config BUSYBOX_CONFIG_NAMEIF
bool "nameif"
- default n
+ default BUSYBOX_DEFAULT_NAMEIF
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
bool "Extended nameif"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED
depends on BUSYBOX_CONFIG_NAMEIF
help
This extends the nameif syntax to support the bus_info, driver,
new_interface_name 00:80:C8:38:91:B5
config BUSYBOX_CONFIG_NBDCLIENT
bool "nbd-client"
- default n
+ default BUSYBOX_DEFAULT_NBDCLIENT
help
Network block device client
config BUSYBOX_CONFIG_NC
bool "nc"
- default y
+ default BUSYBOX_DEFAULT_NC
help
A simple Unix utility which reads and writes data across network
connections.
config BUSYBOX_CONFIG_NC_SERVER
bool "Netcat server options (-l)"
- default n
+ default BUSYBOX_DEFAULT_NC_SERVER
depends on BUSYBOX_CONFIG_NC
help
Allow netcat to act as a server.
config BUSYBOX_CONFIG_NC_EXTRA
- bool "Netcat extensions (-eiw and filename)"
- default n
+ bool "Netcat extensions (-eiw and -f FILE)"
+ default BUSYBOX_DEFAULT_NC_EXTRA
depends on BUSYBOX_CONFIG_NC
help
Add -e (support for executing the rest of the command line after
config BUSYBOX_CONFIG_NC_110_COMPAT
bool "Netcat 1.10 compatibility (+2.5k)"
- default n # off specially for Rob
+ default BUSYBOX_DEFAULT_NC_110_COMPAT # off specially for Rob
depends on BUSYBOX_CONFIG_NC
help
This option makes nc closely follow original nc-1.10.
The code is about 2.5k bigger. It enables
-s ADDR, -n, -u, -v, -o FILE, -z options, but loses
- busybox-specific extensions: -f FILE and -ll.
+ busybox-specific extensions: -f FILE.
config BUSYBOX_CONFIG_PING
bool "ping"
- default y
+ default BUSYBOX_DEFAULT_PING
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
config BUSYBOX_CONFIG_PING6
bool "ping6"
- default y
+ default BUSYBOX_DEFAULT_PING6
depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
help
This will give you a ping that can talk IPv6.
config BUSYBOX_CONFIG_FEATURE_FANCY_PING
bool "Enable fancy ping output"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_FANCY_PING
depends on BUSYBOX_CONFIG_PING
help
Make the output from the ping applet include statistics, and at the
same time provide full support for ICMP packets.
+config BUSYBOX_CONFIG_WGET
+ bool "wget"
+ default BUSYBOX_DEFAULT_WGET
+ help
+ wget is a utility for non-interactive download of files from HTTP
+ and FTP servers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
+ bool "Enable a nifty process meter (+2k)"
+ default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Enable the transfer progress bar for wget transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
+ bool "Enable HTTP authentication"
+ default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Support authenticated HTTP transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
+ bool "Enable long options"
+ default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS
+ depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
+ help
+ Support long options for the wget applet.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
+ bool "Enable timeout option -T SEC"
+ default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Supports network read and connect timeouts for wget,
+ so that wget will give up and timeout, through the -T
+ command line option.
+
+ Currently only connect and network data read timeout are
+ supported (i.e., timeout is not applied to the DNS query). When
+ FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
+ will work in addition to -T.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL
+ bool "Try to connect to HTTPS using openssl"
+ default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Choose how wget establishes SSL connection for https:// URLs.
+
+ Busybox itself contains no SSL code. wget will spawn
+ a helper program to talk over HTTPS.
+
+ OpenSSL has a simple SSL client for debug purposes.
+ If you select "openssl" helper, wget will effectively call
+ "openssl s_client -quiet -connect IP:443 2>/dev/null"
+ and pipe its data through it.
+ Note inconvenient API: host resolution is done twice,
+ and there is no guarantee openssl's idea of IPv6 address
+ format is the same as ours.
