#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-include $(INCLUDE_DIR)/host.mk
-DEVICE_VARS += DEVICE_PROFILE IMAGE_SIZE DTB_SIZE
+DEVICE_VARS += IMAGE_SIZE DTB_SIZE
define Device/Default
PROFILES := Default
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
- DEVICE_PROFILE :=
DEVICE_DTS :=
KERNEL_ENTRY := 0x00000000
KERNEL_LOADADDR := 0x00000000
DEVICE_DTS_DIR := ../dts
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
endef
define Build/dtb
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
endef
+define Build/prepend-dtb
+ cat "$@.dtb.uimage" "$@" > "$@.new"
+ mv "$@.new" "$@"
+endef
+
+define Build/export-dtb
+ cp $(IMAGE_KERNEL).dtb $@
+endef
+
ifeq ($(SUBTARGET),nand)
define Image/cpiogz
define Build/MerakiNAND
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
- -B $(DEVICE_PROFILE) -s \
+ -B $(BOARD_NAME) -s \
-i $@ \
-o $@.new
@cp $@.new $@
endef
-define Device/mr24
+define Device/meraki_mr24
DEVICE_TITLE := Cisco Meraki MR24
- DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k wpad-mini
- DEVICE_PROFILE := MR24
- DEVICE_DTS := MR24
- BLOCKSIZE := 64512
+ DEVICE_PACKAGES := kmod-spi-gpio
+ BOARD_NAME := mr24
+ DEVICE_DTS := meraki-mr24
+ BLOCKSIZE := 63k
IMAGES := sysupgrade.tar
DTB_SIZE := 64512
- KERNEL_SIZE := 2048k
IMAGE_SIZE := 8191k
KERNEL := kernel-bin | lzma | uImage lzma | MerakiAdd-dtb | MerakiNAND
- KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux | gzip | uImage gzip | MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | MerakiNAND
- IMAGE/sysupgrade.tar := sysupgrade-tar
-endef
-TARGET_DEVICES += mr24
+ KERNEL_INITRAMFS := kernel-bin | lzma | dtb | MuImage-initramfs lzma
+ IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ UBINIZE_OPTS := -E 5
+ SUPPORTED_DEVICES += mr24
+endef
+TARGET_DEVICES += meraki_mr24
+
+define Device/meraki_mx60
+ DEVICE_TITLE := Cisco Meraki MX60/MX60W
+ DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-ledtrig-usbport kmod-usb-dwc2 \
+ kmod-usb-storage block-mount
+ BOARD_NAME := mx60
+ DEVICE_DTS := meraki-mx60
+ BLOCKSIZE := 63k
+ IMAGES := sysupgrade.tar
+ DTB_SIZE := 64512
+ # The kernel size will need to match the offset defined in mkmerakifw.c,
+ # otherwise the final image will fail to boot. This is set within the
+ # MX60 kernel header definition which is found at
+ # ./tools/firmware-utils/src/mkmerakifw.c, line 103~
+ KERNEL_SIZE := 2984k
+ IMAGE_SIZE := 1021m
+ KERNEL := kernel-bin | gzip | uImage gzip | MerakiAdd-dtb | MerakiNAND
+ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux | gzip | uImage gzip | \
+ check-size $$(KERNEL_SIZE) | \
+ MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | \
+ MerakiNAND
+ IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ UBINIZE_OPTS := -E 5
+ SUPPORTED_DEVICES += mx60
+endef
+TARGET_DEVICES += meraki_mx60
define Build/create-uImage-dtb
# flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
-O linux -T kernel -C none \
- -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' \
- -d $@.dtb $@.new
- @mv $@.new $@
-endef
-
-define Build/append-fakerootfs
- rm -rf $@.fakerootsquashfs $@.fakefs
-
- # append a fake/empty rootfs to fool netgear's uboot
- # CHECK_DNI_FIRMWARE_ROOTFS_INTEGRITY in do_chk_dniimg()
- dd if=/dev/zero of=$@.fakerd bs=16 count=1 conv=sync
-
- -$(STAGING_DIR_HOST)/bin/mkimage \
- -A $(LINUX_KARCH) -O linux -T filesystem -C none \
- -a 0x00000000 -e 0x00000000 \
- -n '$(DEVICE_PROFILE) fakerootfs' \
- -d $@.fakerd $@.fakefs
-
- cat $@.fakefs >> $@
- rm -rf $@.fakerootsquashfs $@.fakefs
+ -n '$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
+ -d "$@.dtb" "$@.dtb.uimage"
endef
-define Build/wndr4700-specialImage
+define Build/MuImage-initramfs
rm -rf $@.fakerd $@.new
dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi \
-C $(1) -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) \
- -n '$(DEVICE_PROFILE) initramfs' -d $@:$@.fakerd:$@.dtb $@.new
+ -n '$(BOARD_NAME) initramfs' -d $@:$@.fakerd:$@.dtb $@.new
mv $@.new $@
rm -rf $@.fakerd
endef
-define Device/WNDR4700
+define Device/netgear_wndr4700
DEVICE_TITLE := Netgear Centria N900 WNDR4700/WNDR4720
DEVICE_PACKAGES := badblocks block-mount e2fsprogs \
- kmod-ath9k kmod-dm kmod-fs-ext4 kmod-fs-vfat kmod-ledtrig-usbdev \
+ kmod-dm kmod-fs-ext4 kmod-fs-vfat kmod-usb-ledtrig-usbport \
