KERNEL_LOADADDR = 0x80060000
-DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD NETGEAR_ID CMDLINE CONSOLE IMAGE_SIZE
+DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD NETGEAR_ID CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS
define Build/netgear-squashfs
rm -rf $@.fs $@.squashfs
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/mktplinkfw
- $(STAGING_DIR_HOST)/bin/mktplinkfw \
+ -$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
-k $(word 1,$^) \
-r $@ \
-o $@.new \
-j -X 0x40000 \
-a $(call rootfs_align,$(FILESYSTEM)) \
- $(if $(findstring sysupgrade,$1),-s)
- @mv $@.new $@
+ $(if $(findstring sysupgrade,$1),-s) && mv $@.new $@ || rm -f $@
endef
# -c combined image
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
-k $@ \
-o $@.new \
- -s \
+ -s -S \
-c
@mv $@.new $@
endef
+define Build/loader-common
+ rm -rf $@.src
+ $(MAKE) -C lzma-loader \
+ PKG_BUILD_DIR="$@.src" \
+ TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
+ KERNEL_CMDLINE="$(CMDLINE)" BOARD="$(BOARDNAME)" \
+ LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
+ $(1) compile loader.gz
+ mv "$@.gz" "$@"
+ rm -rf $@.src
+endef
+
+define Build/loader-okli-compile
+ $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0)
+endef
+
+define Build/loader-kernel
+ $(call Build/loader-common,LOADER_DATA="$@")
+endef
+
+define Build/loader-okli
+ dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
+ cat "$@" >> "$@.new"
+ mv "$@.new" "$@"
+endef
+
+define Build/copy-file
+ cat "$(1)" > "$@"
+endef
+
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT
+# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
+# UBNT_TYPE e.g. one of (BZ, XM, XW)
+# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
+
+# mkubntimage is using the kernel image direct
+# routerboard creates partitions out of the ubnt header
+define Build/mkubntimage
+ $(STAGING_DIR_HOST)/bin/mkfwimage \
+ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -k $(word 1,$^) \
+ -r $@ \
+ -o $@
+endef
+
+# all UBNT XM device expect the kernel image to have 1024k while flash, when
+# booting the image, the size doesn't matter.
+define Build/mkubntimage-split
+ dd if=$@ of=$@.old1 bs=1024k count=1
+ dd if=$@ of=$@.old2 bs=1024k skip=1
+ $(STAGING_DIR_HOST)/bin/mkfwimage \
+ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -k $@.old1 \
+ -r $@.old2 \
+ -o $@
+ rm $@.old1 $@.old2
+endef
+
+define Build/mkubntimage2
+ $(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
+ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -p jffs2:0x50000:0xf60000:0:0:$@ \
+ -o $@.new
+ @mv $@.new $@
+endef
+
+DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
+
+define Build/mkubntkernelimage
+ rm -rf $(KDIR_TMP)/ubnt-$(KERNEL_IMAGE)/image && \
+ mkdir -p $(KDIR_TMP)/ubnt-$(KERNEL_IMAGE)/image && \
+ cp $@ $(KDIR_TMP)/ubnt-$(KERNEL_IMAGE)/image/kernel0 && \
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --pad --big-endian --squash-uids -v -e 64KiB \
+ -o $@.new \
+ -d $(KDIR_TMP)/ubnt-$(KERNEL_IMAGE)/image \
+ 2>&1 && \
+ $(STAGING_DIR_HOST)/bin/padjffs2 $@.new -J 64
+ -rm -rf $(KDIR_TMP)/ubnt-$(KERNEL_IMAGE)/image
+ @mv $@.new $@
+endef
+
define Device/Default
BOARDNAME :=
DEVICE_PROFILE = $$(BOARDNAME)
CONSOLE = ttyS0,115200
CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
+ COMPILE :=
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
endef
+define Device/tplink-nolzma
+$(Device/tplink)
+ LOADER_FLASH_OFFS := 0x22000
+ COMPILE := loader-$(1).gz