+ Another problem is that s_client prints debug information
+ to stderr, and it needs to be suppressed. This means
+ all error messages get suppressed too.
+ openssl is also a big binary, often dynamically linked
+ against ~15 libraries.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_SSL_HELPER
+ bool "Try to connect to HTTPS using ssl_helper"
+ default BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Choose how wget establishes SSL connection for https:// URLs.
+
+ Busybox itself contains no SSL code. wget will spawn
+ a helper program to talk over HTTPS.
+
+ ssl_helper is a tool which can be built statically
+ from busybox sources against a small embedded SSL library.
+ Please see networking/ssl_helper/README.
+ It does not require double host resolution and emits
+ error messages to stderr.
+
+ Precompiled static binary may be available at
+ http://busybox.net/downloads/binaries/
config BUSYBOX_CONFIG_WHOIS
bool "whois"
- default n
+ default BUSYBOX_DEFAULT_WHOIS
help
whois is a client for the whois directory service
config BUSYBOX_CONFIG_FEATURE_IPV6
bool "Enable IPv6 support"
- default IPV6
+ default BUSYBOX_DEFAULT_FEATURE_IPV6
help
Enable IPv6 support in busybox.
This adds IPv6 support in the networking applets.
config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
bool "Enable Unix domain socket support (usually not needed)"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL
help
Enable Unix domain socket support in all busybox networking
applets. Address of the form local:/path/to/unix/socket
config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
bool "Prefer IPv4 addresses from DNS queries"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS
depends on BUSYBOX_CONFIG_FEATURE_IPV6
help
Use IPv4 address of network host if it has one.
config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
bool "Verbose resolution errors"
- default y
+ default BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS
help
Enable if you are not satisfied with simplistic
"can't resolve 'hostname.com'" and want to know more.
config BUSYBOX_CONFIG_ARP
bool "arp"
- default n
+ default BUSYBOX_DEFAULT_ARP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Manipulate the system ARP cache.
config BUSYBOX_CONFIG_ARPING
bool "arping"
- default y
+ default BUSYBOX_DEFAULT_ARPING
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ping hosts by ARP packets.
config BUSYBOX_CONFIG_BRCTL
bool "brctl"
- default y
+ default BUSYBOX_DEFAULT_BRCTL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Manage ethernet bridges.
config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
bool "Fancy options"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY
depends on BUSYBOX_CONFIG_BRCTL
help
Add support for extended option like:
config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
bool "Support show"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW
depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
help
Add support for option which prints the current config:
config BUSYBOX_CONFIG_DNSD
bool "dnsd"
- default n
+ default BUSYBOX_DEFAULT_DNSD
help
Small and static DNS server daemon.
config BUSYBOX_CONFIG_ETHER_WAKE
bool "ether-wake"
- default n
+ default BUSYBOX_DEFAULT_ETHER_WAKE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Send a magic packet to wake up sleeping machines.
config BUSYBOX_CONFIG_FAKEIDENTD
bool "fakeidentd"
- default n
+ default BUSYBOX_DEFAULT_FAKEIDENTD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
fakeidentd listens on the ident port and returns a predefined
config BUSYBOX_CONFIG_FTPD
bool "ftpd"
- default n
+ default BUSYBOX_DEFAULT_FTPD
help
simple FTP daemon. You have to run it via inetd.
config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
bool "Enable upload commands"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_FTP_WRITE
depends on BUSYBOX_CONFIG_FTPD
help
Enable all kinds of FTP upload commands (-w option)
config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
bool "Enable workaround for RFC-violating clients"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST
depends on BUSYBOX_CONFIG_FTPD
help
Some ftp clients (among them KDE's Konqueror) issue illegal
it increases the code size by ~40 bytes.
Most other ftp servers seem to behave similar to this.
+config BUSYBOX_CONFIG_FEATURE_FTP_AUTHENTICATION
+ bool "Enable authentication"
+ default BUSYBOX_DEFAULT_FEATURE_FTP_AUTHENTICATION
+ depends on BUSYBOX_CONFIG_FTPD
+ help
+ Enable basic system login as seen in telnet etc.