kmod-md-mod kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-iso8859-15 \
kmod-nls-utf8 kmod-usb3 kmod-usb-dwc2 kmod-usb-storage \
- partx-utils swconfig wpad-mini
- DEVICE_NAME := wndr4700
- DEVICE_PROFILE := wndr4700
- DEVICE_DTS := wndr4700
+ partx-utils
+ BOARD_NAME := wndr4700
+ DEVICE_DTS := netgear-wndr4700
PAGESIZE := 2048
SUBPAGESIZE := 512
- BLOCKSIZE := 131072
+ BLOCKSIZE := 128k
DTB_SIZE := 131008
- IMAGE_SIZE:=25559040
- IMAGES := factory.img sysupgrade.tar
- KERNEL_SIZE := 1920k
- KERNEL := kernel-bin | lzma | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | append-fakerootfs
- KERNEL_INITRAMFS := kernel-bin | gzip | dtb | wndr4700-specialImage gzip
- IMAGE/factory.img := dtb | create-uImage-dtb | append-kernel | pad-to 2M | append-ubi | \
+ IMAGE_SIZE := 24960k
+ IMAGES := factory.img sysupgrade.tar kernel.dtb
+ KERNEL_SIZE := 3584k
+ # append a fake/empty rootfs to fool netgear's uboot
+ # CHECK_DNI_FIRMWARE_ROOTFS_INTEGRITY in do_chk_dniimg()
+ KERNEL := kernel-bin | lzma | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | \
+ append-uImage-fakehdr filesystem | dtb | create-uImage-dtb | prepend-dtb
+ KERNEL_INITRAMFS := kernel-bin | gzip | dtb | MuImage-initramfs gzip
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
netgear-dni | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.tar := sysupgrade-tar
+ IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ IMAGE/kernel.dtb := export-dtb | uImage none
NETGEAR_BOARD_ID := WNDR4700
NETGEAR_HW_ID := 29763875+128+256
+ UBINIZE_OPTS := -E 5
+ SUPPORTED_DEVICES += wndr4700
endef
-TARGET_DEVICES += WNDR4700
+TARGET_DEVICES += netgear_wndr4700
endif
mkdir -p $@.bootdir/boot
$(CP) $@.scr $@.bootdir/boot/boot.scr
- $(CP) $@.dtb $@.bootdir/boot/$(DEVICE_DTB)
- $(CP) $(word 1,$^) $@.bootdir/boot/uImage
+ $(CP) $(IMAGE_KERNEL).dtb $@.bootdir/boot/$(DEVICE_DTB)
+ $(CP) $(IMAGE_KERNEL) $@.bootdir/boot/uImage
- genext2fs --block-size $(BLOCKSIZE) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
+ genext2fs --block-size $(BLOCKSIZE:%k=%Ki) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
# convert it to revision 1 - needed for u-boot ext2load
$(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
endef
define Build/hdd-img
- ./mbl_gen_hdd_img.sh $@ $@.boot $(word 2,$^)
- $(if $(CONFIG_TARGET_IMAGES_GZIP),gzip -9n -c $@ > $(BIN_DIR)/$(notdir $@).gz)
-endef
-
-define Build/uRamdisk
- $(STAGING_DIR_HOST)/bin/mkimage \
- -A powerpc -T ramdisk -C gzip \
- -n "$(DEVICE_NAME) rootfs" \
- -d $@ $@.new
- mv $@.new $@
-endef
-
-define Build/recovery-tar
- sh ./mbl_gen_recovery_tar.sh \
- --profile $(DEVICE_PROFILE) \
- --dtb $(word 1,$^).dtb \
- --dtbname $(DEVICE_DTB) \
- --kernel $(word 1,$^) \
- --rootfs $@ \
- $@
+ ./mbl_gen_hdd_img.sh $@ $@.boot $(IMAGE_ROOTFS)
endef
define Device/MyBookLiveDefault
IMAGE_SIZE := 48m
- BLOCKSIZE := 1024
+ BLOCKSIZE := 1k
DTB_SIZE := 16384
KERNEL := kernel-bin | dtb | gzip | uImage gzip
+ KERNEL_INITRAMFS := kernel-bin | dtb | gzip | uImage gzip
BOOT_SIZE := 8
- IMAGES := rootfs.img recovery.tar kernel.dtb
+ IMAGES := rootfs.img.gz kernel.dtb
DEVICE_DTB := apollo3g.dtb
FILESYSTEMS := ext4
- IMAGE/kernel.dtb := append-dtb
- IMAGE/rootfs.img := boot-script | dtb | boot-img | hdd-img
- IMAGE/recovery.tar := append-rootfs | gzip | uRamdisk | recovery-tar
+ IMAGE/kernel.dtb := export-dtb
+ IMAGE/rootfs.img.gz := boot-script | boot-img | hdd-img | gzip | append-metadata
endef
-define Device/MyBookLiveSingle
+define Device/wd_mybooklive
$(Device/MyBookLiveDefault)
DEVICE_TITLE := Western Digital My Book Live
- DEVICE_DTS := apollo3g
- DEVICE_PROFILE := apollo3g
+ DEVICE_DTS := wd-mybooklive
+ SUPPORTED_DEVICES += mbl
endef
-TARGET_DEVICES += MyBookLiveSingle
+TARGET_DEVICES += wd_mybooklive
-define Device/MyBookLiveDuo
+define Device/wd_mybooklive-duo
$(Device/MyBookLiveDefault)
DEVICE_TITLE := Western Digital My Book Live Duo
- DEVICE_PACKAGES := kmod-usb-dwc2 kmod-ledtrig-usbdev kmod-usb-storage kmod-fs-vfat wpad-mini
- DEVICE_DTS := apollo3g-duo
- DEVICE_PROFILE := ap2nc
+ DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-mini
+ DEVICE_DTS := wd-mybooklive-duo
+ SUPPORTED_DEVICES += mbl
endef
-TARGET_DEVICES += MyBookLiveDuo
+TARGET_DEVICES += wd_mybooklive-duo
endif
projects / openwrt / openwrt.git / blobdiff