+ COMPILE/loader-$(1).gz := loader-okli-compile
+ KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
+ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel | mktplinkfw-initramfs
+endef
+
+define Device/tplink-4m
+$(Device/tplink-nolzma)
+ TPLINK_FLASHLAYOUT := 4M
+ IMAGE_SIZE := 3904k
+endef
+
+define Device/tplink-8m
+$(Device/tplink-nolzma)
+ TPLINK_FLASHLAYOUT := 8M
+ IMAGE_SIZE := 7936k
+endef
+
define Device/tplink-4mlzma
$(Device/tplink)
TPLINK_FLASHLAYOUT := 4Mlzma
endef
TARGET_DEVICES += archer-c5 archer-c7-v1 archer-c7-v2
+define Device/antminer-s1
+ $(Device/tplink-8mlzma)
+ BOARDNAME := ANTMINER-S1
+ DEVICE_PROFILE := ANTMINER_S1
+ TPLINK_HWID := 0x04440001
+ CONSOLE := ttyATH0,115200
+endef
+
define Device/el-m150
$(Device/tplink-8mlzma)
BOARDNAME := EL-M150
TPLINK_HWID := 0x01530001
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += el-m150 el-mini
+TARGET_DEVICES += antminer-s1 el-m150 el-mini
define Device/gl-inet-6408A-v1
$(Device/tplink-8mlzma)
define Device/tl-wr710n-v1
$(Device/tplink-8mlzma)
- BOARDNAME := TL-WR710NV1
+ BOARDNAME := TL-WR710N
DEVICE_PROFILE := TLWR710
TPLINK_HWID := 0x07100001
CONSOLE := ttyATH0,115200
define Device/tl-wr710n-v2
$(Device/tplink-4mlzma)
- BOARDNAME := TL-WR710NV2
+ BOARDNAME := TL-WR710N
DEVICE_PROFILE := TLWR710
- TPLINK_HWID := 0x07100001
+ TPLINK_HWID := 0x07100002
CONSOLE := ttyATH0,115200
endef
TPLINK_HWID := 0x07200103
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += tl-wr703n-v1 tl-wr710n-v1 tl-wr710n-v2 tl-wr720n-v3
+
+define Device/tl-wr720n-v4
+ $(Device/tplink-4mlzma)
+ BOARDNAME := TL-WR720N-v3
+ DEVICE_PROFILE := TLWR720
+ TPLINK_HWID := 0x07200104
+ CONSOLE := ttyATH0,115200
+endef
+TARGET_DEVICES += tl-wr703n-v1 tl-wr710n-v1 tl-wr710n-v2 tl-wr720n-v3 tl-wr720n-v4
define Device/tl-wr740n-v4
$(Device/tplink-4mlzma)
CONSOLE := ttyATH0,115200
endef
+define Device/tl-wr741nd-v1
+ $(Device/tplink-4m)
+ BOARDNAME := TL-WR741ND
+ DEVICE_PROFILE := TLWR741
+ TPLINK_HWID := 0x07410001
+endef
+
+define Device/tl-wr741nd-v2
+ $(Device/tplink-4m)
+ BOARDNAME := TL-WR741ND
+ DEVICE_PROFILE := TLWR741
+ TPLINK_HWID := 0x07410001
+endef
+
define Device/tl-wr741nd-v4
$(Device/tplink-4mlzma)
BOARDNAME := TL-WR741ND-v4
TPLINK_HWID := 0x07430002
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += tl-wr740n-v4 tl-wr741nd-v4 tl-wr743nd-v2
+TARGET_DEVICES += tl-wr740n-v4 tl-wr741nd-v1 tl-wr741nd-v2 tl-wr741nd-v4 tl-wr743nd-v2
define Device/tl-wr841n-v8
$(Device/tplink-4mlzma)
endef
TARGET_DEVICES += oolite
+# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
+# UBNT_TYPE e.g. one of (BZ, XM, XW)
+# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
+define Device/ubnt-xm
+ DEVICE_PROFILE := UBNT
+ IMAGE_SIZE := 7552k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
+ UBNT_TYPE := XM
+ UBNT_BOARD := XM
+ UBNT_CHIP := ar7240
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
+ IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+endef
+
+define Device/ubnt-xw
+ DEVICE_PROFILE := UBNT
+ IMAGE_SIZE := 7552k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
+ UBNT_TYPE := XW
+ UBNT_BOARD := XM
+ UBNT_CHIP := ar934x
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
+ IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+endef
+
+define Device/ubnt-bz
+ DEVICE_PROFILE := UBNT
+ IMAGE_SIZE := 7552k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
+ UBNT_TYPE := BZ
+ UBNT_BOARD := XM
+ UBNT_CHIP := ar934x
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
+ IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+endef
+
+define Device/rw2458n
+ $(Device/ubnt-xm)
+ BOARDNAME := RW2458N
+endef
+
+define Device/ubnt-airrouter
+ $(Device/ubnt-xm)
+ BOARDNAME := UBNT-AR
+endef
+
+define Device/ubnt-bullet-m
+ $(Device/ubnt-xm)
+ BOARDNAME := UBNT-BM
+endef
+
+define Device/ubnt-rocket-m
+ $(Device/ubnt-xm)
+ BOARDNAME := UBNT-RM
+endef
+
+define Device/ubnt-nano-m
+ $(Device/ubnt-xm)
+ BOARDNAME := UBNT-NM
+endef
+TARGET_DEVICES += rw2458n ubnt-airrouter ubnt-bullet-m ubnt-rocket-m ubnt-nano-m
+
+define Device/ubnt-unifi
+ $(Device/ubnt-bz)
+ BOARDNAME := UBNT-UF
+ DEVICE_PROFILE := UBNT UBNTUNIFI
+endef
+
+define Device/ubnt-unifi-outdoor
+ $(Device/ubnt-bz)
+ BOARDNAME := UBNT-U20
+ DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
+endef
+TARGET_DEVICES += ubnt-unifi ubnt-unifi-outdoor
+
+define Device/ubnt-nano-m-xw
+ $(Device/ubnt-xw)
+ BOARDNAME := UBNT-NM-XW
+endef
+
+define Device/ubnt-loco-m-xw
+ $(Device/ubnt-xw)
+ BOARDNAME := UBNT-LOCO-XW
+endef
+
+define Device/ubnt-rocket-m-xw
+ $(Device/ubnt-xw)
+ BOARDNAME := UBNT-RM-XW
+endef
+TARGET_DEVICES += ubnt-nano-m-xw ubnt-loco-m-xw ubnt-rocket-m-xw
+
+define Device/ubnt-air-gateway
+ $(Device/ubnt-xm)
+ BOARDNAME := UBNT-AGW
+ UBNT_BOARD := XM
+ UBNT_TYPE := AirGW
+ UBNT_CHIP := ar933x
+ CONSOLE = ttyATH0,115200
+endef
+TARGET_DEVICES += ubnt-air-gateway
+
+define Device/ubdev01
+ $(Device/ubnt-xm)
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
+ BOARDNAME := UBNT-UF
+ UBNT_BOARD := XM
+ UBNT_TYPE := XM
+ UBNT_CHIP := ar7240
+endef
+
+TARGET_DEVICES += ubdev01
+
+define Device/ubnt-routerstation
+ IMAGE_SIZE := 16128k
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin = append-rootfs | pad-rootfs | mkubntimage
+ IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
+ KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
+endef
+
+define Device/ubnt-rs
+$(Device/ubnt-routerstation)
+ BOARDNAME := UBNT-RS
+ DEVICE_PROFILE := Madwifi UBNT UBNTRS
+ UBNT_BOARD := RS
+ UBNT_TYPE := RSx
+ UBNT_CHIP := ar7100
+endef
+
+define Device/ubnt-rspro
+$(Device/ubnt-routerstation)
+ BOARDNAME := UBNT-RSPRO
+ DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO
+ UBNT_BOARD := RSPRO
+ UBNT_TYPE := RSPRO
+ UBNT_CHIP := ar7100pro
+endef
+
+define Device/ubnt-ls-sr71
+$(Device/ubnt-routerstation)
+ BOARDNAME := UBNT-LS-SR71
+ DEVICE_PROFILE := Madwifi UBNT
+ UBNT_BOARD := LS-SR71
+ UBNT_TYPE := LS-SR71
+ UBNT_CHIP := ar7100
+endef
+
+TARGET_DEVICES += ubnt-rs ubnt-rspro ubnt-ls-sr71
+
+define Device/ubnt-uap-pro
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
+ UBNT_TYPE := BZ
+ UBNT_CHIP := ar934x
+ BOARD_NAME := UAP-PRO
+ DEVICE_PROFILE := UBNT UAPPRO
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | mkubntkernelimage
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage2
+endef
+
+define Device/ubnt-unifi-outdoor-plus
+$(Device/ubnt-uap-pro)
+ UBNT_CHIP := ar7240
+ BOARD_NAME := UBNT-UOP
+ DEVICE_PROFILE := UBNT
+endef
+
+TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus
+
rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
# $(1): rootfs type.
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
endef
+#
+# Embed patched lzma-compressed kernel inside lzma-loader.
+#
+# Specifying the command line via the lzma-loader doesn't work with some
+# models (like the TP-LINK CPE series), so this version first patches the
+# command line in the image and then builds the loader around it.
