ar71xx: add missing include for checking kernel version

[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-rb91x.c

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
index 9ef5c4455ebdc40640bb46d27bec312ba8a346f3..e240c3ad43cff9c411e42e9dde4e99105f35aa0a 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
@@ -10,12 +10,17 @@
 
 #define pr_fmt(fmt) "rb91x: " fmt
 
+#include <linux/version.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/ath9k_platform.h>
 #include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
 #include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/74x164.h>
@@ -53,7 +58,7 @@
 #define RB91X_FLAG_USB         BIT(0)
 #define RB91X_FLAG_PCIE                BIT(1)
 
-#define RB91X_LATCH_GPIO_BASE  AR934X_GPIO_COUNT
+#define RB91X_LATCH_GPIO_BASE  32
 #define RB91X_LATCH_GPIO(_x)   (RB91X_LATCH_GPIO_BASE + (_x))
 
 #define RB91X_SSR_GPIO_BASE    (RB91X_LATCH_GPIO_BASE + AR934X_GPIO_COUNT)
@@ -140,7 +145,7 @@ static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = {
        .gpio_nle = RB91X_GPIO_NLE,
 };
 
-static u8 rb711gr100_ssr_initdata[] __initdata = {
+static u8 rb711gr100_ssr_initdata[] = {
        BIT(RB91X_SSR_BIT_PCIE_POWER) |
        BIT(RB91X_SSR_BIT_USB_POWER) |
        BIT(RB91X_SSR_BIT_5)
@@ -152,17 +157,6 @@ static struct gen_74x164_chip_platform_data rb711gr100_ssr_data = {
        .init_data = rb711gr100_ssr_initdata,
 };
 
-static struct ath79_spi_controller_data rb711gr100_spi0_cdata = {
-       .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-       .cs_line = 0,
-       .is_flash = true,
-};
-
-static struct ath79_spi_controller_data rb711gr100_spi1_cdata = {
-       .cs_type = ATH79_SPI_CS_TYPE_GPIO,
-       .cs_line = RB91X_GPIO_SSR_STROBE,
-};
-
 static struct spi_board_info rb711gr100_spi_info[] = {
        {
                .bus_num        = 0,
@@ -170,20 +164,24 @@ static struct spi_board_info rb711gr100_spi_info[] = {
                .max_speed_hz   = 25000000,
                .modalias       = "m25p80",
                .platform_data  = &rb711gr100_spi_flash_data,
-               .controller_data = &rb711gr100_spi0_cdata
        }, {
                .bus_num        = 0,
                .chip_select    = 1,
                .max_speed_hz   = 10000000,
                .modalias       = "74x164",
                .platform_data  = &rb711gr100_ssr_data,
-               .controller_data = &rb711gr100_spi1_cdata
        }
 };
 
+static int rb711gr100_spi_cs_gpios[2] = {
+       -ENOENT,
+       RB91X_GPIO_SSR_STROBE,
+};
+
 static struct ath79_spi_platform_data rb711gr100_spi_data __initdata = {
        .bus_num = 0,
        .num_chipselect = 2,
+       .cs_gpios = rb711gr100_spi_cs_gpios,
 };
 
 static struct gpio_led rb711gr100_leds[] __initdata = {
@@ -221,6 +219,7 @@ static struct gpio_led rb711gr100_leds[] __initdata = {
                .name           = "rb:green:power",
                .gpio           = RB91X_GPIO_LED_POWER,
                .active_low     = 0,
+               .default_state  = LEDS_GPIO_DEFSTATE_KEEP,
        },
 };
 
@@ -233,7 +232,7 @@ static struct at803x_platform_data rb91x_at803x_data = {
 static struct mdio_board_info rb91x_mdio0_info[] = {
        {
                .bus_id = "ag71xx-mdio.0",
-               .phy_addr = 0,
+               .mdio_addr = 0,
                .platform_data = &rb91x_at803x_data,
        },
 };