#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
-#include <linux/input.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/pci.h>
-#include <asm/mach-ar71xx/platform.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
#define RB4XX_GPIO_USER_LED 4
#define RB4XX_GPIO_RESET_SWITCH 7
.desc = "reset_switch",
.type = EV_KEY,
.code = BTN_0,
- .threshold = 5,
+ .threshold = 3,
.gpio = RB4XX_GPIO_RESET_SWITCH,
.active_low = 1,
}
static struct ar71xx_pci_irq rb4xx_pci_irqs[] __initdata = {
{
+ .slot = 0,
+ .pin = 1,
+ .irq = AR71XX_PCI_IRQ_DEV2,
+ }, {
.slot = 1,
.pin = 1,
.irq = AR71XX_PCI_IRQ_DEV0,
static inline void rb433_add_device_spi(void) {}
#endif
-static void __init rb411_setup(void)
+static void __init rb4xx_generic_setup(void)
{
- rb4xx_add_device_spi();
-
- ar71xx_add_device_mdio(0xfffffffe);
- ar71xx_add_device_eth(0, PHY_INTERFACE_MODE_MII, 0x00000001);
+ ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
rb4xx_leds_gpio);
rb4xx_gpio_buttons);
platform_device_register(&rb4xx_nand_device);
+}
+
+static void __init rb411_setup(void)
+{
+ rb4xx_generic_setup();
+ rb4xx_add_device_spi();
+
+ ar71xx_add_device_mdio(0xfffffffe);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = 0x00000001;
+
+ ar71xx_add_device_eth(0);
ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
}
-MIPS_MACHINE(MACH_AR71XX_RB_411, "MikroTik RouterBOARD 411/A/AH", rb411_setup);
+MIPS_MACHINE(AR71XX_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
+ rb411_setup);
+
+static void __init rb411u_setup(void)
+{
+ rb4xx_generic_setup();
+ rb4xx_add_device_spi();
+
+ ar71xx_add_device_mdio(0xfffffffd);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = 0x00000002;
+ ar71xx_add_device_eth(0);
+
+ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ar71xx_add_device_usb();
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
+ rb411u_setup);
static void __init rb433_setup(void)
{
+ rb4xx_generic_setup();
rb433_add_device_spi();
- ar71xx_add_device_mdio(0xffffffec);
- ar71xx_add_device_eth(1, PHY_INTERFACE_MODE_RMII, 0x00000010);
- ar71xx_add_device_eth(0, PHY_INTERFACE_MODE_MII, 0x00000003);
+ ar71xx_add_device_mdio(0xffffffe9);
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = 0x00000006;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
- ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(rb4xx_gpio_buttons),
- rb4xx_gpio_buttons);
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = 0x00000010;
- platform_device_register(&rb4xx_nand_device);
+ ar71xx_add_device_eth(1);
+ ar71xx_add_device_eth(0);
ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
}
-MIPS_MACHINE(MACH_AR71XX_RB_433, "MikroTik RouterBOARD 433/AH", rb433_setup);
+MIPS_MACHINE(AR71XX_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
+ rb433_setup);
-static void __init rb450_setup(void)
+static void __init rb433u_setup(void)
+{
+ rb433_setup();
+ ar71xx_add_device_usb();
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
+ rb433u_setup);
+
+static void __init rb450_generic_setup(int gige)
{
+ rb4xx_generic_setup();
rb4xx_add_device_spi();
ar71xx_add_device_mdio(0xffffffe0);
- ar71xx_add_device_eth(1, PHY_INTERFACE_MODE_RMII, 0x00000010);
- ar71xx_add_device_eth(0, PHY_INTERFACE_MODE_MII, 0x0000000f);
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = 0x0000000f;
+ ar71xx_eth0_data.speed = (gige) ? SPEED_1000 : SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
- ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(rb4xx_gpio_buttons),
- rb4xx_gpio_buttons);
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = 0x00000010;
- platform_device_register(&rb4xx_nand_device);
+ ar71xx_add_device_eth(1);
+ ar71xx_add_device_eth(0);
+}
+
+static void __init rb450_setup(void)
+{
+ rb450_generic_setup(0);
}
-MIPS_MACHINE(MACH_AR71XX_RB_450, "MikroTik RouterBOARD 450", rb450_setup);
+MIPS_MACHINE(AR71XX_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
+ rb450_setup);
+
+static void __init rb450g_setup(void)
+{
+ rb450_generic_setup(1);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
+ rb450g_setup);
static void __init rb493_setup(void)
{
+ rb4xx_generic_setup();
rb4xx_add_device_spi();
-#if 0
ar71xx_add_device_mdio(0x3fffff00);
- ar71xx_add_device_eth(0, PHY_INTERFACE_MODE_MII, 0x00000000);
- ar71xx_add_device_eth(1, PHY_INTERFACE_MODE_RMII, 0x00000001);
-#endif
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = 0;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
- ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(rb4xx_gpio_buttons),
- rb4xx_gpio_buttons);
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = 0x00000001;
- platform_device_register(&rb4xx_nand_device);
-}
+ ar71xx_add_device_eth(0);
+ ar71xx_add_device_eth(1);
-MIPS_MACHINE(MACH_AR71XX_RB_493, "MikroTik RouterBOARD 493/AH", rb493_setup);
+ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+}
+MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
+ rb493_setup);
projects / openwrt / openwrt.git / blobdiff