+#
+# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
+# $(2), suffix of target file to build, e.g. bin, gz, elf
+# $(3), kernel command line to pass from lzma-loader to kernel
+# $(4), unused here
+# $(5), suffix of kernel filename, e.g. -initramfs, or empty
+define Image/BuildLoaderPatched
+ $(call PatchKernelLzma,$(1),$(3))
+ -rm -rf $(KDIR)/lzma-loader
+ $(LOADER_MAKE) LOADER=loader-$(1).$(2) \
+ LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
+ LOADER_DATA="$(KDIR_TMP)/vmlinux-$(1)$(5).bin.lzma" BOARD="$(1)" \
+ compile loader.$(2)
+ -$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
+endef
+
#
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
# uImage header with magic "OKLI" at boot time.
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
+epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art)
ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware)
+mr12_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware)
+mr16_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware)
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
+wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
-mkdir -p $(KDIR_TMP)
$(call Image/Build/Profile/$(IMAGE_PROFILE),buildkernel)
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+endef
+
+define Image/BuildKernel/Initramfs
cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
$(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
$(call Image/Build/Initramfs)
-endif
endef
Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
fi
endef
-
-Image/Build/UAPPRO/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(uap_pro_mtdlayout))
-
-define Image/Build/UAPPRO/buildkernel
- $(call MkuImageLzma,$(2),$(3) $(uap_pro_mtdlayout))
- -rm -rf $(KDIR_TMP)/$(2)
- mkdir -p $(KDIR_TMP)/$(2)/image
- cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/kernel0
- $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
- --pad --big-endian --squash-uids -v -e 64KiB \
- -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
- -d $(KDIR_TMP)/$(2)/image \
- 2>&1 1>/dev/null | awk '/^.+$$$$/'
- -rm -rf $(KDIR_TMP)/$(2)
- $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR_TMP)/$(2)-kernel.jffs2 -J 64
-endef
-
-define Image/Build/UAPPRO
- $(call CatFiles,$(KDIR_TMP)/$(2)-kernel.jffs2,1572864,$(KDIR)/root.$(1),14548992,$(call sysupname,$(1),$(2)))
- -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(5).$(6).v6.0.0-OpenWrt-$(REVISION) \
- -p jffs2:0x50000:0xf60000:0:0:$(call sysupname,$(1),$(2)) \
- -o $(call factoryname,$(1),$(2))
-endef
-
-# $(4) = board (XS2, XS5, RS, XM)
-# $(5) = series (BZ, XM, XW)
-# $(6) = chip (ar7240, ar934x)
-define Image/Build/UBNT2
- $(eval fwsize=$(call mtdpartsize,firmware,$(3)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- dd if=$(call sysupname,$(1),$(2)) of=$(KDIR_TMP)/$(2)-mtdpart-kernel.bin bs=1024k count=1; \
- dd if=$(call sysupname,$(1),$(2)) of=$(KDIR_TMP)/$(2)-mtdpart-rootfs.bin bs=1024k skip=1; \
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(4) -v $(5).$(6).v6.0.0-OpenWrt-$(REVISION) \
- -k $(KDIR_TMP)/$(2)-mtdpart-kernel.bin \
- -r $(KDIR_TMP)/$(2)-mtdpart-rootfs.bin \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-Image/Build/UBNTXM/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(ubntxm_mtdlayout))
-Image/Build/UBNTXM/buildkernel=$(call MkuImageLzma,$(2),$(3) $(ubntxm_mtdlayout))
-Image/Build/UBNTXM=$(call Image/Build/UBNT2,$(1),$(2),$(ubntxm_mtdlayout),$(4),$(5),$(6),$(7))
-
-Image/Build/UBDEV/buildkernel=$(call MkuImageLzma,$(2),$(3) $(ubdev_mtdlayout))
-Image/Build/UBDEV=$(call Image/Build/UBNT2,$(1),$(2),$(ubdev_mtdlayout),$(4),$(5),$(6),$(7))
-
-
-Image/Build/UBNT/buildkernel=$(call PatchKernelLzma,$(2),$(3))
-
-define Image/Build/UBNT
- dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma of=$(KDIR_TMP)/vmlinux-$(2).lzma bs=64k conv=sync
- -$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(4) -v $(5).$(6).OpenWrt.$(REVISION) \
- -k $(KDIR_TMP)/vmlinux-$(2).lzma \
- -r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
- -o $(call factoryname,$(1),$(2))
- -sh $(TOPDIR)/scripts/combined-image.sh \
- "$(KDIR_TMP)/vmlinux-$(2).lzma" \
- "$(BIN_DIR)/$(IMG_PREFIX)-root.$(1)" \
- $(call sysupname,$(1),$(2))
-endef
-
-
Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
endef