+
config BUSYBOX_CONFIG_FTPGET
bool "ftpget"
- default n
+ default BUSYBOX_DEFAULT_FTPGET
help
Retrieve a remote file via FTP.
config BUSYBOX_CONFIG_FTPPUT
bool "ftpput"
- default n
+ default BUSYBOX_DEFAULT_FTPPUT
help
Store a remote file via FTP.
config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
bool "Enable long options in ftpget/ftpput"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_FTPGETPUT_LONG_OPTIONS
depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
help
Support long options for the ftpget/ftpput applet.
config BUSYBOX_CONFIG_HOSTNAME
bool "hostname"
- default n
+ default BUSYBOX_DEFAULT_HOSTNAME
help
Show or set the system's host name.
config BUSYBOX_CONFIG_HTTPD
bool "httpd"
- default n
+ default BUSYBOX_DEFAULT_HTTPD
help
Serve web pages via an HTTP server.
config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
bool "Support 'Ranges:' header"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES
depends on BUSYBOX_CONFIG_HTTPD
help
Makes httpd emit "Accept-Ranges: bytes" header and understand
"Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
downloads, seeking in multimedia players etc.
-config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
- bool "Use sendfile system call"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- When enabled, httpd will use the kernel sendfile() function
- instead of read/write loop.
-
config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
bool "Enable -u <user> option"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID
depends on BUSYBOX_CONFIG_HTTPD
help
This option allows the server to run as a specific user
config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
bool "Enable Basic http Authentication"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH
depends on BUSYBOX_CONFIG_HTTPD
help
Utilizes password settings from /etc/httpd.conf for basic
authentication on a per url basis.
+ Example for httpd.conf file:
+ /adm:toor:PaSsWd
config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
bool "Support MD5 crypted passwords for http Authentication"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
help
- Enables basic per URL authentication from /etc/httpd.conf
- using md5 passwords.
+ Enables encrypted passwords, and wildcard user/passwords
+ in httpd.conf file.
+ User '*' means 'any system user name is ok',
+ password of '*' means 'use system password for this user'
+ Examples:
+ /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
+ /adm:root:*
+ /wiki:*:*
config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
bool "Support Common Gateway Interface (CGI)"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI
depends on BUSYBOX_CONFIG_HTTPD
help
This option allows scripts and executables to be invoked
config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
bool "Support for running scripts through an interpreter"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
help
This option enables support for running scripts through an
interpreter. Turn this on if you want PHP scripts to work
- properly. You need to supply an additional line in your httpd
- config file:
+ properly. You need to supply an additional line in your
+ httpd.conf file:
*.php:/path/to/your/php
config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
bool "Set REMOTE_PORT environment variable for CGI"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
help
Use of this option can assist scripts in generating
config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
bool "Enable -e option (useful for CGIs written as shell scripts)"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR
depends on BUSYBOX_CONFIG_HTTPD
help
This option allows html encoding of arbitrary strings for display
config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
bool "Support for custom error pages"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES
depends on BUSYBOX_CONFIG_HTTPD
help
This option allows you to define custom error pages in
config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
bool "Support for reverse proxy"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY
depends on BUSYBOX_CONFIG_HTTPD
help
This option allows you to define URLs that will be forwarded
config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
bool "Support for GZIP content encoding"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP
depends on BUSYBOX_CONFIG_HTTPD
help
Makes httpd send files using GZIP content encoding if the
config BUSYBOX_CONFIG_IFCONFIG
bool "ifconfig"
- default y
+ default BUSYBOX_DEFAULT_IFCONFIG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ifconfig is used to configure the kernel-resident network interfaces.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
bool "Enable status reporting output (+7k)"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS
depends on BUSYBOX_CONFIG_IFCONFIG
help
If ifconfig is called with no arguments it will display the status
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
bool "Enable slip-specific options \"keepalive\" and \"outfill\""
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP
depends on BUSYBOX_CONFIG_IFCONFIG
help
Allow "keepalive" and "outfill" support for SLIP. If you're not
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
depends on BUSYBOX_CONFIG_IFCONFIG
help
Allow the start address for shared memory, start address for I/O,
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
bool "Enable option \"hw\" (ether only)"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW
depends on BUSYBOX_CONFIG_IFCONFIG
help
Set the hardware address of this interface, if the device driver
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
bool "Set the broadcast automatically"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS
depends on BUSYBOX_CONFIG_IFCONFIG
help
Setting this will make ifconfig attempt to find the broadcast
config BUSYBOX_CONFIG_IFENSLAVE
bool "ifenslave"
- default n
+ default BUSYBOX_DEFAULT_IFENSLAVE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Userspace application to bind several interfaces
config BUSYBOX_CONFIG_IFPLUGD
bool "ifplugd"
- default n
+ default BUSYBOX_DEFAULT_IFPLUGD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Network interface plug detection daemon.
