linux: ar71xx: add support for Mikrotik Routerboard RB493G
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-rb4xx.c
index 02fcaa4..88e29c0 100644 (file)
@@ -11,6 +11,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/mdio-gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/mmc/host.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -342,3 +343,64 @@ static void __init rb493_setup(void)
 
 MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
             rb493_setup);
 
 MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
             rb493_setup);
+
+#define RB493G_GPIO_MDIO_MDC           7
+#define RB493G_GPIO_MDIO_DATA          8
+
+#define RB493G_MDIO_PHYMASK            BIT(0)
+
+static struct mdio_gpio_platform_data rb493g_mdio_data = {
+       .mdc            = RB493G_GPIO_MDIO_MDC,
+       .mdio           = RB493G_GPIO_MDIO_DATA,
+
+       .phy_mask       = ~RB493G_MDIO_PHYMASK,
+};
+
+static struct platform_device rb493g_mdio_device = {
+       .name           = "mdio-gpio",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &rb493g_mdio_data,
+       },
+};
+
+static void __init rb493g_setup(void)
+{
+       ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+                                   AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+                                   rb4xx_leds_gpio);
+
+       spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+       platform_device_register(&rb4xx_spi_device);
+       platform_device_register(&rb4xx_nand_device);
+
+       ar71xx_add_device_mdio(~RB493G_MDIO_PHYMASK);
+
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
+       ar71xx_eth0_data.speed = SPEED_1000;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
+       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
+       ar71xx_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
+       ar71xx_eth1_data.speed = SPEED_1000;
+       ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+
+       platform_device_register(&rb493g_mdio_device);
+
+       ar71xx_add_device_eth(1);
+       ar71xx_add_device_eth(0);
+
+       ar71xx_add_device_usb();
+
+       ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
+            rb493g_setup);