_mode" = "sta" ] && append network_data "multi_ap_backhaul_sta=1" "$N$T"
case "$auth_type" in
hostapd_append_wpa_key_mgmt
key_mgmt="$wpa_key_mgmt"
- json_get_vars eap_type identity anonymous_identity ca_cert
- [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
+ json_get_vars eap_type identity anonymous_identity ca_cert ca_cert_usesystem
+
+ if [ "$ca_cert_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
+ append network_data "ca_cert=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
+ else
+ [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
+ fi
[ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
[ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
case "$eap_type" in
append network_data "client_cert=\"$client_cert\"" "$N$T"
append network_data "private_key=\"$priv_key\"" "$N$T"
append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
+
+ json_get_vars subject_match
+ [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
+
+ json_get_values altsubject_match altsubject_match
+ if [ -n "$altsubject_match" ]; then
+ local list=
+ for x in $altsubject_match; do
+ append list "$x" ";"
+ done
+ append network_data "altsubject_match=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_match domain_match
+ if [ -n "$domain_match" ]; then
+ local list=
+ for x in $domain_match; do
+ append list "$x" ";"
+ done
+ append network_data "domain_match=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_suffix_match domain_suffix_match
+ if [ -n "$domain_suffix_match" ]; then
+ local list=
+ for x in $domain_suffix_match; do
+ append list "$x" ";"
+ done
+ append network_data "domain_suffix_match=\"$list\"" "$N$T"
+ fi
;;
fast|peap|ttls)
- json_get_vars auth password ca_cert2 client_cert2 priv_key2 priv_key2_pwd
+ json_get_vars auth password ca_cert2 ca_cert2_usesystem client_cert2 priv_key2 priv_key2_pwd
set_default auth MSCHAPV2
if [ "$auth" = "EAP-TLS" ]; then
- [ -n "$ca_cert2" ] &&
- append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
+ if [ "$ca_cert2_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
+ append network_data "ca_cert2=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
+ else
+ [ -n "$ca_cert2" ] && append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
+ fi
append network_data "client_cert2=\"$client_cert2\"" "$N$T"
append network_data "private_key2=\"$priv_key2\"" "$N$T"
append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
append network_data "password=\"$password\"" "$N$T"
fi
+ json_get_vars subject_match
+ [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
+
+ json_get_values altsubject_match altsubject_match
+ if [ -n "$altsubject_match" ]; then
+ local list=
+ for x in $altsubject_match; do
+ append list "$x" ";"
+ done
+ append network_data "altsubject_match=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_match domain_match
+ if [ -n "$domain_match" ]; then
+ local list=
+ for x in $domain_match; do
+ append list "$x" ";"
+ done
+ append network_data "domain_match=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_suffix_match domain_suffix_match
+ if [ -n "$domain_suffix_match" ]; then
+ local list=
+ for x in $domain_suffix_match; do
+ append list "$x" ";"
+ done
+ append network_data "domain_suffix_match=\"$list\"" "$N$T"
+ fi
+
phase2proto="auth="
case "$auth" in
"auth"*)
auth="$(echo $auth | cut -b 5- )"
[ "$eap_type" = "ttls" ] &&
phase2proto="autheap="
+ json_get_vars subject_match2
+ [ -n "$subject_match2" ] && append network_data "subject_match2=\"$subject_match2\"" "$N$T"
+
+ json_get_values altsubject_match2 altsubject_match2
+ if [ -n "$altsubject_match2" ]; then
+ local list=
+ for x in $altsubject_match2; do
+ append list "$x" ";"
+ done
+ append network_data "altsubject_match2=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_match2 domain_match2
+ if [ -n "$domain_match2" ]; then
+ local list=
+ for x in $domain_match2; do
+ append list "$x" ";"
+ done
+ append network_data "domain_match2=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_suffix_match2 domain_suffix_match2
+ if [ -n "$domain_suffix_match2" ]; then
+ local list=
+ for x in $domain_suffix_match2; do
+ append list "$x" ";"
+ done
+ append network_data "domain_suffix_match2=\"$list\"" "$N$T"
+ fi
;;
esac
append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
}
wpa_supplicant_run() {
- local ifname="$1"; shift
+ local ifname="$1"
+ local hostapd_ctrl="$2"
_wpa_supplicant_common "$ifname"
- /usr/sbin/wpa_supplicant -B -s \
- ${network_bridge:+-b $network_bridge} \
- -P "/var/run/wpa_supplicant-${ifname}.pid" \
- -D ${_w_driver:-wext} \
- -i "$ifname" \
- -c "$_config" \
- -C "$_rpath" \
- "$@"
+ ubus wait_for wpa_supplicant
+ ubus call wpa_supplicant config_add "{ \
+ \"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \
+ \"iface\": \"$ifname\", \"config\": \"$_config\" \
+ ${network_bridge:+, \"bridge\": \"$network_bridge\"} \
+ ${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \
+ }"
ret="$?"
- wireless_add_process "$(cat "/var/run/wpa_supplicant-${ifname}.pid")" /usr/sbin/wpa_supplicant 1
[ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
+ local supplicant_pid=$(ubus call service list '{"name": "wpad"}' | jsonfilter -l 1 -e "@['wpad'].instances['supplicant'].pid")
+ wireless_add_process "$supplicant_pid" "/usr/sbin/wpa_supplicant" 1
+
return $ret
}
hostapd_common_cleanup() {
- killall hostapd wpa_supplicant meshd-nl80211
+ killall meshd-nl80211
}
projects / openwrt / openwrt.git / blobdiff