config BUSYBOX_CONFIG_IFUPDOWN
bool "ifupdown"
- default n
+ default BUSYBOX_DEFAULT_IFUPDOWN
help
Activate or deactivate the specified interfaces. This applet makes
use of either "ifconfig" and "route" or the "ip" command to actually
config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
string "Absolute path to ifstate file"
- default n
+ default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH
depends on BUSYBOX_CONFIG_IFUPDOWN
help
ifupdown keeps state information in a file called ifstate.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
bool "Use ip applet"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP
depends on BUSYBOX_CONFIG_IFUPDOWN
help
Use the iproute "ip" command to implement "ifup" and "ifdown", rather
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
bool "Use busybox ip applet"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP_BUILTIN
depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_IP
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
bool "Use busybox ifconfig and route applets"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
select BUSYBOX_CONFIG_IFCONFIG
select BUSYBOX_CONFIG_ROUTE
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
bool "Support for IPv4"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4
depends on BUSYBOX_CONFIG_IFUPDOWN
help
If you want ifup/ifdown to talk IPv4, leave this on.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
bool "Support for IPv6"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6
depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
help
If you need support for IPv6, turn this option on.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
bool "Enable mapping support"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING
depends on BUSYBOX_CONFIG_IFUPDOWN
help
This enables support for the "mapping" stanza, unless you have
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
bool "Support for external dhcp clients"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP
depends on BUSYBOX_CONFIG_IFUPDOWN
help
This enables support for the external dhcp clients. Clients are
config BUSYBOX_CONFIG_INETD
bool "inetd"
- default n
+ default BUSYBOX_DEFAULT_INETD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Internet superserver daemon
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
bool "Support echo service"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
depends on BUSYBOX_CONFIG_INETD
help
Echo received data internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
bool "Support discard service"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
depends on BUSYBOX_CONFIG_INETD
help
Internet /dev/null internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
bool "Support time service"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME
depends on BUSYBOX_CONFIG_INETD
help
Return 32 bit time since 1900 internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
bool "Support daytime service"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
depends on BUSYBOX_CONFIG_INETD
help
Return human-readable time internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
bool "Support chargen service"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
depends on BUSYBOX_CONFIG_INETD
help
Familiar character generator internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_RPC
bool "Support RPC services"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_INETD_RPC # very rarely used, and needs Sun RPC support in libc
depends on BUSYBOX_CONFIG_INETD
select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
help
config BUSYBOX_CONFIG_IP
bool "ip"
- default n
+ default BUSYBOX_DEFAULT_IP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The "ip" applet is a TCP/IP interface configuration and routing
config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
bool "ip address"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS
depends on BUSYBOX_CONFIG_IP
help
Address manipulation support for the "ip" applet.
config BUSYBOX_CONFIG_FEATURE_IP_LINK
bool "ip link"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IP_LINK
depends on BUSYBOX_CONFIG_IP
help
Configure network devices with "ip".
config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
bool "ip route"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE
depends on BUSYBOX_CONFIG_IP
help
Add support for routing table management to "ip".
