+. /lib/functions/network.sh
+
wpa_supplicant_add_rate() {
local var="$1"
local val="$(($2 / 1000))"
config_add_array supported_rates
config_add_string country
- config_add_boolean country_ie doth ht_coex
+ config_add_boolean country_ie doth
config_add_string require_mode
hostapd_add_log_config
local base="${config%%.conf}"
local base_cfg=
- json_get_vars country country_ie beacon_int doth require_mode ht_coex
+ json_get_vars country country_ie beacon_int doth require_mode
hostapd_set_log_options base_cfg
set_default country_ie 1
set_default doth 1
- set_default ht_coex 0
- append base_cfg "ht_coex=$ht_coex" "$N"
[ -n "$country" ] && {
append base_cfg "country_code=$country" "$N"
config_add_boolean rsn_preauth auth_cache
config_add_int ieee80211w
+ config_add_int eapol_version
config_add_string 'auth_server:host' 'server:host'
config_add_string auth_secret
config_add_string nasid
config_add_string ownip
config_add_string iapp_interface
- config_add_string eap_type ca_cert client_cert identity auth priv_key priv_key_pwd
+ config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
config_add_int dynamic_vlan vlan_naming
config_add_string vlan_tagged_interface vlan_bridge
+ config_add_string vlan_file
config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
wps_device_type wps_device_name wps_manufacturer wps_pin \
macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
- iapp_interface
+ iapp_interface eapol_version acct_server acct_secret acct_port \
+ dynamic_vlan
set_default isolate 0
set_default maxassoc 0
set_default hidden 0
set_default wmm 1
set_default uapsd 1
+ set_default eapol_version 0
+ set_default acct_port 1813
append bss_conf "ctrl_interface=/var/run/hostapd"
if [ "$isolate" -gt 0 ]; then
[ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N"
}
+ [ -n "$acct_server" ] && {
+ append bss_conf "acct_server_addr=$acct_server" "$N"
+ append bss_conf "acct_server_port=$acct_port" "$N"
+ [ -n "$acct_secret" ] && \
+ append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+ }
+
+ local vlan_possible=""
+
case "$auth_type" in
none)
wps_possible=1
[ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
}
+ [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
+
wps_possible=1
append wpa_key_mgmt "WPA-PSK"
;;
eap)
json_get_vars \
auth_server auth_secret auth_port \
- acct_server acct_secret acct_port \
dae_client dae_secret dae_port \
ownip \
- eap_reauth_period dynamic_vlan \
- vlan_naming vlan_tagged_interface \
- vlan_bridge
+ eap_reauth_period
+
+ # radius can provide VLAN ID for clients
+ vlan_possible=1
# legacy compatibility
[ -n "$auth_server" ] || json_get_var auth_server server
[ -n "$auth_secret" ] || json_get_var auth_secret key
set_default auth_port 1812
- set_default acct_port 1813
set_default dae_port 3799
- set_default vlan_naming 1
append bss_conf "auth_server_addr=$auth_server" "$N"
append bss_conf "auth_server_port=$auth_port" "$N"
append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
- [ -n "$acct_server" ] && {
- append bss_conf "acct_server_addr=$acct_server" "$N"
- append bss_conf "acct_server_port=$acct_port" "$N"
- [ -n "$acct_secret" ] && \
- append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
- }
-
[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
[ -n "$dae_client" -a -n "$dae_secret" ] && {
append bss_conf "ieee8021x=1" "$N"
append wpa_key_mgmt "WPA-EAP"
- [ -n "$dynamic_vlan" ] && {
- append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
- append bss_conf "vlan_naming=$vlan_naming" "$N"
- [ -n "$vlan_bridge" ] && \
- append bss_conf "vlan_bridge=$vlan_bridge" "$N"
- [ -n "$vlan_tagged_interface" ] && \
- append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
- }
+ [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
;;
wep)
local wep_keyidx=0
[ -n "$wps_possible" -a -n "$config_methods" ] && {
set_default ext_registrar 0
set_default wps_device_type "6-0050F204-1"
- set_default wps_device_name "OpenWrt AP"
- set_default wps_manufacturer "openwrt.org"
+ set_default wps_device_name "Lede AP"
+ set_default wps_manufacturer "www.lede-project.org"
wps_state=2
[ -n "$wps_configured" ] && wps_state=1
append bss_conf "ssid=$ssid" "$N"
[ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
[ -n "$iapp_interface" ] && {
- iapp_interface="$(uci_get_state network "$iapp_interface" ifname "$iapp_interface")"
- [ -n "$iapp_interface" ] && append bss_conf "iapp_interface=$iapp_interface" "$N"
+ local ifname
+ network_get_device ifname "$iapp_interface" || ifname = "$iapp_interface"
+ append bss_conf "iapp_interface=$ifname" "$N"
}
if [ "$wpa" -ge "1" ]; then
allow)
append bss_conf "macaddr_acl=1" "$N"
append bss_conf "accept_mac_file=$_macfile" "$N"
+ # accept_mac_file can be used to set MAC to VLAN ID mapping
+ vlan_possible=1
;;
deny)
append bss_conf "macaddr_acl=0" "$N"
) > "$_macfile"
}
+ [ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
+ json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file
+ set_default vlan_naming 1
+ append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
+ append bss_conf "vlan_naming=$vlan_naming" "$N"
+ [ -n "$vlan_bridge" ] && \
+ append bss_conf "vlan_bridge=$vlan_bridge" "$N"
+ [ -n "$vlan_tagged_interface" ] && \
+ append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
+ [ -n "$vlan_file" ] && {
+ [ -e "$vlan_file" ] || touch "$vlan_file"
+ append bss_conf "vlan_file=$vlan_file" "$N"
+ }
+ }
+
append "$var" "$bss_conf" "$N"
return 0
}
_w_modestr="mode=1"
}
+ local country_str=
+ [ -n "$country" ] && {
+ country_str="country=$country"
+ }
+
wpa_supplicant_teardown_interface "$ifname"
cat > "$_config" <<EOF
$ap_scan
+$country_str
EOF
return 0
}
json_get_vars \
ssid bssid key \
basic_rate mcast_rate \
- ieee80211w
+ ieee80211w ieee80211r
+
+ set_default ieee80211r 0
local key_mgmt='NONE'
local enc_str=
local network_data=
local T=" "
- local wpa_key_mgmt="WPA-PSK"
local scan_ssid="scan_ssid=1"
- local freq
+ local freq wpa_key_mgmt
[[ "$_w_mode" = "adhoc" ]] && {
append network_data "mode=1" "$N$T"
scan_ssid="scan_ssid=0"
- [ "$_w_driver" = "nl80211" ] || wpa_key_mgmt="WPA-NONE"
+ [ "$_w_driver" = "nl80211" ] || append wpa_key_mgmt "WPA-NONE"
}
[[ "$_w_mode" = "mesh" ]] && {
+ json_get_vars mesh_id
+ ssid="${mesh_id}"
+
append network_data "mode=5" "$N$T"
[ -n "$channel" ] && {
freq="$(get_freq "$phy" "$channel")"
append network_data "frequency=$freq" "$N$T"
}
- wpa_key_mgmt="SAE"
+ append wpa_key_mgmt "SAE"
scan_ssid=""
}
psk)
local passphrase
+ append wpa_key_mgmt "WPA-PSK"
+ [ "$ieee80211r" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
key_mgmt="$wpa_key_mgmt"
+
if [ ${#key} -eq 64 ]; then
passphrase="psk=${key}"
else
append network_data "$passphrase" "$N$T"
;;
eap)
- key_mgmt='WPA-EAP'
+ append wpa_key_mgmt "WPA-EAP"
+ [ "$ieee80211r" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
+ key_mgmt="$wpa_key_mgmt"
- json_get_vars eap_type identity ca_cert
+ json_get_vars eap_type identity anonymous_identity ca_cert
[ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
[ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
+ [ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
case "$eap_type" in
tls)
json_get_vars client_cert priv_key priv_key_pwd
append network_data "private_key=\"$priv_key\"" "$N$T"
append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
;;
- peap|ttls)
- json_get_vars auth password
+ fast|peap|ttls)
+ json_get_vars auth password ca_cert2 client_cert2 priv_key2 priv_key2_pwd
set_default auth MSCHAPV2
- append network_data "phase2=\"$auth\"" "$N$T"
- append network_data "password=\"$password\"" "$N$T"
+
+ if [ "$auth" = "EAP-TLS" ]; then
+ [ -n "$ca_cert2" ] &&
+ append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
+ append network_data "client_cert2=\"$client_cert2\"" "$N$T"
+ append network_data "private_key2=\"$priv_key2\"" "$N$T"
+ append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
+ else
+ append network_data "password=\"$password\"" "$N$T"
+ fi
+
+ phase2proto="auth="
+ case "$auth" in
+ "auth"*)
+ phase2proto=""
+ ;;
+ "EAP-"*)
+ auth="$(echo $auth | cut -b 5- )"
+ [ "$eap_type" = "ttls" ] &&
+ phase2proto="autheap="
+ ;;
+ esac
+ append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
;;
esac
append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
projects / openwrt / openwrt.git / blobdiff