/*
* MikroTik RouterBOARD 4xx series support
*
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/mdio-gpio.h>
#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/pci.h>
+#include <asm/mach-ar71xx/rb4xx_cpld.h>
#include "machtype.h"
#include "devices.h"
#define RB4XX_GPIO_USER_LED 4
#define RB4XX_GPIO_RESET_SWITCH 7
-#define RB4XX_BUTTONS_POLL_INTERVAL 20
+#define RB4XX_GPIO_CPLD_BASE 32
+#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
+#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
+#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
+#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
+#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
+
+#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
static struct gpio_led rb4xx_leds_gpio[] __initdata = {
{
.name = "rb4xx:yellow:user",
.gpio = RB4XX_GPIO_USER_LED,
.active_low = 0,
+ }, {
+ .name = "rb4xx:green:led1",
+ .gpio = RB4XX_GPIO_CPLD_LED1,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led2",
+ .gpio = RB4XX_GPIO_CPLD_LED2,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led3",
+ .gpio = RB4XX_GPIO_CPLD_LED3,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led4",
+ .gpio = RB4XX_GPIO_CPLD_LED4,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led5",
+ .gpio = RB4XX_GPIO_CPLD_LED5,
+ .active_low = 0,
},
};
-static struct gpio_button rb4xx_gpio_buttons[] __initdata = {
+static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
{
.desc = "reset_switch",
.type = EV_KEY,
.code = KEY_RESTART,
- .threshold = 3,
+ .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
.gpio = RB4XX_GPIO_RESET_SWITCH,
.active_low = 1,
}
}
};
-#if 0
-/*
- * SPI device support is experimental
- */
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition rb4xx_partitions[] = {
+ {
+ .name = "routerboot",
+ .offset = 0,
+ .size = 0x0b000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "hard_config",
+ .offset = 0x0b000,
+ .size = 0x01000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "bios",
+ .offset = 0x0d000,
+ .size = 0x02000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "soft_config",
+ .offset = 0x0f000,
+ .size = 0x01000,
+ }
+};
+#define rb4xx_num_partitions ARRAY_SIZE(rb4xx_partitions)
+#else /* CONFIG_MTD_PARTITIONS */
+#define rb4xx_partitions NULL
+#define rb4xx_num_partitions 0
+#endif /* CONFIG_MTD_PARTITIONS */
+
static struct flash_platform_data rb4xx_flash_data = {
- .type = "pm25lv512",
+ .type = "pm25lv512",
+ .parts = rb4xx_partitions,
+ .nr_parts = rb4xx_num_partitions,
};
-static struct spi_board_info rb4xx_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &rb4xx_flash_data,
- }
+static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
+ .gpio_base = RB4XX_GPIO_CPLD_BASE,
};
-static struct mmc_spi_platform_data rb433_mmc_data = {
+static struct mmc_spi_platform_data rb4xx_mmc_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
};
-static struct spi_board_info rb433_spi_info[] = {
+static struct spi_board_info rb4xx_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
- .platform_data = &rb433_flash_data,
+ .platform_data = &rb4xx_flash_data,
}, {
.bus_num = 0,
- .chip_select = 2,
+ .chip_select = 1,
.max_speed_hz = 25000000,
- .modalias = "mmc_spi",
- .platform_data = &rb433_mmc_data,
+ .modalias = "spi-rb4xx-cpld",
+ .platform_data = &rb4xx_cpld_data,
}
};
-static u32 rb433_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on)
-{
- u32 ret;
-
- if (is_on == AR71XX_SPI_CS_INACTIVE) {
- ret = SPI_IOC_CS0 | SPI_IOC_CS1;
- } else {
- if (cs_high) {
- ret = SPI_IOC_CS0 | SPI_IOC_CS1;
- } else {
- if ((chip_select ^ 2) == 0)
- ret = SPI_IOC_CS1 ^ (SPI_IOC_CS0 | SPI_IOC_CS1);
- else
- ret = SPI_IOC_CS0 ^ (SPI_IOC_CS0 | SPI_IOC_CS1);
- }
+static struct spi_board_info rb4xx_microsd_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 2,
+ .max_speed_hz = 25000000,
+ .modalias = "mmc_spi",
+ .platform_data = &rb4xx_mmc_data,
}
+};
- return ret;
-}
-struct ar71xx_spi_platform_data rb433_spi_data = {
- .bus_num = 0,
- .num_chipselect = 3,
- .get_ioc_base = rb433_spi_get_ioc_base,
+static struct resource rb4xx_spi_resources[] = {
+ {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
};
-static void rb4xx_add_device_spi(void)
-{
- ar71xx_add_device_spi(NULL, rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
-}
-
-static void rb433_add_device_spi(void)
-{
- ar71xx_add_device_spi(&rb433_spi_data, rb433_spi_info,
- ARRAY_SIZE(rb433_spi_info));
-}
-#else
-static inline void rb4xx_add_device_spi(void) {}