+config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR
+ string "ip route configuration directory"
+ default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR
+ depends on BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+ help
+ Location of the "ip" applet routing configuration.
+
config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
bool "ip tunnel"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL
depends on BUSYBOX_CONFIG_IP
help
Add support for tunneling commands to "ip".
config BUSYBOX_CONFIG_FEATURE_IP_RULE
bool "ip rule"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IP_RULE
depends on BUSYBOX_CONFIG_IP
help
Add support for rule commands to "ip".
+config BUSYBOX_CONFIG_FEATURE_IP_NEIGH
+ bool "ip neighbor"
+ default BUSYBOX_DEFAULT_FEATURE_IP_NEIGH
+ depends on BUSYBOX_CONFIG_IP
+ help
+ Add support for neighbor commands to "ip".
+
config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
bool "Support short forms of ip commands"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IP_SHORT_FORMS
depends on BUSYBOX_CONFIG_IP
help
Also support short-form of ip <OBJECT> commands:
ip route -> iproute
ip tunnel -> iptunnel
ip rule -> iprule
+ ip neigh -> ipneigh
Say N unless you desparately need the short form of the ip
object commands.
config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
bool "Support displaying rarely used link types"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS
depends on BUSYBOX_CONFIG_IP
help
If you are not going to use links of type "frad", "econet",
config BUSYBOX_CONFIG_IPADDR
bool
- default n
+ default BUSYBOX_DEFAULT_IPADDR
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
config BUSYBOX_CONFIG_IPLINK
bool
- default n
+ default BUSYBOX_DEFAULT_IPLINK
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
config BUSYBOX_CONFIG_IPROUTE
bool
- default n
+ default BUSYBOX_DEFAULT_IPROUTE
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
config BUSYBOX_CONFIG_IPTUNNEL
bool
- default n
+ default BUSYBOX_DEFAULT_IPTUNNEL
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
config BUSYBOX_CONFIG_IPRULE
bool
- default n
+ default BUSYBOX_DEFAULT_IPRULE
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
+config BUSYBOX_CONFIG_IPNEIGH
+ bool
+ default BUSYBOX_DEFAULT_IPNEIGH
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_NEIGH
+
config BUSYBOX_CONFIG_IPCALC
bool "ipcalc"
- default n
+ default BUSYBOX_DEFAULT_IPCALC
help
ipcalc takes an IP address and netmask and calculates the
resulting broadcast, network, and host range.
config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
bool "Fancy IPCALC, more options, adds 1 kbyte"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY
depends on BUSYBOX_CONFIG_IPCALC
help
Adds the options hostname, prefix and silent to the output of
config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
bool "Enable long options"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_IPCALC_LONG_OPTIONS
depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS
help
Support long options for the ipcalc applet.
config BUSYBOX_CONFIG_NETMSG
bool "netmsg"
- default y
+ default BUSYBOX_DEFAULT_NETMSG
help
simple program for sending udp broadcast messages
config BUSYBOX_CONFIG_NETSTAT
bool "netstat"
- default y
+ default BUSYBOX_DEFAULT_NETSTAT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
netstat prints information about the Linux networking subsystem.
config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
bool "Enable wide netstat output"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE
depends on BUSYBOX_CONFIG_NETSTAT
help
Add support for wide columns. Useful when displaying IPv6 addresses
config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
bool "Enable PID/Program name output"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG
depends on BUSYBOX_CONFIG_NETSTAT
help
Add support for -p flag to print out PID and program name.
config BUSYBOX_CONFIG_NSLOOKUP
bool "nslookup"
- default y
+ default BUSYBOX_DEFAULT_NSLOOKUP
help
nslookup is a tool to query Internet name servers.
+config BUSYBOX_CONFIG_NSLOOKUP_LEDE
+ bool "nslookup_lede"
+ depends on !BUSYBOX_CONFIG_NSLOOKUP
+ default BUSYBOX_DEFAULT_NSLOOKUP_LEDE
+ help
+ nslookup is a tool to query Internet name servers (LEDE flavor).