-Image/Build/TPLINK-SAFELOADER/buildkernel=$(call PatchKernelLzma,$(2),$(3) $(4))
+Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3))
define Image/Build/TPLINK-SAFELOADER
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(2).elf\
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- LOADER_DATA="$(KDIR_TMP)/vmlinux-$(2).bin.lzma" BOARD="$(2)" \
- compile loader.elf
+ [ -e "$(KDIR)/loader-$(2).elf" ]
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(5) \
$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,MR12,mr12,MR12,ttyS0,115200,$$(mr12_mtdlayout),RKuImage))
+$(eval $(call SingleProfile,AthLzma,64k,MR16,mr16,MR16,ttyS0,115200,$$(mr16_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
+$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWA901NV2,tl-wa901nd-v2,TL-WA901ND-v2,ttyS0,115200,0x09010002,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR740NV1,tl-wr740n-v1,TL-WR741ND,ttyS0,115200,0x07400001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR740NV3,tl-wr740n-v3,TL-WR741ND,ttyS0,115200,0x07400003,1,4M))
-$(eval $(call SingleProfile,TPLINK,64kraw,TLWR741NV1,tl-wr741nd-v1,TL-WR741ND,ttyS0,115200,0x07410001,1,4M))
-$(eval $(call SingleProfile,TPLINK,64kraw,TLWR741NV2,tl-wr741nd-v2,TL-WR741ND,ttyS0,115200,0x07410001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR743NV1,tl-wr743nd-v1,TL-WR741ND,ttyS0,115200,0x07430001,1,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR841NV3,tl-wr841nd-v3,TL-WR941ND,ttyS0,115200,0x08410003,3,4M))
$(eval $(call SingleProfile,TPLINK,64kraw,TLWR841NV5,tl-wr841nd-v5,TL-WR741ND,ttyS0,115200,0x08410005,1,4M))
$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
-$(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
-$(eval $(call SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-UOP,ttyS0,115200,BZ,BZ,ar7240))
-
-$(eval $(call SingleProfile,UBDEV,64kraw,UBDEV01,ubdev01,UBNT-UF,ttyS0,115200,XM,XM,ar7240))
-
-$(eval $(call SingleProfile,UBNT,64k,UBNTRS,ubnt-rs,UBNT-RS,ttyS0,115200,RS,RSx,ar7100))
-$(eval $(call SingleProfile,UBNT,64k,UBNTRSPRO,ubnt-rspro,UBNT-RSPRO,ttyS0,115200,RSPRO,RSPRO,ar7100pro))
-$(eval $(call SingleProfile,UBNT,64k,UBNTLSSR71,ubnt-ls-sr71,UBNT-LS-SR71,ttyS0,115200,LS-SR71,LS-SR71,ar7100))
-
-$(eval $(call SingleProfile,UBNTXM,64kraw,RW2458N,rw2458n,RW2458N,ttyS0,115200,XM,XM,ar7240))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTAIRROUTER,ubnt-airrouter,UBNT-AR,ttyS0,115200,XM,XM,ar7240))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTBULLETM,ubnt-bullet-m,UBNT-BM,ttyS0,115200,XM,XM,ar7240))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTROCKETM,ubnt-rocket-m,UBNT-RM,ttyS0,115200,XM,XM,ar7240))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTROCKETMXW,ubnt-rocket-m-xw,UBNT-RM-XW,ttyS0,115200,XM,XW,ar934x))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOM,ubnt-nano-m,UBNT-NM,ttyS0,115200,XM,XM,ar7240))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFI,ubnt-unifi,UBNT-UF,ttyS0,115200,XM,BZ,ar7240))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFIOUTDOOR,ubnt-unifi-outdoor,UBNT-U20,ttyS0,115200,XM,BZ,ar7240))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOMXW,ubnt-nano-m-xw,UBNT-NM-XW,ttyS0,115200,XM,XW,ar934x))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTLOCOXW,ubnt-loco-m-xw,UBNT-LOCO-XW,ttyS0,115200,XM,XW,ar934x))
-$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTAIRGW,ubnt-air-gateway,UBNT-AGW,ttyATH0,115200,XM,AirGW,ar933x))
-
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
$(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2))
$(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
$(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
-$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTROCKETMXW UBNTNANOM UBNTNANOMXW UBNTLOCOXW UBNTUNIFI UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO UBNTAIRGW))
$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
$(eval $(call MultiProfile,WPJ344,WPJ344_16M))
+$(eval $(call MultiProfile,WPJ531,WPJ531_16M))
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))
-$(eval $(call MultiProfile,Madwifi,EAP7660D UBNTRS UBNTRSPRO UBNTLSSR71 WP543))
+$(eval $(call MultiProfile,Madwifi,EAP7660D WP543))
endif # ifeq ($(SUBTARGET),generic)
ifeq ($(SUBTARGET),nand)
projects / openwrt / openwrt.git / blobdiff