-static inline void rb433_add_device_spi(void) {}
-#endif
+static struct platform_device rb4xx_spi_device = {
+ .name = "rb4xx-spi",
+ .id = -1,
+ .resource = rb4xx_spi_resources,
+ .num_resources = ARRAY_SIZE(rb4xx_spi_resources),
+};
static void __init rb4xx_generic_setup(void)
{
ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
rb4xx_leds_gpio);
- ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(rb4xx_gpio_buttons),
- rb4xx_gpio_buttons);
+ ar71xx_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rb4xx_gpio_keys),
+ rb4xx_gpio_keys);
+ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+ platform_device_register(&rb4xx_spi_device);
platform_device_register(&rb4xx_nand_device);
}
static void __init rb411_setup(void)
{
rb4xx_generic_setup();
- rb4xx_add_device_spi();
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
ar71xx_add_device_mdio(0xfffffffc);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.phy_mask = 0x00000003;
MIPS_MACHINE(AR71XX_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
rb411u_setup);
+#define RB433_LAN_PHYMASK BIT(0)
+#define RB433_WAN_PHYMASK BIT(4)
+#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
+
static void __init rb433_setup(void)
{
rb4xx_generic_setup();
- rb433_add_device_spi();
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
- ar71xx_add_device_mdio(0xffffffe9);
+ ar71xx_add_device_mdio(~RB433_MDIO_PHYMASK);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.speed = SPEED_100;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_data.phy_mask = RB433_LAN_PHYMASK;
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.phy_mask = 0x00000010;
+ ar71xx_eth1_data.phy_mask = RB433_WAN_PHYMASK;
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
MIPS_MACHINE(AR71XX_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
rb433u_setup);
+#define RB450_LAN_PHYMASK BIT(0)
+#define RB450_WAN_PHYMASK BIT(4)
+#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
+
static void __init rb450_generic_setup(int gige)
{
rb4xx_generic_setup();
- rb4xx_add_device_spi();
-
- ar71xx_add_device_mdio(0xffffffe0);
+ ar71xx_add_device_mdio(~RB450_MDIO_PHYMASK);
- ar71xx_eth0_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.phy_mask = (gige) ? (1 << 0) : 0;
- ar71xx_eth0_data.speed = (gige) ? SPEED_1000 : SPEED_100;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1);
+ ar71xx_eth0_data.phy_if_mode = (gige) ?
+ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = RB450_LAN_PHYMASK;
- ar71xx_eth1_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.phy_mask = 0x00000010;
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0);
+ ar71xx_eth1_data.phy_if_mode = (gige) ?
+ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = RB450_WAN_PHYMASK;
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
static void __init rb450g_setup(void)
{
rb450_generic_setup(1);
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
}
MIPS_MACHINE(AR71XX_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
static void __init rb493_setup(void)
{
rb4xx_generic_setup();
- rb4xx_add_device_spi();
ar71xx_add_device_mdio(0x3fffff00);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x00000001;
MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
rb493_setup);
+
+#define RB493G_GPIO_MDIO_MDC 7
+#define RB493G_GPIO_MDIO_DATA 8
+
+#define RB493G_MDIO_PHYMASK BIT(0)
+
+static struct mdio_gpio_platform_data rb493g_mdio_data = {
+ .mdc = RB493G_GPIO_MDIO_MDC,
+ .mdio = RB493G_GPIO_MDIO_DATA,
+
+ .phy_mask = ~RB493G_MDIO_PHYMASK,
+};
+
+static struct platform_device rb493g_mdio_device = {
+ .name = "mdio-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rb493g_mdio_data,
+ },
+};
+
+static void __init rb493g_setup(void)
+{
+ ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+ rb4xx_leds_gpio);
+
+ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+ platform_device_register(&rb4xx_spi_device);
+ platform_device_register(&rb4xx_nand_device);
+
+ ar71xx_add_device_mdio(~RB493G_MDIO_PHYMASK);
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
+ ar71xx_eth0_data.speed = SPEED_1000;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
+ ar71xx_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+
+ platform_device_register(&rb493g_mdio_device);
+
+ ar71xx_add_device_eth(1);
+ ar71xx_add_device_eth(0);
+
+ ar71xx_add_device_usb();
+
+ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
+ rb493g_setup);
projects / openwrt / openwrt.git / blobdiff