+
+config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS
+ bool "Enable long options"
+ default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LEDE_LONG_OPTIONS
+ depends on BUSYBOX_CONFIG_NSLOOKUP_LEDE && BUSYBOX_CONFIG_LONG_OPTS
+ help
+ Support long options for the nslookup applet.
+
config BUSYBOX_CONFIG_NTPD
bool "ntpd"
- default y
+ default BUSYBOX_DEFAULT_NTPD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The NTP client/server daemon.
config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
bool "Make ntpd usable as a NTP server"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER
depends on BUSYBOX_CONFIG_NTPD
help
Make ntpd usable as a NTP server. If you disable this option
ntpd will be usable only as a NTP client.
+config BUSYBOX_CONFIG_FEATURE_NTPD_CONF
+ bool "Make ntpd understand /etc/ntp.conf"
+ default BUSYBOX_DEFAULT_FEATURE_NTPD_CONF
+ depends on BUSYBOX_CONFIG_NTPD
+ help
+ Make ntpd look in /etc/ntp.conf for peers. Only "server address"
+ is supported.
+
config BUSYBOX_CONFIG_PSCAN
bool "pscan"
- default n
+ default BUSYBOX_DEFAULT_PSCAN
help
Simple network port scanner.
config BUSYBOX_CONFIG_ROUTE
bool "route"
- default y
+ default BUSYBOX_DEFAULT_ROUTE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Route displays or manipulates the kernel's IP routing tables.
config BUSYBOX_CONFIG_SLATTACH
bool "slattach"
- default n
+ default BUSYBOX_DEFAULT_SLATTACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
slattach is a small utility to attach network interfaces to serial
config BUSYBOX_CONFIG_TCPSVD
bool "tcpsvd"
- default n
+ default BUSYBOX_DEFAULT_TCPSVD
help
tcpsvd listens on a TCP port and runs a program for each new
connection.
config BUSYBOX_CONFIG_TELNET
bool "telnet"
- default y
+ default BUSYBOX_DEFAULT_TELNET
help
Telnet is an interface to the TELNET protocol, but is also commonly
used to test other simple protocols.
config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
bool "Pass TERM type to remote host"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE
depends on BUSYBOX_CONFIG_TELNET
help
Setting this option will forward the TERM environment variable to the
config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
bool "Pass USER type to remote host"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN
depends on BUSYBOX_CONFIG_TELNET
help
Setting this option will forward the USER environment variable to the
config BUSYBOX_CONFIG_TELNETD
bool "telnetd"
- default y
+ default BUSYBOX_DEFAULT_TELNETD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
A daemon for the TELNET protocol, allowing you to log onto the host
Note that for busybox telnetd to work you need several things:
First of all, your kernel needs:
- UNIX98_PTYS=y
- DEVPTS_FS=y
+ CONFIG_UNIX98_PTYS=y
Next, you need a /dev/pts directory on your root filesystem:
config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
bool "Support standalone telnetd (not inetd only)"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE
depends on BUSYBOX_CONFIG_TELNETD
help
Selecting this will make telnetd able to run standalone.
config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
bool "Support -w SEC option (inetd wait mode)"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT
depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
help
This option allows you to run telnetd in "inet wait" mode.
config BUSYBOX_CONFIG_TFTP
bool "tftp"
- default n
+ default BUSYBOX_DEFAULT_TFTP
help
This enables the Trivial File Transfer Protocol client program. TFTP
is usually used for simple, small transfers such as a root image
config BUSYBOX_CONFIG_TFTPD
bool "tftpd"
- default n
+ default BUSYBOX_DEFAULT_TFTPD
help
This enables the Trivial File Transfer Protocol server program.
It expects that stdin is a datagram socket and a packet
config BUSYBOX_CONFIG_FEATURE_TFTP_GET
bool "Enable 'tftp get' and/or tftpd upload code"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TFTP_GET
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
Add support for the GET command within the TFTP client. This allows
config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
bool "Enable 'tftp put' and/or tftpd download code"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TFTP_PUT
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
Add support for the PUT command within the TFTP client. This allows
config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
bool "Enable 'blksize' and 'tsize' protocol options"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
Allow tftp to specify block size, and tftpd to understand
config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
bool "Enable tftp progress meter"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR
depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
help
Show progress bar.
config BUSYBOX_CONFIG_TFTP_DEBUG
bool "Enable debug"
- default n
+ default BUSYBOX_DEFAULT_TFTP_DEBUG
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
Make tftp[d] print debugging messages on stderr.
config BUSYBOX_CONFIG_TRACEROUTE
bool "traceroute"
- default y
+ default BUSYBOX_DEFAULT_TRACEROUTE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to trace the route of IP packets.
config BUSYBOX_CONFIG_TRACEROUTE6
bool "traceroute6"
- default n
+ default BUSYBOX_DEFAULT_TRACEROUTE6
depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE
help
Utility to trace the route of IPv6 packets.
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
bool "Enable verbose output"
- default y
+ default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE
depends on BUSYBOX_CONFIG_TRACEROUTE
help
Add some verbosity to traceroute. This includes among other things
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
bool "Enable loose source route"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_SOURCE_ROUTE
depends on BUSYBOX_CONFIG_TRACEROUTE
help
Add option to specify a loose source route gateway
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
bool "Use ICMP instead of UDP"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP
depends on BUSYBOX_CONFIG_TRACEROUTE
help
Add option -I to use ICMP ECHO instead of UDP datagrams.
config BUSYBOX_CONFIG_TUNCTL
bool "tunctl"
- default n
+ default BUSYBOX_DEFAULT_TUNCTL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
tunctl creates or deletes tun devices.
config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
bool "Support owner:group assignment"
- default n
+ default BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG
depends on BUSYBOX_CONFIG_TUNCTL
help
Allow to specify owner and group of newly created interface.
340 bytes of pure bloat. Say no here.
-source package/utils/busybox/config/networking/udhcp/Config.in
+source udhcp/Config.in
config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
string "ifup udhcpc command line options"
- default "-R -n"
+ default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS
depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC
help
Command line options to pass to udhcpc from ifup.
config BUSYBOX_CONFIG_UDPSVD
bool "udpsvd"
- default n
+ default BUSYBOX_DEFAULT_UDPSVD
help
udpsvd listens on an UDP port and runs a program for each new
connection.
config BUSYBOX_CONFIG_VCONFIG
bool "vconfig"
- default y
+ default BUSYBOX_DEFAULT_VCONFIG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Creates, removes, and configures VLAN interfaces
-config BUSYBOX_CONFIG_WGET
- bool "wget"
- default y
- help
- wget is a utility for non-interactive download of files from HTTP,
- HTTPS, and FTP servers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
- bool "Enable a nifty process meter (+2k)"
- default y
- depends on BUSYBOX_CONFIG_WGET
- help
- Enable the transfer progress bar for wget transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
- bool "Enable HTTP authentication"
- default y
- depends on BUSYBOX_CONFIG_WGET
- help
- Support authenticated HTTP transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
- bool "Enable long options"
- default y
- depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
- help
- Support long options for the wget applet.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
- bool "Enable read timeout option -T SEC"
- default n
- depends on BUSYBOX_CONFIG_WGET
- help
- Supports network read timeout for wget, so that wget will give
- up and timeout when reading network data, through the -T command
- line option. Currently only network data read timeout is
- supported (i.e., timeout is not applied to the DNS nor TCP
- connection initialization). When FEATURE_WGET_LONG_OPTIONS is
- also enabled, the --timeout option will work in addition to -T.
-
config BUSYBOX_CONFIG_ZCIP
bool "zcip"
- default n
+ default BUSYBOX_DEFAULT_ZCIP
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help